Installation of a spillage safety switch is recommended for LP and natural gas fired systems with draft hoods. This device is installed to detect flue gas spillage caused by a blocked flue system and/or inadequate draft. This device must be installed by a qualified installer in accordance with the manufacturer's installation instructions. Wiring must be in accordance with the National Electrical Code and applicable local codes.

• Efficiently detect flue gas spillage due to a blocked flue, continuous down drafting or inadequate draft condition
• With the safety switch wired in series with the burner circuit, the switch will de-energize the systems burner or burner control once it senses the spillage of hot flue gases
• Gold contact
• Includes (1) 6 feet length of 12/2 jacketed lead wire, (1) 8 feet length of 12 ga jumper wire, (3) adhesive tabs and switch jumper wire and (2) #8 self-drilling sheet metal screws

Sid Harvey Item #:SSK-3: Replaces Part #:'s : x71-204,
,

field controls ssk-3

Field Controls SWGII-5S Power Venter 5" 115 VAC 3k RPM 290k Btu Stainless Steel,
,

Field Controls SWGII-5S

Gas and oil heating appliances generate heat through the combustion of fuel. The heat is transferred through the heat exchanger and distributed to the conditioned space. The products of combustion, however, must be vented safely out of the structure. In a conventional chimney, venting is achieved by the natural lifting action of the hot combustion gas. New, efficient systems absorb more of the heat in the heat exchanger and produce lower temperature vent gas. Lower temperature gas does not rise as quickly or as reliably as in older, less efficient systems. Power venting or sidewall venting is more economical and safer than chimney venting. A power venter uses a motorized blower to vent the products of combustion. A power venter is interlocked with the appliance to ensure that proper draft is achieved before the appliance burner is activated.

• 100% negative pressure in the vent pipe for maximum safety
• Standard Galvanized pipe can be used instead of expensive stainless steel
• No need to seal vent pipe joints, saving time and money
• Significantly longer vent lengths than positive pressure, direct vent systems
• The SWG recommended by major heating appliance
• Thermal protected
• Power vent and backing plate included

Sid Harvey Item #:SWGII-5: Replaces Part #:'s : 39968,
,

Tjernlund 46235000 Stainless Steel Universal Replacement Motor Assembly, 6"

• Field Controls 46235000 Stainless Steel Universal Replacement Motor Assembly, 6",
  ,
  
  
  

  Tjernlund SWGII-6RMK

Field Controls SWG-4HDS Stainless Steel Power Venter, 4", 115 VAC at 60 Hz, 1.7 amp, 138 watt The safest, most efficient power venter available today. Gas and oil heating appliances generate heat through the combustion of fuel. The heat is transferred through the heat exchanger and distributed to the conditioned space. The products of combustion, however, must be vented safely out of the structure. In a conventional chimney, venting is achieved by the natural lifting action of the hot combustion gas. New, efficient systems absorb more of the heat in the heat exchanger and produce lower temperature vent gas. Lower temperature gas does not rise as quickly or as reliably as in older, less efficient systems. Power venting or sidewall venting is more economical and safer than chimney venting. A power venter uses a motorized blower to vent the products of combustion. A power venter is interlocked with the appliance to ensure that proper draft is achieved before the appliance burner is activated.

• 100% negative pressure in the vent pipe for maximum safety
• Standard Galvanized pipe can be used instead of expensive stainless steel
• No need to seal vent pipe joints, saving time and money
• Significantly longer vent lengths than positive pressure, direct vent systems
• The SWG is recommended by major heating appliance manufacturers
• Thermal protected The safest, most efficient power venter available today. Gas and oil heating appliances generate heat through the combustion of fuel. The heat is transferred through the heat exchanger and distributed to the conditioned space. The products of combustion, however, must be vented safely out of the structure. In a conventional chimney, venting is achieved by the natural lifting action of the hot combustion gas. New, efficient systems absorb more of the heat in the heat exchanger and produce lower temperature vent gas. Lower temperature gas does not rise as quickly or as reliably as in older, less efficient systems. Power venting or sidewall venting is more economical and safer than chimney venting. A power venter uses a motorized blower to vent the products of combustion. A power venter is interlocked with the appliance to ensure that proper draft is achieved before the appliance burner is activated.Sid Harvey Item #:SWG-4HDS: Replaces Part #:'s : x89-857,
  ,
  
  
  
  

  Field Controls SWG-4HDS

Field Controls VRV-4 Stainless Steel Vacuum Relief Valve 4",
,

Field Controls UV-Aire In-Duct Air Purifier 24 VAC Minimum Duct Width 16"

Field Controls offers a complete line of UV-Aire products for any home or business, with a variety of duct-mounted models designed for forced-air heating and cooling systems. UV-Aire germicidal lamps continuously attack airborne mold, bacteria, and viruses as they circulate through your duct work. As part of the Healthy Home System, the in-duct UV-Aire works with the Healthy Home System Control to ensure PURE air in the home all year round...even when not heating or cooling.

• A dual lamp model provides increased potency, useful for larger applications
• Patented angle bracket - angle allows longer lamps to fit into smaller ductwork, maximizing effectiveness, ensures the entire cross section of the duct is irradiated, swivel arm allows for easy lamp replacement
• Duct board mounting kit - makes mounting to duct board simple, designed to increase stability on the duct board
• 2 years life efficiency
• Lamp intensity at 1 m - 62 watt/sq-cm
• Compact design
• Built-In safety switch
• E-Z lamp replacement

Sid Harvey Item #:UV-16/120: Replaces Part #:'s : L87-282,
,

Field Controls offers a complete line of UV-Aire products for any home or business, with a variety of duct-mounted models designed for forced-air heating and cooling systems. UV-Aire germicidal lamps continuously attack airborne mold, bacteria, and viruses as they circulate through your duct work. As part of the Healthy Home System, the in-duct UV-Aire works with the Healthy Home System Control to ensure PURE air in the home all year round even when not heating or cooling.

• A dual lamp model provides increased potency, useful for larger applications
• Patented angle bracket - angle allows longer lamps to fit into smaller ductwork, maximizing effectiveness, ensures the entire cross section of the duct is irradiated, swivel arm allows for easy lamp replacement
• Duct board mounting kit - makes mounting to duct board simple, designed to increase stability on the duct board
• Hinged cover for easy accessibility
• Includes patented angle bracket and duct board mounting kit
• Installs easily and plugs into a standard 120 volt outlet
• 2 years life efficiency
• Lamp intensity at 1 m - 73 watt/sq-cm
• Includes (1) UV-aire power unit, (4) sheet metal mounting screws, (1) angled mounting bracket, (1) flat mounting bracket, (1) duct board mounting bracket, (1) ultraviolet lamp, (1) instruction sheet, (1) wing nut, caution labels, gasket
• 73 micro-watt/sq-cm lamp intensity

Sid Harvey Item #:UV-18: Replaces Part #:'s : L86-554,
,

Field Controls UV-18

Field Controls UV-500C Portable UV Replacement Filter
,
,

Field Controls UV-17FM Flex Mount UV 17" 24 VAC 24 Watt

Field Controls offers a complete line of UV-Aire products for any home or business, with a variety of duct-mounted models designed for forced-air heating and cooling systems. UV-Aire germicidal lamps continuously attack airborne mold, bacteria, and viruses as they circulate through your duct work. As part of the Healthy Home System, the in-duct UV-Aire works with the Healthy Home System Control to ensure PURE air in the home all year round...even when not heating or cooling.

• A dual lamp model provides increased potency, useful for larger applications
• Patented angle bracket - angle allows longer lamps to fit into smaller ductwork, maximizing effectiveness, ensures the entire cross section of the duct is irradiated, swivel arm allows for easy lamp replacement
• Duct board mounting kit - makes mounting to duct board simple, designed to increase stability on the duct board
• Hinged cover for easy accessibility
• Includes patented angle bracket and duct board mounting kit
• Installs easily and plugs into a standard 120 VAC outlet
• 2 years life efficiency
• Lamp intensity at 1 m - 37 watt/sq-cm

Sid Harvey Item #:UV-12: Replaces Part #:'s : L86-553,
,

Field Controls UV-12