Brand Name
Part Type
Type
Size
Connection Type
Connection Size
With Tap
|◀ ◀ 37 - 48 of 134 ▶ ▶|
View:

Multi-Split Unibody Ball Valve 3/8" Male Flare x Female Flare W/Access Fitting

Streamline Multi-Split Unibody Ball Valve
  • Design Pressure (DP) / Maximum abnormal pressure (MAP): 775 psig, 53 bar
  • Continuous operating temperature (COT): 40°F/300°F, 40°C/149°C
  • Contact factory or visit website for compatibility with CFC, HCFC, HFC and HFO refrigerants and oils
  • Full port construction to match line size ID
  • Internally equalized ball design
  • Ruptureproof encapsulated stem
  • MCM Seal Technology
  • UL/cUL Listed, Conforms to Pressure Equipment Directive 2014/68/EU, CRN 0C1241.9C
  • 3/8" Male Flare x Female Flare

    Mueller Industries A18946

    • Item#:
    A18946
    Manufacturer Item:
    A18946
    Manufacturer:
    BALL VALVES
     
    Mueller-Multi-Split- Ball Valve_Spec

    Packed Angle Valve 1/4" FFL Swivel B Inlet x 1/4" MFL Non-Back seating

    Mueller Streamline Packed Angle Valve Non-Back Seating
  • 1/4" FFL x 1/4" MFL
  • Design Pressure (DP) / Maximum abnormal pressure (MAP): 700 psig, 48 bar
  • Continuous operating temperature (COT): -40°F/300°F, -40°C/149°C
  • Contact factory or visit website for compatibility with CFC, HCFC, HFC and HFO refrigerants and oils
  • UL/cUL Recognized, Conforms to Pressure Equipment Directive 2014/68/EU, CRN 0C1241.9C
  • Forged brass body
  • Corrosion resistant stem suitable for refrigerants and other industrial fluids

    Mueller Industries A17429

    • Item#:
    A17429
    Manufacturer Item:
    A 17429
    Manufacturer:
    MUELLER STREAMLINE CO

    Magnetic Check Valve 1-3/8" OD

    Features:
  • CHECKMASTER® Check Valves
  • Builtin 30 mesh stainless steel screen
  • Internal components installed with DuraForm Technology
  • Mechanically formed solder cup stops for easy installation
  • Flexible for installation in vertical or horizontal position
  • Hermetically formed solid copper body assures zero leak potential

    Mueller Industries A17941

    • Item#:
    A17941
    Manufacturer Item:
    A17941
    Manufacturer:
    MUELLER STREAMLINE CO

    Refrigeration Check Valve 1-3/8"OD 4-Bolt

    Mueller Streamline B34237 Refrigeration Check Valve 1-3/8"OD 4-Bolt


    Mueller Industries B34237

    Item#:
    B34237
    Manufacturer Item:
    B34237
    Manufacturer:
    MUELLER STREAMLINE CO
     
    Mueller-Check-Valves_Spec

    Copper Magnetic Check Valve 1-3/8" OD Built-In 30 Mesh Strainer, Hermetically Sealed, Install In Any position

    Henry Technologies' Magni-Chek Valves are used in discharge lines to prevent flow from the condenser to the compressor during the"off" cycle, or to prevent flow from an operating Compressor to one that is idle. They are also used in liquid lines to prevent reverse flow through the unused expansion device on heat pump systems, or to prevent backup into the low pressure liquid line of a recirculating system during a defrost period. Henry Technologies Magni-Chek Valves are suitable for use with HFC and HCFC refrigerants and their associated oils, as well as other industrial fluids noncorrosive to copper, brass, steel and aluminum.
      Robust design
    • Compact
    • Heat stabilized nylon seat ring for positive shut-off
    • Positive back-seating with valve in open position
    • Raised seat reduces debris induced sealing issues
    • Large diameter diaphragm for greater lift, better flow and longer life
    • Hermetic seal between bonnet, diaphragms and body

      Henry Technologies D28-313

    Item#:
    D28-313
    Manufacturer Item:
    F6313
    Manufacturer:
    HENRY TECHNOLOGIES, INC
     
    Product-Catalodue-Henry-Technologies

    Copper Magnetic Check Valve 2-1/8" OD Built-In 30 Mesh Strainer, Hermetically Sealed, Install In Any position

    Henry Technologies' Magni-Chek Valves are used in discharge lines to prevent flow from the condenser to the compressor during the"off" cycle, or to prevent flow from an operating Compressor to one that is idle. They are also used in liquid lines to prevent reverse flow through the unused expansion device on heat pump systems, or to prevent backup into the low pressure liquid line of a recirculating system during a defrost period. Henry Technologies Magni-Chek Valves are suitable for use with HFC and HCFC refrigerants and their associated oils, as well as other industrial fluids noncorrosive to copper, brass, steel and aluminum.
      Robust design
    • Compact
    • Heat stabilized nylon seat ring for positive shut-off
    • Positive back-seating with valve in open position
    • Raised seat reduces debris induced sealing issues
    • Large diameter diaphragm for greater lift, better flow and longer life
    • Hermetic seal between bonnet, diaphragms and body

      Henry Technologies F6315

    Item#:
    F6315
    Manufacturer Item:
    MS-34
    Manufacturer:
    HENRY TECHNOLOGIES, INC
     
    Product-Catalodue-Henry-Technologies

    Copper Magnetic Check Valve 1-5/8" OD Built-In 30 Mesh Strainer, Hermetically Sealed, Install In Any position

    Henry Technologies' Magni-Chek Valves are used in discharge lines to prevent flow from the condenser to the compressor during the"off" cycle, or to prevent flow from an operating Compressor to one that is idle. They are also used in liquid lines to prevent reverse flow through the unused expansion device on heat pump systems, or to prevent backup into the low pressure liquid line of a recirculating system during a defrost period. Henry Technologies Magni-Chek Valves are suitable for use with HFC and HCFC refrigerants and their associated oils, as well as other industrial fluids noncorrosive to copper, brass, steel and aluminum.
      Robust design
    • Compact
    • Heat stabilized nylon seat ring for positive shut-off
    • Positive back-seating with valve in open position
    • Raised seat reduces debris induced sealing issues
    • Large diameter diaphragm for greater lift, better flow and longer life
    • Hermetic seal between bonnet, diaphragms and body

      Henry Technologies D28-216

    Item#:
    D28-216
    Manufacturer Item:
    F6314
    Manufacturer:
    HENRY TECHNOLOGIES, INC
     
    Product-Catalodue-Henry-Technologies

    Copper Magnetic Check Valve 5/8" OD Built-In 30 Mesh Strainer, Hermetically Sealed, Install In Any position

    Henry Technologies' Magni-Chek Valves are used in discharge lines to prevent flow from the condenser to the compressor during the"off" cycle, or to prevent flow from an operating Compressor to one that is idle. They are also used in liquid lines to prevent reverse flow through the unused expansion device on heat pump systems, or to prevent backup into the low pressure liquid line of a recirculating system during a defrost period. Henry Technologies Magni-Chek Valves are suitable for use with HFC and HCFC refrigerants and their associated oils, as well as other industrial fluids noncorrosive to copper, brass, steel and aluminum.
      Robust design
    • Compact
    • Heat stabilized nylon seat ring for positive shut-off
    • Positive back-seating with valve in open position
    • Raised seat reduces debris induced sealing issues
    • Large diameter diaphragm for greater lift, better flow and longer life
    • Hermetic seal between bonnet, diaphragms and body

      Henry Technologies D28-206

    Item#:
    D28-206
    Manufacturer Item:
    F6309
    Manufacturer:
    HENRY TECHNOLOGIES, INC
     
    Product-Catalodue-Henry-Technologies

    Copper Magnetic Check Valve 7/8" OD Built-In 30 Mesh Strainer, Hermetically Sealed, Install In Any position

    Henry Technologies' Magni-Chek Valves are used in discharge lines to prevent flow from the condenser to the compressor during the"off" cycle, or to prevent flow from an operating Compressor to one that is idle. They are also used in liquid lines to prevent reverse flow through the unused expansion device on heat pump systems, or to prevent backup into the low pressure liquid line of a recirculating system during a defrost period. Henry Technologies Magni-Chek Valves are suitable for use with HFC and HCFC refrigerants and their associated oils, as well as other industrial fluids noncorrosive to copper, brass, steel and aluminum.
      Robust design
    • Compact
    • Heat stabilized nylon seat ring for positive shut-off
    • Positive back-seating with valve in open position
    • Raised seat reduces debris induced sealing issues
    • Large diameter diaphragm for greater lift, better flow and longer life
    • Hermetic seal between bonnet, diaphragms and body

      Henry Technologies D28-210

    Item#:
    D28-210
    Manufacturer Item:
    F6311
    Manufacturer:
    HENRY TECHNOLOGIES, INC
     
    Product-Catalodue-Henry-Technologies

    Copper Magnetic Check Valve 3/8" OD Built-In 30 Mesh Strainer, Hermetically Sealed, Install In Any position

    Henry Technologies' Magni-Chek Valves are used in discharge lines to prevent flow from the condenser to the compressor during the"off" cycle, or to prevent flow from an operating Compressor to one that is idle. They are also used in liquid lines to prevent reverse flow through the unused expansion device on heat pump systems, or to prevent backup into the low pressure liquid line of a recirculating system during a defrost period. Henry Technologies Magni-Chek Valves are suitable for use with HFC and HCFC refrigerants and their associated oils, as well as other industrial fluids noncorrosive to copper, brass, steel and aluminum.
      Robust design
    • Compact
    • Heat stabilized nylon seat ring for positive shut-off
    • Positive back-seating with valve in open position
    • Raised seat reduces debris induced sealing issues
    • Large diameter diaphragm for greater lift, better flow and longer life
    • Hermetic seal between bonnet, diaphragms and body

      Henry Technologies D28-202

    Item#:
    D28-202
    Manufacturer Item:
    F6307
    Manufacturer:
    HENRY TECHNOLOGIES, INC
     
    Product-Catalodue-Henry-Technologies

    Packed Angle Valve 1/4" Flare x 1/4" OD Brass Non-Back seating

    Mueller Industries Forged Brass Packed Line Angle Valve.
  • 1/4", Solder x Flare
  • Corrosion resistant stem suitable for refrigerants and other industrial fluids
  • Non-back seating
  • Steel seal cap

    Mueller Industries A-17502

    • Item#:
    A-17502
    Manufacturer Item:
    A 17502
    Manufacturer:
    COPPER FITTINGS
     
    A-17502_Spec

    Full Port Ball Valve with Access Port 1-3/8" OD CO2,


    Mueller Industries AC17866XHP

    Item#:
    AC17866XHP
    Manufacturer Item:
    AC17866XHP
    Manufacturer:
    MUELLER STREAMLINE CO
    |◀ ◀ 37 - 48 of 134 ▶ ▶|
    View: