Mueller Industries A 14848 Forged Brass Straight Packless Diaphragm Valve, Lifecycle testing has shown that Streamline's Packless diaphragm valves perform up to 5-times greater than current industry standards. Valve bodies are forged brass with full-size openings for maximum flow and minimum pressure drop and feature integral mounting brackets for ease of installation. Oversized diaphragms produce a perfect combination of long wear and precise sealing. Counter seat design ensures no moisture intrusion.

• 1/4" OD
  ,
  ,
  
  

Mueller Streamline A16472 Packed Angle Valve 1/4" MPT X 1/4 M FLARE

Sanhua Mini-Split Ball Valve

• Saves time and easier on you and your customer when service is needed
  
  • Faster to bring system back to peak performance when there is less guessing about the refrigerant charge
    
    • Isolate single and multiple indoor units
      
      • Male flare x female flare swivel designed to match the connections on line sets and evaporators
        
        

Sanhua Mini-Split Ball Valve

• Saves time and easier on you and your customer when service is needed
  
  • Faster to bring system back to peak performance when there is less guessing about the refrigerant charge
    
    • Isolate single and multiple indoor units
      
      • Male flare x female flare swivel designed to match the connections on line sets and evaporators
        
        

Sanhua Mini-Split Ball Valve

• Saves time and easier on you and your customer when service is needed
  
  • Faster to bring system back to peak performance when there is less guessing about the refrigerant charge
    
    • Isolate single and multiple indoor units
      
      • Male flare x female flare swivel designed to match the connections on line sets and evaporators
        
        

Mueller Streamline B34235 Refrigeration Check Valve 7/8"OD

Mueller Streamline B34236 Refrigeration Check Valve 1-1/8"OD

Mueller Streamline B34239 Refrigeration Check Valve 2-1/8" 4-Bolt

Mueller Industries B34239

Henry Technologies' Magni-Chek Valves are used in discharge lines to prevent flow from the condenser to the compressor during the"off" cycle, or to prevent flow from an operating Compressor to one that is idle. They are also used in liquid lines to prevent reverse flow through the unused expansion device on heat pump systems, or to prevent backup into the low pressure liquid line of a recirculating system during a defrost period. Henry Technologies Magni-Chek Valves are suitable for use with HFC and HCFC refrigerants and their associated oils, as well as other industrial fluids noncorrosive to copper, brass, steel and aluminum.

• Robust design
• Compact
• 1-1/8" OD
• Heat stabilized nylon seat ring for positive shut-off
• Positive back-seating with valve in open position
• Raised seat reduces debris induced sealing issues
• Large diameter diaphragm for greater lift, better flow and longer life
• Hermetic seal between bonnet, diaphragms and body

,
,

Superior offers the most complete range of refrigeration relief valves in the industry with both low and high pressure ratings. All valves have been designed, constructed and rated in accordance with ANSI/ASHRAE 15 - 1994 standard safety code for mechanical refrigeration. Each valve is stamped UV/N. to indicate National Board certifications as to capacities. These pressure-relief valves are all Teflon seated, permitting their use in applications of either high or low temperatures where the conventional rubber seated valves are often completely unsatisfactory.

• Stainless steel spring material construction
• Initial leak set pressure plus/minus 3%
• Reset at 80% of set pressure
• 3/8" NPT x SAE 425 PSI,
  ,
  
  

Packed line valves are designed for a multitude of uses in refrigeration systems. When installed properly, these handy, forged brass, packed angle valves provide easy accessibility, and serviceability to the refrigeration system. All packed angle valves are provided with a brass seal cap.

• Seal cap construction is brass with copper gasket or nylon gasket
• Steel stem with copper nickel plating
• 3/8" NPT x 3/8" Flare

Henry Technologies' Magni-Chek Valves are used in discharge lines to prevent flow from the condenser to the compressor during the"off" cycle, or to prevent flow from an operating Compressor to one that is idle. They are also used in liquid lines to prevent reverse flow through the unused expansion device on heat pump systems, or to prevent backup into the low pressure liquid line of a recirculating system during a defrost period. Henry Technologies Magni-Chek Valves are suitable for use with HFC and HCFC refrigerants and their associated oils, as well as other industrial fluids noncorrosive to copper, brass, steel and aluminum.

• Robust design
• Compact
• 1/2" OD
• Heat stabilized nylon seat ring for positive shut-off
• Positive back-seating with valve in open position
• Raised seat reduces debris induced sealing issues
• Large diameter diaphragm for greater lift, better flow and longer life
• Hermetic seal between bonnet, diaphragms and body

Henry Technologies D28-204