General 3-lead single Voltage, 6-lead part winding (575 VAC ), 9-lead dual Voltage
• External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement and valve plate
• Model variation
• 70 oz initial oil charge, 65 oz oil recharge
• 11.63" length x 11" width x 13.72" height mounting
• 13.9 amp rated load, 82 amp locked rotor, 19.4 amp minimum circuit
• 2-cylinders
• 2.19" bore, 1.38" stroke
• 10.34 cu-"/Rev displacement
  

  Copeland D75-174

Replacment Parts:
003-0020-04 Discharge Muffler Plate
005-0001-00 Terminla Box Cover
013-0010-00 Suction Strainer Screen E,N,3
020-0054-00 Stator Cover Gasket
020-0122-00 Cylinder Head Gasket
020-0123-00 Valve Plate Gasket
020-0124-00 Bottom Platre Gasket
020-0844-02 Seal
020-1221-00 Hosing Cover Gasket
020-1224-00 Service Valve Gasket
062-0001-00 Terminal Box
064-0012-06 Insulator
510-0061-00 Check Valve
521-0067-01 Terminal Insulator
527-0006-00 Mounting
580-0052-02 Termiinal Board
918-0009-00 Crankcase Haeter 120 VAC 60 Watt Bolt On
921-0017-00 Therminal Fusetite
971-0090-13 Overload
998-0002-04 Sightglass
998-0510-12 Valve Kit 2-Bolt 7/8" Sweat
998-0510-22 Valve kit 2-Bolt 1/2" Flare
998-0661-06 Valve plate Kit
998-0669-28 Gasket Set
998-5100-19 Suction & Discharge Valve kit W/Bolts & Gaskets
Copeland EAVA-021E-TAD-800


Copeland EAVA-021E-TAD-800

Internal inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 80 oz initial oil charge, 70 oz oil recharge
• 11.63" length x 11" width x 18" height mounting
• 19.6 amp rated load, 115 amp locked rotor, 27.5 amp minimum circuit
• 2-cylinders
• 2.5" bore, 1.81" stroke
• 17.8 cu-"/Rev displacement
  

  Copeland D75-875

Capacitor run - capacitor start motor type
• External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 22 oz initial oil charge, 20 oz oil recharge
• 8.19" length x 6.38" width x 11.19" height mounting
• 9 amp rated load, 55 amp locked rotor, 12.6 amp minimum circuit
• 2-cylinders
• 1.88" bore, 1.16" stroke
• 6.38 cu-"/Rev displacement
  

  Copeland D75-792

Copeland D76-410

External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 22 oz initial oil charge, 20 oz oil recharge
• 8.19" length x 6.38" width x 11.19" height mounting
• 6.5 amp rated load, 50 amp locked rotor, 9.1 amp minimum circuit
• 2-cylinders
• 1.69" bore, 0.94" stroke
• 4.2 cu-"/Rev displacement
  

  Copeland D75-671

1/5 HP 740 BTU 115 VAC 1 PH R134A

513634015 Overload


Embraco EMIS70HHR1

External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 22 oz initial oil charge, 20 oz oil recharge
• 8.19" length x 6.38" width x 11.19" height mounting
• 4.5 amp rated load, 27 amp locked rotor, 6.3 amp minimum circuit
• 2-cylinders
• 1.38" bore, 0.94" stroke
• 2.79 cu-"/Rev displacement
  

  Copeland D75-721

General 3-lead single Voltage, 6-lead part winding (575 VAC ), 9-lead dual Voltage
• Internal inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement and valve plate
• Model variation
• 115 oz initial oil charge, 105 oz oil recharge
• 15" length x 12" width x 18.63" height mounting
• 28.5 amp rated load, 144 amp locked rotor, 39.9 amp minimum circuit
• 3-cylinders
• 2.44" bore, 2-1/2" stroke
• 35.01 cu-"/Rev displacement
  

  Copeland D76-515

General 3-lead single Voltage, 6-lead part winding (575 VAC ), 9-lead dual Voltage
• Internal thermal protectors - electronic sensors and control module external use with contactor
• Compressor family series
• Displacement and valve plate
• Model variation
• 135 oz initial oil charge, 125 oz oil recharge
• 15" length x 12" width x 19.16" height mounting
• 88.6 amp rated load, 428 amp locked rotor, 124 amp minimum circuit
• 4-cylinders
• 2.69" bore, 2.19" stroke
• 49.67 cu-"/Rev displacement
  

  Copeland D75-177

External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 22 oz initial oil charge, 20 oz oil recharge
• 8.19" length x 6.38" width x 11.19" height mounting
• 2-cylinders
• 2" bore, 0.94" stroke
• 3.6 cu-"/Rev displacement
• 4.6 amp rated load, 27 amp locked rotor, 6.4 amp minimum circuit
  

  Copeland D75-626

External inherent protection - 1-protector (line break) use with contactor
• Compressor family series
• Displacement
• Model variation
• 60 oz initial oil charge, 55 oz oil recharge
• 10.06" length x 10.5" width x 13.94" height mounting
• 12.4 amp rated load, 82 amp locked rotor, 17.4 amp minimum circuit
• 2-cylinders
• 1.88" bore, 1.38" stroke
• 7.59 cu-"/Rev displacement
• 800 indicates a standard replacement compressor and component parts and model number - 240 VAC control
  

  Copeland D75-231