Suntec B2TA-8850 2-Stage Oil Pump for Use with Oil Burner, 10 gph

• (2) bolt flange mount
• Right hand - nozzle port location and rotation
• 2-pipe installations up to 17" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Adjustable manual or automatic high/low firing
• High efficiency burner applications
• Pressure adjustable (100 - 200 psi low fire, 200 - 300 psi high fire)
• No pump cut-off, external shut-off valve required

,
,

Suntec B-8200 High Capacity High Pressure Fuel Oil Pump, 1/4" NPTF x 1/8" NPTF, 16 gph, 3450 RPM

• Two pipe installations up to 17" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Adjustable manual or automatic high/low firing
• High efficiency burner applications
• Pressure adjustable (100 to 200 psi low fire, 200-300 psi high fire)
• For no. 2 fuel oil. for other fuels, consult factory
• Two bolt flange mounting in any position except upside down
• Right nozzle location

,
,

Suntec B-8200 High Capacity High Pressure Fuel Oil Pump, 1/4" NPTF x,
,

Connected Consumer Fuel CCF-906 Aluminum Adapter for Roth 400L, 620L, The Roth Adapter (CCF-906) allows the standard Smart Oil Gauge to be used with Roth Double-Wall tanks. The adapter features an internal gasket that mates with the Smart Oil Gauge to create a seal. The internal guide cone ensures that the ultrasonic signal is directed to the surface of the oil. The outer flange of the adapter mates with the existing #3 gasket and is secured onto the tank with the black cap nut that comes with the Roth tanks. DO NOT use pipe dope or Teflon tape on the Smart Oil Gauge when using the Roth Adapter. Simply hand tighten the Smart Oil Gauge until the gasket is compressed.,

,

connected consumer ccf-906

Beckett F99-10 Short Spin On Oil Filter 10 Mircon,
,

ICM Controls ICM1501 Oil Burner PrimaryControl, 7.4 A at 120 VAC/3.7 amp at 240 VAC Full Load, Intermittent Ignition

• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Enclosed safety switch with external reset butTon
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• Replacement for popular competitive models
• 44.4 amp at 120 VAC/22.2 amp at 240 VAC (contacts - locked rotor)
• Direct replacement for Honeywell R8184G1161/R8184G1294/R8184G4066

Sid Harvey Item #:ICM1501: Replaces Part #:'s : R8184G1161 | R8184G1294 |,
,

ICM Controls ICM1502 Intermittent Oil Primary Control, 120/240 VAC, Domestic

• Intermittent ignition oil primary control with 30 sec safety timing, replacement for Honeywell R8184G Series
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Enclosed safety switch with external reset butTon
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• Replacement for popular competitive models

,
,

ICM Controls ICM1503 Intermittent Oil Primary Control, 120/240 VAC, Domestic

• Intermittent ignition oil primary control with 45 sec safety timing, replacement for Honeywell R8184G Series
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Enclosed safety switch with external reset butTon
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• Replacement for popular competitive models

Sid Harvey Item #:ICM1503: Replaces Part #:'s : R8184G1138,
,

icm controls icm1503

Suntec J4 Fuel Oil Pump, 1/4" NPTF x 1/8" NPTF, 12/44 gph, 1725/3450 RPM, Right Nozzle

• 1-pipe gravity feed installations
• 2 pipe lift installations to 12" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• 6-pressure options, 10 - 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4" NPTF 2 inlets and return port
• Right nozzle location

Sid Harvey Item #:J4PA-B100G: Replaces Part #:'s : 1P052B,
,

Suntec J4PA-C1050G 1-Stage Oil Pump with By-Pass Nozzle Plug for Use with Oil Burner, 2 gph at 35 psi

• Right hand - nozzle port location and rotation

,

Suntec J4PA-E1000G Fuel Oil Pump, 12 gph, 1725/3450 RPM

,
,