Sherwood Valve Ball Valve Y579-4313

• 1-3/8" OD,
  ,
  
  

Sherwood Valve 594CAP-KIT Seal Cap Kit for 591, 592, 593 and 594 WA/WAS Ball Valves.

Sherwood Valve 587CAP-KIT Seal Cap Kit for 586 and 587 WA/WAS Ball Valves.

• Includes P587B-67 seal cap nut.
• P587WA-43 Seal cap gasket.
• P586WA-31 Seal cap.
• P587B-20T Teflon Gasket.,
  ,
  
  
  

  Superior 587CAP-KIT

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:591WAS-11ST: Replaces Part #:'s : ABV9A | ABV9 |,

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586WAS-8ST: Replaces Part #:'s : ABV4A | ABV4 |,
,

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:592WAS-13ST: Replaces Part #:'s : ABV11A | ABV11 |,
,

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:594WAS-21ST: Replaces Part #:'s : A 17868,
,

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586WAS-12ST:,
,

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586WAS-6ST: Replaces Part #:'s : ABV3A | ABV3 |
,
,

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• These ball valves employ the latest robotic welding technology
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

,
,

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Includes access fitting on tube extension
• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:587WAS-14ST: Replaces Part #:'s : A 17864
,

A robotically welded body joint. Full-size ports for unrestricted flow. These ball valves employ the latest robotic welding technology. Every continuous welded body joint is 100% factory tested to ensure positively leak-free performance. Dual Teflon ball seals surround a polished brass or carbon steel ball at each end. A secondary seal becomes effective if foreign material scores the primary seal - even in extremely unfavorable conditions such as compressor burnout - a Superior exclusive!. WA/WAS Series Ball Valves are constructed using a forged brass body with copper tube extensions on all sizes. Mechanical internal forged stops ensure positive open or closed positions - another Superior exclusive. Full open to full close with 1/4 turn. All sizes incorporate a dual stem seal design utilizing Teflon packing compressed by an internal packing nut forming the primary seal. The unique seal cap design permits valve operation without removal of the seal cap and uses Teflon gaskets to provide a secondary seal - a third Superior exclusive! There are no synthetic O-rings. Ball internal relief port design ensures shut-off in either direction of flow - even during evacuation of the system. Full flow ports in all sizes 3/8" through 3-1/8 Inch. These ball valves are non-directional flow valves and may be installed in any position.

• Polished brass or carbon steel ball resists corrosion
• Seal cap design allows operation without removal of cap
• PTFE ball seals and gaskets ensure tight leak-free valve
• These ball valves employ the latest robotic welding technology
• Full-size ports for unrestricted flow
• Forged seal cap
• Seal cap design permits valve operation without removal of seal cap
• Compatible with these refrigerants R-11, R-22, R-123, R-125, R-134A, R-236FA, R-402B, R-404A, R-407C, R-410A, R-500, R502, R-507

Sid Harvey Item #:586W-8ST: Replaces Part #:'s : 900204 | ABV4 | ABV4A
,