Home  > SOLDERS(x)
|◀ 37 - 48 of 49 ▶|
View:
Harris T720-53 Soldering Flux 32 oz Bottle,
,


Item#:
T720-53
Manufacturer Item:
SCLF32
Manufacturer:
SOLDERS
Harris T720-50 A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder.
  • Not recommended for use in electrical or electronic applications
  • Fumes and gases and vapors can be hazardous to your health
  • Flux is corrosive, may be harmful or fatal if inhaled or swallowed
  • Flux causes skin and eye burns
  • Do not taste or swallow
  • Keep out of the reach of children
  • Heat rays, (infrared radiation) from flame or hot metal can injure eyes
Sid Harvey Item #:T720-50: Replaces Part #:'s : 14951,
,



Harris T720-50

Item#:
T720-50
Manufacturer Item:
SCLF4
Manufacturer:
SOLDERS
Designed primarily for copper to copper and copper to brass connections the paste form is ideal for soldering tube joints. Not recommended for electrical or electronic applications due to the potential corrosive residue of the flux. Stay Clean paste flux works well with most leaded and lead-free solder compositions. Flux residue should be removed after soldering.
Sid Harvey Item #:T720-25A: Replaces Part #:'s : 14954,
,



Harris T720-25A

Item#:
T720-25A
Manufacturer Item:
SCPF4
Manufacturer:
SOLDERS
Both Stay Brite and Stay Brite 8 produce an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat. Stay Brite solders bond with all of the ferrous and nonferrous alloys. Joints soldered with Stay Brite solders exhibit considerably higher than necessary elongation for sound, dissimilar metal joints and vibration applications.
Sid Harvey Item #:T720-12: Replaces Part #:'s : 15207,
,


Item#:
T720-12
Manufacturer Item:
SB861
Manufacturer:
SOLDERS
Stay Brite solders bond with all of the ferrous and nonferrous alloys. Joints soldered with Stay Brite solders exhibit considerably higher than necessary elongation for sound, dissimilar metal joints and vibration applications. Both Stay Brite and Stay Brite 8 produce an overall component with greater strength than a brazed component whose base metals are weakened by annealment from high brazing heat.
  • 14000 psi tensile strength
  • 10600 psi shear strength
  • Bright silver color
  • 430 deg F solidus and liquids temperature
  • 48% elongation
  • 16.4 electrical conductivity
  • Lead free Harris Stay Brite SB61 Lead free Solder Wire, 1/8", 450 deg F, 1 lb Spool, Silver/Tin,
    ,



    Harris T720-11

Item#:
T720-11
Manufacturer Item:
SB61
Manufacturer:
SOLDERS
Harris 40005 Stay-Clean Liquid Flux 12 oz

Item#:
40005
Manufacturer Item:
SCLF1G
Manufacturer:
SOLDERS
Harris Stay-Clean SCLF16 Clear to Slightly Yellow General Purpose Soldering Flux, 16 oz, Plastic Bottle
  • A general purpose zinc chloride flux for soldering with all soft solders use with tin-lead solder, tin-antimony solder, Stay-Brite solder Harris Stay-Clean SCLF16 Clear to Slightly Yellow General Purpose Soldering Flux, 16 oz, Plastic BottleSid Harvey Item #:T720-51: Replaces Part #:'s : 10921,
    ,


Item#:
T720-51
Manufacturer Item:
SCLF16
Manufacturer:
SOLDERS
Stay Silv black paste flux is a homogenous brazing flux formulated to provide smooth flux application, even coverage and excellent protection during brazing. The addition of boron extends the active life of the flux which enables it to withstand longer heating cycles. This makes it an ideal choice for induction brazing where intense localized heating is a factor, or heavy parts which often require longer heating time.
,
,



Harris SSBF1/2

Item#:
SSBF1
Manufacturer Item:
SSBF1
Manufacturer:
SOLDERS


Item#:
SSBF1/2
Manufacturer Item:
SSBF1/2
Manufacturer:
SOLDERS
Harris T720-55 An all-purpose, low-temperature flux for use in silver brazing. Use with most ferrous and non ferrous metals, not recommended on aluminum, magnesium, and titanium.
  • Flux may be water thinned but care should be taken to avoid excess dilution
  • Flux turns clear, (transparent), close to brazing application temperature
  • Burns eyes and skin can be fatal if swallowed
  • Fukes and gases can be hazardous to your health
  • Heat rays, (infrared radiation) from flame or hot metal can injure eyes
,
,

Item#:
T720-55
Manufacturer Item:
SSWF1/4
Manufacturer:
SOLDERS
Harris T720-54 An all-purpose, low-temperature flux for use in silver brazing. Use with most ferrous and non ferrous metals, not recommended on aluminum, magnesium, and titanium.
  • Flux may be water thinned but care should be taken to avoid excess dilution
  • Flux turns clear, (transparent), close to brazing application temperature
  • Burns eyes and skin can be fatal if swallowed
  • Fukes and gases can be hazardous to your health
  • Heat rays, (infrared radiation) from flame or hot metal can injure eyes Harris Stay-Silv SSWF Flux, 6.5 oz, Brush Cap Bottle,
    ,


Item#:
T720-54
Manufacturer Item:
SSWF7
Manufacturer:
SOLDERS
Bramec Corporation and is a major distributor in the Electrical, Plumbing, Hardware and HVAC/R industry
  • 18861 Steel Nipple Box 1/2" Red Holds 1/2 (close) through 6 nipples,

    ,

  • Item#:
    18861
    Manufacturer Item:
    18861
    Manufacturer:
    SOLDERS
    |◀ 37 - 48 of 49 ▶|
    View: