Home  > AEROFLEX USA ,INC(x)
|◀ ◀ 25 - 35 of 35 ▶ ▶|
View:

Elbow 90 Degree Long Radius Cover 7/8" x 1" White

Mitred elbows made from Aeroflex Standard EPDM Insulation for use in refrigeration and HVAC applications. Designed to fit tubing bent with the Imperial 370-FH bender or the Reftekk Digi-Bender. Meets 25/50 Fire and Smoke rating and has a working temperature range from -70 °F to 257 °F (-57 °C to 125 °C).

Aeroflex EL5810LRWHITE

Item#:
EL7810LRWHITE
Manufacturer Item:
EL7810LR WHITE
Manufacturer:
AEROFLEX USA ,INC

Pipe Insulation 3/8" x 3/4" x 6 White Saniguard Jacketing

Tube and Sheet Insulation is a highly Flexible, closed-cell and lightweight EPDM-rubber based elastomeric product. Aerocel Tube and Sheet Insulation is designed for insulating warm or cold piping, duct, or equipment. Aerocel EPDM Elastomeric Tube and Sheet Insulation is supplied in 1/4", 3/8", 1/2", 3/4", 1", 1-1/4",1-1/2" 2", 2-1/2" and 3" thicknesses, in popular I.D. sizes up to 8" IPS, and as flat sheets and rolls. Please check for specific size combinations. The tightly formed, closed-cell structure of Aerocel Pipe and Sheet Insulation makes it an efficient insulation, providing superior insulating capacity to many materials, including other elastomeric insulations. Aerocel is manufactured to consistently provide actual values on these key performance criteria for mechanical system insulation

8.00 GPH 8.00-45P-HAGO

Item#:
REF562-AC3810WG
Manufacturer Item:
562-AC3810WG
Manufacturer:
AEROFLEX USA ,INC
 
INSULTUBE_Spec

Cushion Clamp 2-1/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    ZSI Foster UX15834

    • Item#:
    UX21834
    Manufacturer Item:
    UX21834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX21834_Broc

    Cushion Clamp 1-5/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    Warren SL075A

    • Item#:
    UX15834
    Manufacturer Item:
    UX15834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX15834_Broc

    Cushion Clamp 1-3/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    ZSI Foster UX1234

    • Item#:
    UX13834
    Manufacturer Item:
    UX13834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX13834_Broc

    Cushion Clamp 5/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    ZSI Foster UX5810

    • Item#:
    UX5834
    Manufacturer Item:
    UX5834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX5834_Broc

    Cushion Clamp 1/2" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    Webstone Valve 4FK4-WIF

    • Item#:
    UX1234
    Manufacturer Item:
    UX1234-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX1234_Broc

    Cushion Clamp 1-1/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    ZSI Foster UX11834

    • Item#:
    UX11834
    Manufacturer Item:
    UX11834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX11834_Broc

    Cushion Clamp 7/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    ZSI Foster UX25810

    • Item#:
    UX7810
    Manufacturer Item:
    UX7810-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX7810_Broc

    Cushion Clamp 1-3/8" x 1" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    Streamline Plumbing Press PR2X34FTGRED

    • Item#:
    UX13810
    Manufacturer Item:
    UX13810-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX13810_Broc

    Cushion Clamp 7/8" x 3/4" Wall Galvanized Steel-Rubber Lining Polyurethane Foam

  • Cush-A-Therm Clamp is a perfect crush-resistant airtight seal for chilled refrigeration or mechanical pipe lines that require continuous insulation.
  • The rigid foam construction has an insulating tape inner lining which supports tube and absorbs vibration of operating pipe lines.
  • The outer cover consists of a special rubber coating which seals the cushion after installation in order to prevent condensation.
  • It's strong closed-cell structure is ideal for liquid cooling lines to prevent condensation, save energy, and maintain the vapor barrie.
  • Temperature range: -70°F to +250°F (-56.7°C to +121°C)
  • Flammability is Self-Extinguishing as tested under ASTM D 635
  • Maintains thermal barrier protection
  • Tested in Conformance with ASTM E84 (UL 723, NFPA 255)
    having results of 0 FSI (Flame Spread Index) and 50 SDI (Smoke Developed Index)
  • Prevents condensation
  • Properly supports pipe and tube
  • Absorbs vibration
  • Polyurethane foam laminated with a rubber lining
  • Cush-A-Therm is designed to meet the ASHRAE recommendations for insulation for mechanical systems which indicate that insulated pipe hangers should provide the following:
  • 1. Complete sealing of pipe against water vapor ingress
  • 2. No energy transfer of cold to supporting clamp to prevent condensation of water and possible growth of mold. If the support encasing the insulation is in contact with the pipe or tube and supported by a metallic clamp, which is not protected by insulation, below ambient temperatures will be transferred to the clamp causing energy transfer and condensation.
  • 3. No interruption of the insulation envelope
  • 4. Limit or avoid compression at support location



    Mueller Copper W12-69

    • Item#:
    UX7834
    Manufacturer Item:
    UX7834-75MM
    Manufacturer:
    AEROFLEX USA ,INC
     
    UX7834_Broc
    |◀ ◀ 25 - 35 of 35 ▶ ▶|
    View: