Brand Name
BTU Heat
Voltage
AFUE
Configuration
Stages
Communicating
Motor Type
CFM
Width
|◀ 121 - 132 of 294 ▶|
View:
  • Up to 98% AFUE in upflow and horizontal positions Up to 96.7% AFUE in downflow
  • Modulating heating operation (40% - 100% capacity)
  • ION Communicating Control System
  • Observer Communicating Control System
  • Xtra SEER Variable Speed ECM blower motor
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

  • Item#:
    F97CMN0801714B
    Manufacturer Item:
    F97CMN0801714B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 96% AFUE in upflow and horizontal positions
  • 95% AFUE in downflow position
  • All models earn the ENERGY STAR
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

    International Comfort Products F96VTN0601716B

  • Item#:
    F96VTN0601716B
    Manufacturer Item:
    F96VTN0601716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 96% AFUE in upflow and horizontal positions
  • 95% AFUE in downflow position
  • All models earn the ENERGY STAR
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

    International Comfort Products F96VTN1202422B

  • Item#:
    F96VTN1202422B
    Manufacturer Item:
    F96VTN1202422B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 98% AFUE in upflow and horizontal positions
  • Up to 96.7% AFUE in downflow
  • Modulating heating operation (40% - 100% capacity)
  • ION Communicating Control System
  • Observer Communicating Control System
  • Xtra SEER Variable Speed ECM blower motor
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

  • Item#:
    F97CMN0802120B
    Manufacturer Item:
    F97CMN0802120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Quiet performance
  • Variable-speed, constant airflow (VCA) ECM blower motor and two-stage gas valve also provide enhanced levels of temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • Wi-Fi enabled remote access with the Ion System Control
  • 10-Year No Hassle Replacement Limited Warranty
  • 10-Year Parts Limited Warranty upon timely registration
  • Lifetime Heat Exchanger Limited Warranty upon timely registration

  • Item#:
    F80CTL0451712B
    Manufacturer Item:
    F80CTL0451712B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 96% AFUE in upflow and horizontal positions
  • 95% AFUE in downflow position
  • All models earn the ENERGY STAR
  • Two-stage heating operation
  • Variable-speed, constant torque ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Item#:
    F96VTN0601412B
    Manufacturer Item:
    F96VTN0601412B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.
    • Integrated coil cabinet for easy air conditioning installation
    • Aluminized steel primary heat exchanger
    • Stainless steel secondary heat exchanger
    • Silicon nitride igniter for quiet and consistent light-off
    • 2-piece top design for easy access to vent pipes
    • Concentric vent kit available using existing roof jack and standard base
    • PVC venting
    • Lifetime heat exchanger warranty and 10 years parts warranty

      thermo pride gmd2-80n

    Item#:
    GMD2-80N
    Manufacturer Item:
    GMD2-80N
    Manufacturer:
    THERMO PRODUCTS, LLC
    Item#:
    GMA1-75D48N
    Manufacturer Item:
    GMA1-75D48N
    Manufacturer:
    THERMO PRODUCTS, LLC
    Quiet performance
  • Variable-speed, constant airflow (VCA) ECM blower motor and two-stage gas valve also provide enhanced levels of temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • Wi-Fi enabled remote access with the Ion System Control
  • 10-Year No Hassle Replacement Limited Warranty
  • 10-Year Parts Limited Warranty upon timely registration
  • Lifetime Heat Exchanger Limited Warranty upon timely registration

  • Item#:
    F80CTL1352422B
    Manufacturer Item:
    F80CTL1352422B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    F9MXE Steel 1-Stage Mainline Gas Furnace, 96% AFUE, 115 VAC,
    • Extra SEER variable speed ECM blower motor
    • Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1" WC with all present air inlets, air outlets and condensate drain ports sealed
    • Tougher - flame roll-out sensors standard, adjustable heating blower off delay, factory set blower on delay, stainless steel secondary heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, high quality, corrosion-resistant, preprinted steel cabinet
    • Direct vent (2-pipe), single pipe venting or ventilated combustion air
    • 24 VAC humidifier terminal and electronic air cleaner terminal
    • Innovative knobs for easy door removal and secure attachment
    • Through the casing flue pipe for counterflow or horizontal applications with accessory
    • Slide out heat exchanger and blower assembly
    • Insulated blower compartment
    • Self diagnostics with super bright LED
    • 4-position - upflow/downflow/horizontal installation
    • ECM blower motor
    • Extra AFUE efficiency
    • 1 year no hassle replacement, 5 years parts and lifetime heat exchanger limited warranty with timely registration
    • 4.5 - 13.6" WC inlet gas pressure
    Item#:
    F9MXE0401410
    Manufacturer Item:
    F9MXE0401410A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 98% AFUE in upflow and horizontal positions Up to 96.7% AFUE in downflow
  • Modulating heating operation (40% - 100% capacity)
  • ION Communicating Control System
  • Observer Communicating Control System
  • Xtra SEER Variable Speed ECM blower motor
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

  • Item#:
    F97CMN0602120B
    Manufacturer Item:
    F97CMN0602120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.
    • Integrated coil cabinet for easy air conditioning installation
    • Aluminized steel primary heat exchanger
    • Stainless steel secondary heat exchanger
    • Silicon nitride igniter for quiet and consistent light-off
    • 2-piece top design for easy access to vent pipes
    • Concentric vent kit available using existing roof jack and standard base
    • PVC venting
    • Lifetime heat exchanger warranty and 10 years parts warranty
    Item#:
    GMD2-60N
    Manufacturer Item:
    GMD2-60N
    Manufacturer:
    THERMO PRODUCTS, LLC
    |◀ 121 - 132 of 294 ▶|
    View: