Maxitrol RV48-3/4 Gas Appliance Pressure Regulator

3/4" FPT x 3/4" FPT,


Maxitrol RV48-3/4

Maxitrol G1226-74 Gas Appliance Pressure Regulator

1/2' FPT x 1/2" FPT 2 PSI


Maxitrol G1226-74

A vent limiting orifice or device when used with Maxitrol regulators does not release or relieve gas into the environment during normal operation. Vent limiters are designed for use indoors and in spaces where limiting the amount of gas escapement due to diaphragm failure is critical. Vent limiters should not be used outdoors if they are exposed to the environment. 13A15 Vent Protector is available for outdoor use when vent protection is required

Maxitrol G1226-82

RV53 Aluminum Straight-Thru-Flow Gas Pressure Regulator, 3/4", NPT, 0.5 psi, 690 cfh Maxitrols original straight-thru-flow (STF) design regulators are non-lockup type regulators for high capacities at low inlet pressures. The difference between STF design and other type regulators is the conical valve. The cone principal permits gas to flow straight through the regulator without changing directions. Frictional flow resistance is reduced, resulting in greater capacity. An improved flow pattern provides accurate, sensitive regulation at extremely low pressure differentials.Sid Harvey Item #:G1226-26: Replaces Part #:'s : 39903,

Maxitrol G1226-26

Maxitrol G1226-30 Straight-Thru-Flow Gas Pressure Regulator

1" NPT,


Maxitrol G1226-30

Maxitrol G1226-75 Gas Appliance Pressure Regulator

3/4' FPT x 3/4" FPT 2 PSI,


Maxitrol G1226-75

A vent limiting orifice or device when used with Maxitrol regulators does not release or relieve gas into the environment during normal operation. Vent limiters are designed for use indoors and in spaces where limiting the amount of gas escapement due to diaphragm failure is critical. Vent limiters should not be used outdoors if they are exposed to the environment. 13A15 Vent Protector is available for outdoor use when vent protection is required

Maxitrol G1226-81

A vent limiting orifice or device when used with Maxitrol regulators does not release or relieve gas into the environment during normal operation. Vent limiters are designed for use indoors and in spaces where limiting the amount of gas escapement due to diaphragm failure is critical. Vent limiters should not be used outdoors if they are exposed to the environment. 13A15 Vent Protector is available for outdoor use when vent protection is required.

For up to 1/2 psi (14" WC) inlet pressure
• Note - when using the vent limiting device, regulator must be mounted in a horizontal upright position
  

  Maxitrol G1226-80

Maxitrol G1226-32 Straight-Thru-Flow Gas Pressure Regulator

1" NPT 0.5 PSI,


Maxitrol G1226-32

Maxitrol 325-3L Gas Regulator 1/2" 2 PSI,
Maxitrol 325-3L

Maxitrol 325-3L

Maxitrol 325-3L-1/2-12A09 Gas Regulator

1/2"


Maxitrol 325-3L-1/2-12A09

Maxitrol 325-5-1 Gas Appliance Pressure Regulator

1" NPT


Maxitrol 325-5-1