• Totally enclosed micro switch snap acting switches operate on temperature rise to setpoint
• Visible control point scale and external adjustments screw permit easy setting
• Horizontal or vertical insertion of the sensing element
• Direct/well immersion of the sensing element
• Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications
• Contacts break on temperature rise
• Screw terminals wiring

Honeywell C290-6A

• Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: full load - 7.4 amp at 120 VAC line voltage, 3.7 amp at 240 VAC; locked rotor - 44.4 amp at 120 VAC line voltage, 22.7 amp at 240 VAC
• Electrical circulator rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor Honeywell L8124G1020 High Limit Triple Aquastat Relay, 120 VAC at 60 Hz, SPSTSid Harvey Item #:C317-8: Replaces Part #:'s : C318-8R,
  ,
  
  
  
  

  Honeywell C317-8

• Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor
• Electrical circulator rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor
• Includes 3" insertion well and ground screw

Honeywell C317-2B

• Immersion-type controllers that combine high limit protection with switching relay control of burner and circulator motors
• High limit opens burner circuit only
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• 1-1/2 - 3" depth less well insulation
• Electrical burner rating: at full load: 7.4 amp at 120 VAC, 3.7 amp at 240 VC; at locked rotor: 44.4 amp at 120 VAC, 22.2 amp at 240 VAC; millivolt: 0.25 amp at 1/4 - 12 VDC
• Electrical circulator rating: at full load: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC; at locked rotor: 44.4 amp at 120 VAC, 22.2 amp at 240 VAC Honeywell L8148J1009/U Aquastat Relay, 120 VAC at 60 Hz, SPST, 120 - 240 deg F High Limit, 8 deg F Fixed DifferentialSid Harvey Item #:C312-9: Replaces Part #:'s : L8148E1000,
  ,
  
  
  
  
  

  Honeywell C312-9

• Central appliance wiring point simplifies service
• Oil burner primary control
• Fixed or field adjustable heat fan on delay
• Field adjustable heat fan off delay
• Controls 2-speed circulating fan
• Fixed 45 sec heat fan on delay
• Heat fan off delay - adjustable 60, 90, 120, 150 sec (set at 150 sec)
• Fixed 0 sec cool fan on delay
• Fixed 0 sec cool fan off delay

Honeywell C419-1

• Completes circuit to household lamp on temperature fall, indicating inoperative heating equipment
• Plugs directly into wall outlet
• Lamp plugs into receptacle at bottom of winter watchman device
• Useful when house is unoccupied to notify a neighbour of a temperature drop so heating source fault can be rectified before freeze-up occurs
• Not precision calibrated for use as a thermostat

HONEYWELL C138-1

honeywell c7250a1001

• Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems, including domestic hot water service
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: at full load: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC line voltage; at locked rotor: 44.4 amp at 120 VAC, 22.7 amp at 240 VAC line voltage
• Electrical circulator rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor
• 1-1/2" depth insulation

Honeywell C317-5

honeywell c554a1463

• Totally enclosed micro switch snap acting switches operate on temperature rise to setpoint
• Visible control point scale and external adjustments screw permit easy setting
• Horizontal insertion of the sensing element
• Direct/well immersion of the sensing element
• Remote bulb model may be used to sense air temperature in ducts and in outside air sensing applications
• Contacts make on temperature rise
• Screw terminals wiring

Honeywell C290-1A

• Immersion-type controllers that combine high limit protection with low limit and circulator control in forced hydronic heating systems
• Require 24 VAC thermostat with heat anticipator set at 0.2 amp (plus current draw of gas valve on L8124E)
• Include diaphragm powerhead and micro Switch assembly that respond to temperature changes in boiler water
• Mount directly to boiler
• Provide multi-zone control by using a separate circulator and R845 relay for each zone
• Electrical burner rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.7 amp at 240 VAC locked rotor
• Electrical circulator rating: 7.4 amp at 120 VAC, 3.7 amp at 240 VAC full load; 44.4 amp at 120 VAC, 22.2 amp at 240 VAC locked rotor

Honeywell C317-11

• Electric heat thermostats provide line VAC age control of electric heating systems
• Easy to install, color coded leads
• Rugged, plastic mounting base
• Mount on standard 2 x 4" outlet box or 4 x 4" junction box
• Select models include extra knob decal for recalibration, if necessary

HONEYWELL C182-5