M12 ROVER Service & Repair Flood Light w/ USB Charging gives you a flexible light source made for any environment, in any orientation. The light provides 700 lumens of TRUEVIEW High Definition Output, is capable of lighting up a workspace for up to 24 hours at a time with an M12 XC4.0Ah Battery Pack, and features a light head that pivots 110° for you to orient the light in multiple directions. The light comes equipped with a strong rear-facing magnet made for jobsite surfaces like steel studs, I-Beams, and job boxes. The lights streamlined base gives you a handheld option for inspection lighting. A 2.1Amp USB port is included with the cordless rechargeable LED floodlight for charging a phone or external device. The ROVER Flood Light features an integrated keyhole for hanging capability on non-metallic surfaces. This compact pivoting floodlight has an IP54 rating for dust and water resistance, has an impact-resistant lens protecting the LEDs, and can survive up to 9ft drops. MILWAUKEE ROVER floodlights are built to go anywhere and withstand anything.

Milwaukee Tools 2367-20

M12 Plastic Pipe Shear Kit with the powerful M12 12-Volt Lithium-Ion battery included can slice through 2 inch schedule 80 PVC in just 3 seconds. The pipe shear kit is compatible with M12 lithium-ion batteries, giving you more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact and water and rust resistant. The ultra- sharp M12 plastic pipe shear with pierce point makes burr-free cuts, allowing you to cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade for maximum efficiency on repetitive cuts. The MILWAUKEE plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time provide you with superior versatility and productivity. In addition to the pipe shear, this kit includes one M12 REDLITHIUM CP1.5 battery pack, an M12 Lithium-Ion battery charger, and a carrying case.

Milwaukee Tools 2470-21

M12 Plastic Pipe Shear can slice through 2 inch schedule 80 PVC in just 3 seconds. The cordless plastic pipe shear is compatible with M12 lithium-ion batteries (not included), providing you with more than 200 cuts on a single charge. The stainless steel blade and aluminum jaw are impact, water and rust resistant. The ultra- sharp MILWAUKEE M12 plastic pipe shear with pierce point makes burr-free cuts, helping you cut faster, cleaner and closer than traditional shears. PVC close to a wall or mounted to a stud is no challenge for the quick-return, offset blade providing you with maximum efficiency on repetitive cuts. The plastic pipe shear features a variable speed trigger for controlled cuts in warm and cold weather and an on-board fuel gauge that displays remaining battery charge and run time, giving you the versatility and productivity you need

Jaw Kit for the M12 FORCE LOGIC Press Tool provides a complete carbon and stainless-steel press solution for the residential and light commercial plumbing and heating contractor. The Jaws are designed for the highest standard of press quality on Iron Pipe Size (IPS) press fittings. Designed for use with the M12 FORCE LOGIC Press Tool, these jaws offer you the lightest solution in the industry for pressing Schedule 5 to Schedule 40 IPS carbon and stainless steel fittings. The MILWAUKEE M12 FORCE LOGIC Press Tool features an inline design allowing you to operate one-handed for unrivaled access in tight spaces.

Milwaukee Tools 49-16-2496

Milwaukee Tool Force Logic M12 Cordless Press Tool Kit, 5 sec Crimp Time,,

Milwaukee Tools 2473-22

M12 Stick Transfer Pump delivers superior filtration for uninterrupted pumping in catch basins, water meter boxes, trenches, sump pump pits, and more. Featuring a 36 submersible aluminum barrel, this transfer pump provides the extension needed to reach water at the bottom of trenches and difficult to reach areas. Equipped with HydroPass filter technology, its 360° filter maximizes flow in heavy debris, minimizing downtime caused by clogging. Powered by our M12 battery platform, this water transfer pump eliminates repetitive manual pumping and improves control, requiring only one hand to pump, freeing the other to control the outflow. With a 15ft max head height and an outlet compatible with a standard ¾ garden hose, this pump delivers the power to push water farther - out of pits and basins, over walls, and to the ideal deposit location. Compatible with all of our M12 REDLITHIUM Batteries this pump keeps you productive, effortlessly pumping up to 9 gallons per minute and 275 gallons on (1) M12 REDLITHIUM XC4.0 battery.

M12 TRAPSNAKE 6 ft. Toilet Auger Kit is the ideal solution for service plumbers and facility maintenance crews to unclog toilets and floor traps. Powered by the M12 TRAPSNAKE Driver, the first powered unit optimized for the challenges of porcelain fixtures, this unit delivers power and speed to work through tough clogs in tight traps. Optimized electronics protect the fixture from the auger and allow the user to feel when engaged with a blockage to aid in retrieving. The M12 TRAPSNAKE 6' Toilet Auger features several industry-firsts including a fixed rubber boot for maximum porcelain protection, an integrated locking mechanism that holds the cable in place for easy telescoping extension, and replaceable cables to maximize the longevity of the tool. As part of the TRAPSNAKE Porcelain Auger System, users can interchange the M12 TRAPSNAKE Driver with the auger handle or use with other auger attachments for versatility and capabilities never seen before in a closet auger. This kit includes an M12 TRAPSNAKE Driver, one M12 REDLITHIUM CP 1.5 Battery Pack, and an M12 Battery Charger.

M12 Trouble Light w/ USB Charging Light delivers you over 2 full days of light and features a 2.1A USB Port for USB charging anywhere. When paired with our M12 REDLITHIUM XC4.0 battery, this LED trouble light provides up to 67 hours of run-time on low mode, and a full workday of light (8 hours) on high mode. It features a rotating collar that adjusts the light angle from task to area lighting and two stainless steel hanging hooks for maximum versatility. With 400 Lumens of TRUEVIEW High Definition Output, it delivers unmatched light output to illuminate work areas. The cordless trouble light also includes a high power 2.1A USB port to quickly charge tablets, smart phones, and other electronic devices. With a rugged design and an impact-resistant lens, the rechargeable LED trouble light is built to withstand abusive job site conditions. The MILWAUKEE M12 Trouble Light w/ USB Charging is compatible with all of our M12 REDLITHIUM batteries (sold separately) and carries a Limited Lifetime LED Warranty so the LEDs never need to be replaced.

M12 FUEL 16-Gauge Variable Speed Nibbler is a compact light weight tool that provides the same cutting capacity as its 18V competitors on a 12V system. Delivering fast clean cuts in 16-gauge mild steel, the nibbler is rated for 18-gauge stainless steel and 12-gauge aluminum. Our M12 FUEL 16-Gauge Variable Speed Nibbler has the power to perform in heavy applications such as cutting up to 22-gauge spiral duct seams. The nibbler tool provides a variable speed dial, tool-free die holder orientation change, and LED work light offers maximum control and productivity. The unique chip collection bag, kitted with the tool, reduces jobsite cleanup. Our compact and light weight form factor enables greater access and mobility on the jobsite.

M12 Variable Speed Polisher/Sander. Optimized to provide the fastest and most precise detail work, the new tool performs the work of two tools in one by easily switching between polishing and sanding modes. As the most compact cordless polisher on the market, the M12 Polisher/Sander is the perfect complement to a full size polisher for a faster finish. Featuring Dual Mode Control and a variable speed trigger, the M12 Polisher/Sander delivers increased user control, regardless of the application. A tool-free accessory change allows the user to quickly change between polishing and sanding accessories.

Work Light lasts 600X longer than conventional incandescent bulb work lights. The LED work light is powered by M12 REDLITHIUM batteries, running up to 4X longer on a single charge. The work light features a 90° rotating head that allows you to easily direct the light beam at the desired work area. Our work light features TRUEVIEW High Definition Output that provides an even beam pattern for clearer visibility and the integrated magnet allows for hands-free use. The cordless work light features a sealed aluminum head to provide impact and weather resistance and comes with a limited lifetime LED warranty and the LEDs never need to be replaced.

Press Jaws are designed for use with Viega MegaPress, "Apollo" PowerPress and other press fitting systems to unlock a more efficient alternative to threading and welding. The IPS-P Jaw and Ring Kit is optimized for use with our M18 FORCE LOGIC Press Tools to press connections on 1/2"-1" schedule 5 up to schedule 40 black iron pipe and 304/316 stainless steel pipe. The ring jaw connects directly to M18 FORCE LOGIC Press Tools, providing you with secure joints in one cycle. The 1/2"-1" IPS-P Press Jaw Kit combined with M18 FORCE LOGIC Press Tools has the lightest in-line design giving you unrivaled access in tight spaces and around installed pipes, providing you with controlled, flameless steel connections for unmatched productivity.