Malco 12F Folding Tool, 22 ga Sheet Metal, 12" L

Folding tool seams are formed from two steel halves, permanently joined together
• Handy sight holes assure proper depth alignment
  
  

  Malco T646-3

Malco hand seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site. These seamers are available in 3" (76.2 mm) and 6" (152.4 mm) jaw widths as well as an offset 3" (76.2 mm) size for overhead work. The drop-forged, high-impact jaws feature depth markings graduated in 1/4" (6.4 mm) increments and are complimented by a powerful compound leverage design. Easily bend flanges or completely flatten seams from 1/4 - 1-1/4" (6.4 - 31.8 mm) deep in 24 ga (0.71 mm) Galvanized or (0.61 mm) mild steel.

Malco's hand seamers, with forged steel jaws, also feature ergonomic RedLine Handle technology
• An engineered handle opening compliments the natural power stroke of any user's hand maximizes the powerful 7:1 mechanical advantage of compound-leverage head to handle linkage
• Comfortable handle grip contours, a non-slip grip insert, spring handle actuation and a thumb-operated handle latch ensure a natural fit and feel for comfortable one hand operation anywhere on the job
• Bend, fold, flatten, straighten sheet metal on the job
  
  

  Malco T646-1

Built-in wire cutter lets you finish the job you started with just one tool! double edged blade cleanly pierces through outer skin and insulation. Cuts from either direction around entire circumference of duct. Fine honed blade is long lasting stainless steel. Wire cutter cuts hardened wire rib coil. Compound leverage, for easy wire cutting. comfortable, non-slip vinyl gripped handles.

Built-in wire cutter
• Double edged blade
• Cuts from either direction
• Fine honed blade
• 10.4 to 1 - 11.9 to 1 wire cutter variable leverage ratio (high/low) throughout stroke
  
  

  Malco T671-2

Distinctive gold Bits, Bearings and Pivot Pin signify the longest lasting, fastest cutting, easiest adjusting solution for cutting holes in sheet metal. Malco Hole Cutters quickly install into the chuck of any corded or cordless drill as small as 1/4" (6.35 mm). light-weight aluminum frames make these accessories extremely portable for a variety of hole cutting applications in sheet metal including 20 ga (1.02 mm) Galvanized steel. A compact model HC1 Hole Cutter is adjustable for making 2 to 12" (51 to 305 mm) diameter holes. The larger HC2 model cuts 2 to 20" (51 to 508 mm) holes. A combination English/Metric diameter gauge is included on the adjustable pivot slide for both models and both models use the same mill-type Cutter Bit and replacement parts.

Versatile for a variety of metal work
• Long-lasting cutter bit
• Precision fit sealed bearings
• Easy adjusting pivot pin
  
  

  Malco T646-8

Malco DS1 Anodized Aluminum Duct Stretcher, 16" Overall Length

• Use the duct stretcher to hold duct in place with 1 hand while slipping drive cleat in place with other hand
• The low profile, straight body is designed to go anywhere, even in the tightest quarters
• Additional spacing holes allow wheels to be adjusted to span greater distances
• Rugged anodized aluminum body features large vinyl cushion grip and handy hang-up hole
  
  

  Malco T646-5

The original Max2000 features euro-styled ergonomic handles. Textured, solid-colored, molded thermoplastic grips and finger stops compliment a narrower handle opening to fit large or small hands. An ambidextrous, thumb-operated handle latch and replaceable compression spring complete this user-friendly design. All Max2000 aviation snips feature superior hardened blade edges for"maximum" cutting life. Riveted, head-to-handle compound linkage multiplies hand leverage applied by user. Linkage will not rattle or loosen ever! and an easily adjustable pivot bolt, with nylon locking nut, holds its adjustment securely for these hard-working aviation snips.

Fast offset cuts in vinyl plastics, layered metal and seams
• Superior cutting life
• Compound linkage multiplies user hand leverage
• Adjustable pivot bolt
• Handles fit large or small hands
• Cuts sharp left angles, straight lines and 5" diameter Circles
• Feature a serrated upper jaw of hardened alloy steel and a forged steel lower jaw to produce a strong, sharply defined cutting edge for superior offset maneuverability and cutting performance
• Extra-long-life compression spring
• Permanent riveted handles will not loosen and latch will not hang up
  
  

  Malco T652-4

Malco 24F Folding Tool, 24" L

• Folding tool seams are formed from two steel halves, permanently joined together
• Handy sight holes assure proper depth alignment
  
  

  Malco T646-3B

Malco 18F Folding Tool, 22 ga Sheet Metal, 18" L

Folding tool seams are formed from two steel halves, permanently joined together
• Handy sight holes assure proper depth alignment
  
  

  Malco 18F

Hilmor 1891146 Folding Tool, 18 ga CRS, 12" L x 3-1/4" W x 1/5" H

Equipped with sight holes for proper depth alignment
• Built for both 3/8" and 1" folds
  
  

  Hilmor 1891146

Hilmor 1891191 High-Speed Steel Hole Cutter, 2 - 12"

Cutting holes in sheet metal just got a whole lot easier
• These two tools allow you to bring some power to what was previously a manual job, whether you use the smaller Hole Cutter for 2 - 12" holes or the larger Hole Cutter for 2 - 20" holes
• Round shank
  
  

  Hilmor 1891191

Hilmor 1891185 Hand Seamer, 18 ga CRS, 22 ga SS, 9-3/4" L

Stainless steel blades and a reinforced chrome silicon spring increase life and durability
• Over molded handles reduce hand fatigue and won't slip or twist
• 1/4" depth marks on the blades allow for quick bends
  
  

  Hilmor 1891185

Hilmor 1891175 Tinner 12" Tin Snips

Hilmor 1891175