Diversitech EP3030-2 Enviropad A/C Condenser Pad

• 30" x 30" x 2"
• The EcoPad is the choice for plastic pads, unless a thicker pad (3) is required by the local building code,
  
  
  
  

  Diversitech EP3030-2

Diversitech EP2424-2 Enviropad A/C Condenser Pad

• 24" x 24" x 2"
• The EcoPad is the choice for plastic pads, unless a thicker pad (3) is required by the local building code,
  ,
  
  
  
  

  Diversitech EP2424-2

Diversitech EP3030-3 Enviropad A/C Condenser Pad

• 30" x 30" x 3"
• The EcoPad is the choice for plastic pads, unless a thicker pad (3) is required by the local building code,
  ,
  
  
  
  

  Diversitech EP3030-3

Diversitech EP3030-3 Enviropad A/C Condenser Pad

• 38" x 42" x 3"
• The EcoPad is the choice for plastic pads, unless a thicker pad (3) is required by the local building code,
  ,
  
  
  
  

  Diversitech EP3842-2

Diversitech HP3232-8 Heat Pump Riser Pad 32" L x 32" W x 8" H for Use With Heat Pump Equipment
Provides an effective base for heat pump equipment installed in snowy climates. Rather than a combination of a typical 2" (or 3") equipment pad and 6in. Heat pump risers, the Heat Pump Pad provides a full 8" of elevation in a simple square footprint. The star pattern of the integral risers allows for installation of equipment with different size footprints up to 36 x 36". Also included are eight anti-vibration pads uniquely designed to fit into the guide slots on the top of the integral risers. The base is sloped outward to allow for easy drainage of condensate or defrost cycle condensate when the outdoor coil is operating in heat pump mode. Nestable for efficient shipping, transportation, and warehousing. Injection molded from concrete gray, recycled polypropylene material, the Heat Pump Pad is environmentally friendly and designed to last longer than the equipment it supports. US Patent Number 7,891,635, and other patent(s) pending.

,
,

Diversitech HPR-3 1-Piece Heat Pump Riser
DiversiTech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in 1 or 2 piece risers. Four risers can handle up to 2,000 lb uniform load.,
,

Diversitech HP3636-8 Heat Pump Riser Pad 36" L x 36" W x 8" H for Use With Heat Pump Equipment
Provides an effective base for heat pump equipment installed in snowy climates. Rather than a combination of a typical 2" (or 3") equipment pad and 6in. Heat pump risers, the Heat Pump Pad provides a full 8" of elevation in a simple square footprint. The star pattern of the integral risers allows for installation of equipment with different size footprints up to 36 x 36". Also included are eight anti-vibration pads uniquely designed to fit into the guide slots on the top of the integral risers. The base is sloped outward to allow for easy drainage of condensate or defrost cycle condensate when the outdoor coil is operating in heat pump mode. Nestable for efficient shipping, transportation, and warehousing. Injection molded from concrete gray, recycled polypropylene material, the Heat Pump Pad is environmentally friendly and designed to last longer than the equipment it supports. US Patent Number 7,891,635, and other patent(s) pending.

,
,

Diversitech HPR-6 1-Piece Heat Pump Riser
DiversiTech's Heat Pump Riser provides the desired elevation for condensers, heat pumps, and air handlers. The one-piece, heavy-duty plastic unit is manufactured in three heights. Butyl mastic on the top and bottom guarantees no slipping and reduced vibration and noise. Available in 1 or 2 piece risers. Four risers can handle up to 2,000 lb uniform load.,

Diversitech HPR-3-2PG Heat Pump Riser 2 Piece 3" Black

Diversitech HPR-3-2PG

UltraLite is a concrete shelled pad with the weight of plastic, strengthened by a fiber-cement coating, flexes instead of cracking or breaking. The textured surface prevents unit slide and allows water drainage, while the engineered core prevents warping and provides a solid bottom to resist settling. Unaffected by soil conditions, UV, temperature extremes, and other weather conditions.

UltraLite is a concrete shelled pad with the weight of plastic, strengthened by a fiber-cement coating, flexes instead of cracking or breaking. The textured surface prevents unit slide and allows water drainage, while the engineered core prevents warping and provides a solid bottom to resist settling. Unaffected by soil conditions, UV, temperature extremes, and other weather conditions.

Diversitech UC2448-3 Ultralite Equipment Pad 48" x 24" x 3" H Fiber Reinforced Cement Pad