Diversitech UC1636-3 Ultralite Equipment Pad

• 36" x 16" x 3"H Fiber Reinforced Cement Pad
  Product
• Extremely lightweight, the UltraLite pad is a concrete pad at the weight of plastic, about 2.5 lbs. per square foot
• Concrete outer skin and EPS foam core provide flexibility and vibration dampening
• Flat bottom design provides excellent resistance to sinking and settling
• The textured surface of the UltraLite prevents equipment sliding and allows water drainage
• Extensive selection of sizes available including wedge-shaped pad
• Drillable for securing unit (¼ x 1-¼" Tapcon recommended), either side or top surface
• Freeze/thaw, UV, chemical & flame-resistant for long-term life outdoors
• Tested per ASTM D2299 with refrigerants, synthetic canine urine, compressor oil or salt solution
• Resistant to heating caused by the compressor and the surface is resistant to heat from incidental torch flame during installation,
  ,
  
  
  
  

  Diversitech UC1636-3

ltraLite is a true concrete equipment pad at the weight of plastic (about 2.5 lbs. per square foot). UltraLite is strengthened by miles of fiber in each square foot of fiber-cement coating. This fiber allows the pad to flex instead of cracking or breaking. The textured surface prevents the condensing unit or portable generator from sliding, and allows water drainage, while the engineered encapsulated polystyrene (EPS) core prevents warping and provides a solid bottom to resist settling. UltraLite is unaffected by soil conditions, ultraviolet (UV) light, temperature extremes, and other weather conditions.
DiversiTech SpeediChannel is an innovative channel system used to cover air conditioning line sets. The two part system has a base and a cover. The base is fastened to a wall or ceiling, then a clever little plastic clip (SpeediClip) snaps into a channel already molded into the base. Then, using standard cable ties, the line set, cables, control wires, and/or condensate drain line are fastened in place. The cover then snaps simply on top of the base. Manufactured from rigid PVC, the SpeediChannel system is a natural color that is a very close match to the typical mini-split condensing unit case. However, the Speedi-Channel system can be painted as desired to match any wall color. The PVC used in the SpeediChannel system is resistant to UV light, and is UL rated.

Diversitech U5053-3

Diversitech U3353-3 Ultralite Equipment Pad 33" x 53" x 3 " H Fiber Reinforced Cement Pad
,

Diversitech QSWI1000

The Diversitech, Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultra violet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.

Diversitech X2424311

The Diversitech, Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultra violet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.

Diversitech X2436211

The Diversitech, Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultra violet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.

Diversitech X2424211

The Diversitech, Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultra violet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.

Diversitech X3232211

The Diversitech, Hef-T-Pad is an injection molded equipment pad created from high impact polypropylene with UV inhibitors making it easy to handle, yet durable and strong. It does not require any additional equipment for moving and handling. It is resistant to impact, ultra violet degradation and weathering and will not crack, flake, or warp. The Hef-T-Pad is virtually impervious to climatic variations. It is drillable to permit installation of refrigerant and electrical lines under and through the pad and to allow equipment to be easily secured to the pad.

Diversitech X3030211

Diversitech CladLite equipment pads provide the strength and durability customers demand in an easy to install pad. CladLite pads are to up 80% lighter than solid concrete but still provide rock solidsupport for equipment. Once its set, so are you. CladLite pads stay in place and can withstand anything mother nature can throw at them. These pads provide superior resistance to sun, moisture, and freeze-thaw conditions. And the vibration dampening EPS foam core is unaffected by water, soil, fungus or bacteria. The 3" thick CladLite pad is the choice for equipment pads when required by the local building code.

• 80% lighter than solid concrete
• Continuous steel reinforcement
• Full foam bottom resists settling and vibration
• Impervious to weather
• 24" x 24" x 3" ,
  ,
  
  
  
  

  Diversitech 24X24X3

Diversitech CladLite equipment pads provide the strength and durability customers demand in an easy to install pad. CladLite pads are to up 80% lighter than solid concrete but still provide rock solidsupport for equipment. Once its set, so are you. CladLite pads stay in place and can withstand anything mother nature can throw at them. These pads provide superior resistance to sun, moisture, and freeze-thaw conditions. And the vibration dampening EPS foam core is unaffected by water, soil, fungus or bacteria. The 3" thick CladLite pad is the choice for equipment pads when required by the local building code.

• 80% lighter than solid concrete
• Continuous steel reinforcement
• Full foam bottom resists settling and vibration
• Impervious to weather
• 24" x 30" x 3"

,

Diversitech 24X36X3

Diversitech CladLite equipment pads provide the strength and durability customers demand in an easy to install pad. CladLite pads are to up 80% lighter than solid concrete but still provide rock solidsupport for equipment. Once its set, so are you. CladLite pads stay in place and can withstand anything mother nature can throw at them. These pads provide superior resistance to sun, moisture, and freeze-thaw conditions. And the vibration dampening EPS foam core is unaffected by water, soil, fungus or bacteria. The 3" thick CladLite pad is the choice for equipment pads when required by the local building code.

• 80% lighter than solid concrete
• Continuous steel reinforcement
• Full foam bottom resists settling and vibration
• Impervious to weather
• 30" x 30" x 3"

,
,

Diversitech 2436-3

Diversitech CladLite equipment pads provide the strength and durability customers demand in an easy to install pad. CladLite pads are to up 80% lighter than solid concrete but still provide rock solidsupport for equipment. Once its set, so are you. CladLite pads stay in place and can withstand anything mother nature can throw at them. These pads provide superior resistance to sun, moisture, and freeze-thaw conditions. And the vibration dampening EPS foam core is unaffected by water, soil, fungus or bacteria. The 3" thick CladLite pad is the choice for equipment pads when required by the local building code.

• 80% lighter than solid concrete
• Continuous steel reinforcement
• Full foam bottom resists settling and vibration
• Impervious to weather
• 32" x 32" x 3"

,
,

Diversitech 32X32X3