Danfoss offers a complete and flexible range of solenoid valves for use in refrigeration and A/C systems. EVR solenoid valves are direct or servo-operated solenoid valves for liquid, suction and hot gas lines. They are suitable for all refrigeration, freezing and air conditioning applications and are compatible with fluorinated refrigerants. Versions for high-pressure refrigerants are available by contacting Danfoss. The valves can be delivered as normally open or closed as well as with or without manual operation.

032F1204

Danfoss offers a complete and flexible range of solenoid valves for use in refrigeration and A/C systems. EVR solenoid valves are direct or servo-operated solenoid valves for liquid, suction and hot gas lines. They are suitable for all refrigeration, freezing and air conditioning applications and are compatible with fluorinated refrigerants. Versions for high-pressure refrigerants are available by contacting Danfoss. The valves can be delivered as normally open or closed as well as with or without manual operation.
,

032F1157

White Rodgers Cooling Controls Solenoid Valve Repair Kit 200RB2/RB3/RB4/RB6 Solenoid Valve

Spring

O-Ring

Plunger

Piston Assembly

Collar Assembly

Piston Ring,

White Rodgers Cooling Controls KS30386

White Rodgers Cooling Controls Cooling Controls Solenoid Valve Repair Kit for 240RA9 Solenoid Valve Kit Includes:

Spring

O-Ring

Plunger

Piston Assembly

Collar Assembly

Piston Ring,

KS30322

Henry Technologies 902613B-3A Stem Extender for Ball Valve

• Includes (2) 5-023-169 gaskets,
  ,
  
  
  
  

  902613B-3A

White Rodgers Cooling Controls Straight Thru Flange Body 1/2" x 5/8" OD TCL,TCLE Expansion Valves,

V8-140

White Rodgers Cooling Controls Straight Thru Flange Body 3/8" x 5/8" SAE TCL,TCLE Expansion Valves
,

V8-134

Air conditioning, heat pump, truck refrigeration and many other applications require intermittent operation of the refrigeration compressor. Especially in remote applications, the suction line may trap or hold quantities of liquid which are suddenly dumped into the compressor as it starts up. This is frequently the cause of broken valves, pisTons, broken or bent connecting rods, blown gaskets and bearing washout. Proper installation of the Refrigeration Research suction accumulator in the suction line, just before the compressor, eliminates damage. If correctly sized, relatively large quantities of liquid refrigerant may return through the suction line and the suction accumulator prevents damage to the compressor. Liquid is temporarily held in the suction accumulator and metered back to the compressor along with any oil, at a controlled rate, through the metering orifice. Therefore, damage to the compressor is prevented and the compressor immediately and quietly goes to work.

,
,

Refrigeration Research 3700-01

Refrigeration Research 3817 Suction Accumulator 1/2" Vertical,
,

3817

Refrigeration Research 3706 Suction Accumulator 1-3/8" Vertical,
,

3706

Refrigeration Research 3703 Suction Accumulator 3/4" Vertical,
,

3703

White Rodgers Cooling Controls Cooling Controls A-AS 3 84 Suction Accumulator 3" x 8"
The A-AS protects the compressor from liquid slugging and is used with CFC, HCFC and HFC refrigerants. It is available for systems through 28 tons nominal capacity.

Designed to operate in a range of +40°F to -40°F evaporator temperature

Fusible plug on larger diameter units

Solid copper connections

Corrosion resistant epoxy powder paint finish

Inlet deflector directs refrigerant flow to prevent internal splashing and aid in the collection of refrigerant oil,

A-AS 3 84