S2K Commerce - Products Dropdown
ActionsS2K Commerce - Shopping Cart
ActionsS2K Commerce - Order Entry
ActionsBrand Name
Part Type
Inlet Size
Outlet Size
Connection Type
Pressure Range
Capillary Length
Parker commercial pressure regulator (S)PORT/(S)PORTII valves are designed with stainless steel bonnet bolts, adjusting stems, and piston and plug assemblies. The result is a regulator designed to withstand the rigorous application environment a low side regulator must endure. Models are available in combinations of connection sizes, port sizes and features as designated by the model code. Unlike some competitive models of low side regulators that utilize high pressure discharge gas as a pilot source, they are piloted with upstream pressure. This eliminates the requirement for hot gas headers, isolation devices, piping, and the labor associated with the installation of other valves. Flare connections from high pressure pilot lines are also eliminated, minimizing sources for prospective leaks. The valves are an integrated assembly of (4) modules: 1) a body, which contains no moving parts, 2) a capacity cartridge, which contains both piston and modulating plug, and defines the port size and onto which the pilot solenoids providing the"S" (shut-off) or"B" (bypass) features are added as required, 4) the bonnet, containing the range spring and adjustment screw, which is set for the value of pressure which the valve is to maintain. The unique modular design allows the regulator to be soldered into the line without disassembly, yet provides full access for disassembly, cleaning and servicing from the top only. Interchangeable capacity cartridges facilitate flow revisions should an undersized or oversized condition be encountered, while pilot adapters can be changed out to add features or even change functions.
,
,
- Retrofitting for additional evaporator capacity is simple and requires no pipe line revisions
- The piston and plug assembly can handle reduced flow conditions and controlling down to about 15% of the valve's maximum capacity
- 7/8" OD
- Designed entirely with corrosion resistant materials
- New cooler running coil and open frame coil housing
- New dual VAC age 208/240/60 Hz coil
- Conveniently located access fitting
- Pilot operated for close control at desired set-point
- Excellent regulation at light loads
- Interchangeable capacity cartridges
- Low pressure drop
- Few moving parts
- Long-life stainless steel diaphragms (no bellows to fail)
- Pilot electric shut-off
- All service from the top
- Sweat-in-place without disassembly
,
,
Item#:
SPORT-07-07
Manufacturer Item:
103624
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker consistent evaporating temperature is maintained at the valve setting as evaporator loads decrease. When the evaporator load increases, the ORIT valve Opens on a Rise of Inlet pressure above its setting.
- 1-1/8"
- 0-50 PSI,
,
Item#:
ORIT-10-0/50-11/8OD
Manufacturer Item:
901138P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker consistent evaporating temperature is maintained at the valve setting as evaporator loads decrease. When the evaporator load increases, the ORIT valve Opens on a Rise of Inlet pressure above its setting.
- 7/8"
- 30-100 PSI,
,
Item#:
ORIT-6-30/100-11/8OD
Manufacturer Item:
901187P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker consistent evaporating temperature is maintained at the valve setting as evaporator loads decrease. When the evaporator load increases, the ORIT valve Opens on a Rise of Inlet pressure above its setting.
- 1/2"
- 0-50 PSI,
,
Item#:
ORIT-6-0/50-1/2OD
Manufacturer Item:
901093P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker consistent evaporating temperature is maintained at the valve setting as evaporator loads decrease. When the evaporator load increases, the ORIT valve Opens on a Rise of Inlet pressure above its setting.
- 1-1/8"
- 30-100 PSI,
,
Item#:
ORIT-10-30/100-ODF
Manufacturer Item:
901229P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker consistent evaporating temperature is maintained at the valve setting as evaporator loads decrease. When the evaporator load increases, the ORIT valve Opens on a Rise of Inlet pressure above its setting.
- 5/8"
- 0-50 PSI,
,
Item#:
ORIT-6-0/50-5/8OD
Manufacturer Item:
901096P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker consistent evaporating temperature is maintained at the valve setting as evaporator loads decrease. When the evaporator load increases, the ORIT valve Opens on a Rise of Inlet pressure above its setting.
- 5/8"OD
- 30-100 PSI,
,
Item#:
ORIT-6-30/100-5/8OD
Manufacturer Item:
901173P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker consistent evaporating temperature is maintained at the valve setting as evaporator loads decrease. When the evaporator load increases, the ORIT valve Opens on a Rise of Inlet pressure above its setting.
- 7/8"
- 0-50 PSI,
,
Item#:
ORIT-6-0/50-7/8OD
Manufacturer Item:
901103P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker consistent evaporating temperature is maintained at the valve setting as evaporator loads decrease. When the evaporator load increases, the ORIT valve Opens on a Rise of Inlet pressure above its setting.
- 7/8"OD
- 30-100 PSI,
,
Item#:
ORIT-6-30/100-7/8OD
Manufacturer Item:
901180P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker evaporator Pressure Regulating Valves are mechanical regulators which use highside system pressure as a source of operating power. They were developed specifically for systems where accurate control and minimum pressure drop are important requirements.1-1/8" ODUses MKC-1/PKC1 Coils
,
,
,
,
Parker SORIT12
Item#:
SORIT12
Manufacturer Item:
901611P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker evaporator Pressure Regulating Valves are mechanical regulators which use highside system pressure as a source of operating power. They were developed specifically for systems where accurate control and minimum pressure drop are important requirements.1-3/8" ODUses MKC-1/PKC1 Coils,
Item#:
SORIT15
Manufacturer Item:
901618P
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)
Parker evaporator Pressure Regulating Valves are mechanical regulators which use highside system pressure as a source of operating power. They were developed specifically for systems where accurate control and minimum pressure drop are important requirements.1-5/8" ODUses MKC-1/PKC1 Coils,
,
,
Item#:
SORIT20
Manufacturer Item:
SORIT20
Manufacturer:
PARKER HANNIFIN(AFTERMARKET)