External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 22 oz initial oil charge, 20 oz oil recharge
• 8.19" length x 6.38" width x 11.19" height mounting
• 3.3 amp rated load, 25 amp locked rotor, 4.6 amp minimum circuit
• 2-cylinders
• 1.69" bore, 0.94" stroke
• 4.2 cu-"/Rev displacement
  
  

  Copeland D75-209

Capacitor run - capacitor start motor type
• External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 22 oz initial oil charge, 20 oz oil recharge
• 8.19" length x 6.38" width x 11.19" height mounting
• 7.9 amp rated load, 40 amp locked rotor, 11 amp minimum circuit
• 2-cylinders
• 1.69" bore, 0.94" stroke
• 4.2 cu-"/Rev displacement
  
  

  Copeland D75-679

Internal inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 80 oz initial oil charge, 70 oz oil recharge
• 11.63" length x 11" width x 18" height mounting
• 30.3 amp rated load, 164 amp locked rotor, 42.4 amp minimum circuit
• 2-cylinders
• 2.56" bore, 1.81" stroke
• 18.71 cu-"/Rev displacement
  
  

  Copeland D75-905

External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 22 oz initial oil charge, 20 oz oil recharge
• 8.19" length x 6.38" width x 11.19" height mounting
• 5.5 amp rated load, 35.5 amp locked rotor, 7.7 amp minimum circuit
• 2-cylinders
• 1.44" bore, 0.94" stroke
• 3.05 cu-"/Rev displacement
  
  

  Copeland D75-592

Copeland D75-161

General 3-lead single Voltage, 6-lead part winding (575 VAC ), 9-lead dual Voltage
• External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement and valve plate
• Model variation
• 70 oz initial oil charge, 65 oz oil recharge
• 11.63" length x 11" width x 13.72" height mounting
• 13.9 amp rated load, 82 amp locked rotor, 19.4 amp minimum circuit
• 2-cylinders
• 2.19" bore, 1.38" stroke
• 10.34 cu-"/Rev displacement
  
  

  Copeland D75-174

Replacment Parts:
003-0020-04 Discharge Muffler Plate
005-0001-00 Terminla Box Cover
013-0010-00 Suction Strainer Screen E,N,3
020-0054-00 Stator Cover Gasket
020-0122-00 Cylinder Head Gasket
020-0123-00 Valve Plate Gasket
020-0124-00 Bottom Platre Gasket
020-0844-02 Seal
020-1221-00 Hosing Cover Gasket
020-1224-00 Service Valve Gasket
062-0001-00 Terminal Box
064-0012-06 Insulator
510-0061-00 Check Valve
521-0067-01 Terminal Insulator
527-0006-00 Mounting
580-0052-02 Termiinal Board
918-0009-00 Crankcase Haeter 120 VAC 60 Watt Bolt On
921-0017-00 Therminal Fusetite
971-0090-13 Overload
998-0002-04 Sightglass
998-0510-12 Valve Kit 2-Bolt 7/8" Sweat
998-0510-22 Valve kit 2-Bolt 1/2" Flare
998-0661-06 Valve plate Kit
998-0669-28 Gasket Set
998-5100-19 Suction & Discharge Valve kit W/Bolts & Gaskets
Copeland EAVA-021E-TAD-800



Copeland EAVA-021E-TAD-800