International Comfort Products FXM4X2400AL Copper Tube Multi-Position Slope Fan Coil with TXV Metering, 2-1/2 Ton, 30K BTU 208/230 VAC

• TXV metering device factory installed
• High efficiency, 3-speed, Genteq X-13 electronically commutated motor (ECM)
• Copper tube/aluminum fin coil
• Sweat connections
• Primary and secondary drain fittings with brass inserts
• 3 amp automotive type fuse in wire harness
• Multiple electrical entry locations
• Time delay relay (TDR) programmed in motor
• HUD approved for manufactured housing
• Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
• 1" thick insulation with R value of 4.2
• No heat (plug) kit factory installed
• Filter factory supplied
• MaXimum fuse size 15 amp
• 5 years parts limited warranty

,

INTERNATIONAL COMFORT PRODUCTS FXM4X3000AL

International Comfort Products FVM4x4800BL Copper Tube Multi-Position Cased A Fan Coil with TXV Metering, 4 Ton, 48K BTU 208/230 VAC

• TXV metering device factory installed
• High efficiency, 2-stage variable speed electronically commutated motor (ECM)
• Copper tube/aluminum fin coil
• Sweat connections
• Primary and secondary drain fittings with brass inserts
• Adjustable cooling and heating on/off delay
• Multiple electrical entry locations
• Time delay relay (TDR)
• HUD approved for manufactured housing
• Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
• 1" thick insulation with R value of 4.2
• Humidifier/humidistat terminals
• Filter factory supplied
• Maximum fuse size 15 amp
• TXV and manifold positioned to the side for easier cleaning
• Zero clearance without heaters
• 10 years limited evaporator coil warranty and 7 years limited parts warranty

,

FVM4X4800BL

Advance Distributers BCRMB6136-S01 Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with Piston Metering and Slant Coil, 48000BTU, 4 Ton, 20 kw, 115 VAC

Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 8" width x 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (B6)
• 0 and 5 kw, hot water standard stripped wire
• 17" width x 17" depth supply duct opening
• 14" width x 17-1/4" depth return duct opening
  

  Advance Distributers BCRMC3148-S03

Fujitsu FB17TSJ07NB Air Handler 1-1/2-2 Ton R410A 208/230 VAC 7 KW 17" Wide

ndustry Standard R-410A Refrigerant
• Models featuring Electric Heat without Indoor CoolingCoil
• Quiet and efficient X-13 (ECM) motor technology
• Only 35" tall and 4-way convertible for all those tight spaces
• Available from factory in upflow and horizontal configurations
• Nominal airflow up to 0.5" eXternal static pressure with reduced airflow up to 1.0" eXternal static pressure
• Factory installed MultiFleX coils
• Sturdy steel construction with 1" [25.4 mm] of foil faced insulation for eXcellent sound and insulating characteristics
• Permanent, easily accessible and washable filter furnished standard
• Circuit breaker (standard on units with more than 11 kW) meets U.L. and cUL requirements for service disconnect
• Factory installed auXiliary electric heat provides eXact heat for indoor comfort over a variety of applications
• Fan settings for selectable, customized cooling airflow over a wide variety of applications
• Cabinet air leakage less than 2% at 1" H2O when tested in accordance with ASHRAE standard 193,
  

  Fujitsu FB17TSJ07NB

Fujitsu FH6024TTSASN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Thermo Pride AH4260AE1 Air Handler Hydro 3-1/2-5 Ton ECM Motor115 VAC

Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  

  Thermo Pride AH4260AE1

Thermo Pride AH2436AE1 Air Handler Hydro 2-3 Ton ECM Motor115 VAC

Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  Thermo Pride AH2436AE1
  

  Thermo Pride AH2436AE1

Advance Distributers BCRMA3124-S01 Pre-Painted Galvanized Heavy Gauge Steel Air Handler with Piston Metering and Slant Coil, 24000 BTU, 2 Ton, 12.5 kw, 208/240 VAC

Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 6" width x 9" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (A3)
• 0 and 5 kw, hot water standard stripped wire
• 13-1/2" width x 17" depth supply duct opening
• 10-1/4" width x 17-1/4" depth return duct opening
  

  Advance Distributers BCRMA3124-S01