Current Selected Location - Sid Harvey Garden City (0999) Garden City NY

Yellow Jacket Plus II BCA-48 Heavy-Duty Combination Charging and VAC uum,

Yellow Jacket Plus II BCA-60 Heavy-Duty Combination Charging and VAC uum,

Yellow Jacket N8-61 Charging Hose Heavy Duty 1/4" x 60",

Yellow Jacket 20636 Charging Hose Heavy Duty 3/8" Flare x 36",

Suitable for R410A, R134a, R-22 and other refrigerants, 1/4 SAE fittings with 45° bend on one end, Leak-proof eight-sided crimp

JB Industries Kobra CCLV4-60 Hose with Ball Valve Whip End, 1/4", 5 CLV series hoses feature a ball valve 6" whip end that opens to full flow. Our patent pending design of the fittings features a hood that locks the gasket into the fitting with a straight edge to straight edge force that eliminates the blowout of the gasket. The barbed depressor locks into the gasket, exuding more outward force and pushing the gasket further into place. This depressor is precisely machined for maximum flow and has a dimple that guides the valve core into place. Kobra high pressure hoses are made from Kevlar - the same material that stops bullets in bullet-proof vests. Kevlar makes our hoses strong and flexible, while the nitrile cover extends the life of the hoses better than neoprene. Kobra hoses are made in the USA.,
,

JB Industries CCLS60 Charging Hose 1/4" x 5' 3 Pack,
,

Instrument Type R ,
,

CPS Products HP3E Charging Hoses W/ Valve Red/Yellow/Blue 1/4

Yellow Jacket 21012 Charging Hose Yellow 1/4" x 12",

Fieldpiece Instruments S365 Charging JacketCharging Jacket is a reliable way to charge TXV systems in cold weather. Normally, low temperatures remove too much heat from the condenser coils, so HVACR professionals should only work on TXV systems when the outside air temperature is 70 deg F or higher. Now, the new Fieldpiece Charging Jacket solves that problem, and TXV systems can be accurately charged down to 37 deg F outside temps. It's the perfect tool to dramatically extend the hours in a day, and the days in a year, where techs can install, service, and charge TXV systems. Made from parachute-grade material, the Charging Jacket is attached to the top of a split TXV system with hooks, so that the air inlet is not restricted. Then the unit is turned on the jacket puffs up from the air being forced out of the air outlet. The top is then adjusted with a drawstring until the proper pressure differential is reached between the high and low side (between 160 psi and 220 psi for R410A; and between 100 psi and 145 psi for R22). Once the systems stabilizes for 15 minutes at the correct pressure differential, the system is ready to be charged.

• Charge TXV systems in cold weather
• Charge TXV systems from 37 - 70 deg F outside
• Service maintenance contracts before and after the summer heat
• Easy to adjust to reach correct pressure differential
• Great way to increase business during the slow season
• Field tested for accuracy
• Looks professional
• Extend billable hours
• There is no other product on the market made specifically for this purpose
• Currently, HVACR professionals either do not work on TxV systems if it is below 70 deg F outside, or, if it's an emergency techs might use their actual jackets or cardboard to block the air inlet
• The problem is those methods are inaccurate
• The charging jacket's advantage is that it works to bring the pressure drop across the TxV to at least 160 psi and therefore has the same effect on the system as higher temperatures do
• HVACR professionals can now dramatically extend their billable hours because they can work on systems during the off season
• So instead of having the do service contract check-ups during the summer rush, service and maintenance can be start early in the spring, and continue late into the fall
• And even year-round in many parts of the country
• Parachute grade

,
,

JB Industries DS-20000 Electronic Refrigerant Charging Scale, 220 lb, Digital Display

• Solid state load cell accurate to 1/4 oz/10 g without need of cylinder directly on center of weighing platform
• LCD screen on a handheld can be read from a distance or in direct sunlight
• Pieces are modularized so parts are easily replaced without need to purchase entirely new unit
• Displays weight in decimal pounds, pounds and ounces and kilograms
• Auto shut-off after 30 min to preserve battery and can be disabled
• Optional charging module (DS-MOD) turns the Atlas into a charging station without the cylinder ever leaving the weighing platform, transfers up to 999 lb in charging increments of 1/4 oz (10 g)
• Carrying Case, Battery and Instructions

Sid Harvey Item #:DS-20000: Replaces Part #:'s : 41223,
,