Hilmor 1891183 Offset Seamer 3", 18 Gauge

Malco DK6S Steel Double Edge Duct Knife, 6" OAL, Red, Black

• Double edge blades are ideal for blind cuts in flex duct
• Ergonomic cushion grip features (1) serrated cutting edge and comes with a puncture-resistant nylon sheath
• Puncture resistant nylon sheath
• Resharpenable, heavy-duty cutlery grade steel blade

,
,

Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4" (6.35 mm). light-weight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20 ga (1.02 mm) Galvanized steel. A compact model HC1 Hole Cutter is adjustable for making 2 to 12" (51 to 305 mm) diameter holes. The larger HC2 model cuts 2 to 20" (51 to 508 mm) holes. A combination English/Metric diameter gauge is included on the adjustable pivot slide for both models and both models use the same mill-type Cutter Bit and replacement parts.

• Versatile for a variety of metal work
• Long-lasting cutter bit
• Precision fit sealed bearings
• Easy adjusting pivot pin

Sid Harvey Item #:T646-8: Replaces Part #:'s : 13275,
,

Hilmor 1891191 High-Speed Steel Hole Cutter, 2 - 12"

• Cutting holes in sheet metal just got a whole lot easier
• These two tools allow you to bring some power to what was previously a manual job, whether you use the smaller Hole Cutter for 2 - 12" holes or the larger Hole Cutter for 2 - 20" holes
• Round shank

,
,

Malco Gold Standard HC2 High Speed Steel Hole Cutter, 2 - 20" Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4" (6.35 mm). light-weight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20 ga (1.02 mm) Galvanized steel. A compact model HC1 Hole Cutter is adjustable for making 2 to 12" (51 to 305 mm) diameter holes. The larger HC2 model cuts 2 to 20" (51 to 508 mm) holes. A combination English/Metric diameter gauge is included on the adjustable pivot slide for both models and both models use the same mill-type Cutter Bit and replacement parts.

• Versatile for a variety of metal work
• Long-lasting cutter bit
• Precision fit sealed bearings
• Easy adjusting pivot pin Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4" (6.35 mm). light-weight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20 ga (1.02 mm) Galvanized steel. A compact model HC1 Hole Cutter is adjustable for making 2 to 12" (51 to 305 mm) diameter holes. The larger HC2 model cuts 2 to 20" (51 to 508 mm) holes. A combination English/Metric diameter gauge is included on the adjustable pivot slide for both models and both models use the same mill-type Cutter Bit and replacement parts.Sid Harvey Item #:HC2: Replaces Part #:'s : 13282,
  
  ,
  
  
  

  Malco HC2

Malco N2R Sheet Metal Notcher,
,

Hilmor 1891180 Sheet Metal Notcher 1" V Cuts/30 Degrees

Sleek styling, easy blade replacement and larger handles make the Andy Snip more versatile. A sleek head design improves maneuverability. Ideal for making cuts in tight material, shapes such as J-Channel. A full 3 in (76.2 mm) cutting length makes straight shearing with the Malco Andy Snip fast and easy. Blade replacement is easily accomplished in the field.

• Larger handle loops
• Sleek head design improves maneuverability

Sid Harvey Item #:MC12A: Replaces Part #:'s : 27117,
,

Malco Andy Snip M14N Straight Automotive Handled Snip, 0.055" Vinyl, 0.035" Aluminum, 0.023" Copper, 0.018" 26 ga Stainless Steel, 0.028" 24 ga Galvanized Steel, 0.024" 24 ga Mild Steel, 14" OAL

• Sleek styling, easy blade replacement and larger handles make the Andy snip more versatile
• M14NRB replaceable blade
• Larger handle loops
• A full 3-1/4" cutting length makes straight shearing with the Malco Andy snip fast and easy
• Flat ground edges
• Lightweight with the strength of steel
• High carbon inset steel blades with sleek aluminum frames for greater maneuverability
• Andy snips feature multiple handle openings to fit large or small hands and provide superior material flow
• Andy 14" pattern straight shearing, mild curve cuts, and multiple layers of material
• A sleek head design improves maneuverability with carbon steel blades and aluminum frame
• Blade replacement is easily accomplished in the field

Sid Harvey Item #:M14N: Replaces Part #:'s : 13352,

,

Malco M14N

Klein Tools J2103S Steel Bulldog Snip 9-7/16" Straight

Malco M2001 Snip Cut Left,

,

Malco M2001

Cut sheet metal, duct, stainless steel. Oh, and time. Hilmor Aviation Snips feature color-coded handles that make finding the right tool quick and easy. Plus, they have a comfortable grip and durable blades.

• Rugged and durable - high carbon steel blades and a reinforced chrome silicon spring increase life and durability
• Quick identification - color-coded handle inserts and splines make identification simple
• Comfortable grip - over molded handles reduce hand fatigue and won't slip or twist

,
,