Brand Name
Cooling BTU
Heating BTU
Voltage
Phase
Refrigerant
SEER
|◀ ◀ 241 - 247 of 247 ▶ ▶|
View:

Air Conditioning Condenser 7-1/2 Ton 90K BTU 230/3 VAC

42
Item#:
CHS091HMA0A00A
Manufacturer Item:
CHS091HMA0A00A
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
 
CHS-ICP_Install
CHS-ICP_Spec

Air Conditioning Condenser 20 Ton 240K BTU 230/3 VAC 3-Stage

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

    International Comfort Products CHS243HTA0A00A

    • Item#:
    CHS243HTA0A00A
    Manufacturer Item:
    CHS243HTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Spec
    CHS181-243_Install

    Air Conditioning Condenser 6 Ton 72K BTU 575/3 VAC 2-Stage

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

    International Comfort Products CHS072SGA0A00A

    • Item#:
    CHS072SGA0A00A
    Manufacturer Item:
    CHS072SGA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Install
    CHS-ICP_Spec

    Air Conditioning Condenser 15 Ton 180K BTU 575/3 VAC 3-Stage

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

    International Comfort Products CHS183STA0A00A

    • Item#:
    CHS183STA0A00A
    Manufacturer Item:
    CHS183STA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Spec
    CHS181-243_Install

    Air Conditioning Condenser 10 Ton 120K BTU 230/3 VAC 2-Stage

  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

    International Comfort Products CHS121HGA0A00A

    • Item#:
    CHS121HGA0A00A
    Manufacturer Item:
    CHS121HGA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    CHS-ICP_Install
    CHS-ICP_Spec

    Air Handler Vert/Horiz 20 Ton 208/230/3 72" L x 59-1/2" W x 34-1/2" H

  • CABINETUnit cabinet should be constructed of galvanized, pre-painted steel.
  • MOTORInherently protected motors are mounted inside of insulated cabinet to reduce motor noise. A choice of motor horsepowers and drive combinations are available to allow you to meet specified CFM at various static pressures up to 2" [.498 kPa] external static pressure.
  • LOW PROFILEAllows for horizontal installation in most standard drop ceiling applications, and the movement of units through most standard doorways for addition or replacement work.
  • THERMAL EXPANSION VALVESStandard all models.
  • FILTERSOne inch [25 mm] throwaway filters are standard, but filter racks are designed to accept either one inch [25 mm] or two inch [51 mm] filters.
  • EVAPORATOR COILTwo circuit, interlaced row split coils are constructed with copper tubes and aluminum fins mechanically bonded to the tubes for maximum heat transfer capabilities. All coil assemblies are leak tested up to 450 PSIG [3100 kPa] internal pressure prior to installation into units.
  • REFRIGERANT CONNECTIONSField piping connections are made through a fixed post between two side access panels on either side of the unit. Allows flexibility to meet most field conditions as well as full accessibility after the installation is complete. Units may be used with two straight cool condens ing units or single circuit manifolded in the field using the copper fittings shipped with each unit. The RHGN Air Handler has not been tested, rated or certified to operate with dual residential remote heat pumps.
  • DRAIN PANThe galvanized steel drain pan is designed to trap condensate in either vertical or horizontal installations. Condensate drain connections are located on both sides of the unit allowing complete flexibility to meet most field conditions.
  • SERVICE ACCESSTwo removable panels on top and each side of the unit are easily removed for access to motors, blowers, sheaves, and filters.
  • HORIZONTAL OR VERTICALAll models are designed for either application and can be installed in either position as supplied from the factory.
  • TESTINGAll units are run tested at the factory prior to shipment. Units are shipped with a holding charge of nitrogen.


    Fujitsu RHGL-240ZK

    • Item#:
    RHGL-240ZK
    Manufacturer Item:
    RHGL-240ZK
    Manufacturer:
    FUJITSU(UNITARY)
     
    RHGL-240ZK_Spec

    Package Roof Top Heat Pump 5 Ton 15 SEER 208/230/1

    Quiet performance (as low as 69 decibels)*
  • Two-stage heating and cooling with multi-speed blower motor for the best temperature control and comfort
  • Blower and compressor work together for our best cooling dehumidification
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • 5-Year No Hassle Replacement Limited Warranty+
  • 10-Year Parts Limited Warranty±
  • Optional- Exceptional dehumidification for enhanced humidity control

    International Comfort Products PHR548000K000K

    • Item#:
    PHR548000K000K
    Manufacturer Item:
    PHR548000K000K
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    PHR5-ICP_Spec
    |◀ ◀ 241 - 247 of 247 ▶ ▶|
    View: