S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
RectorSeal EZT-113B Economy Trap Kit with Brush
- 3/4" x 8-1/2",
,
RectorSeal EZ Trap EZT-225 Inline Universal Primary/SecondarySid Harvey Item #:EZT-225: Replaces Part #:'s : B13-549,
,
,
Genesis Cable E304-24A Solid Copper Thermostat Wire, 18/10 AWG, 250'
- Solid Copper
- Insulation Polypropylene (0.006" nom.)
- Lay Length 4" nom.
- Shielding N/A
- Rip Cord Yes (except Speed Bag put ups)
- Country of Origin USA
- Features:
- Full range of thermostat and electronic low voltage wire
- Polypropylene insulation provides exceptional dielectric and strips easily and cleanly,saving time
- Available for General Purpose (CL2) or Plenum(CL2P) Applications
- Ripcord for quick jacket removal
- Room and zone markings printed right on jacket
- Packaging options: Spools, SpeedbagsTM and Pull Boxes
- Manufactured in ISO 9001:2000 facility to exacting quality standards
- 100% guaranteed ,
,Genesis Cable E304-24A
RectorSeal EZT-210 SmartTrap Standard Switched Cross Trap with Brush
RectorSeal EZT-210
RectorSeal EZ Trap EZT-150 UltraTrap Waterless Trap Kit, 3/4" or 1" 14" x 12" x 3-1/2",
,
,
Item#:
EZT-150
Manufacturer Item:
EZT-150
Manufacturer:
E Z TRAP INC.
Genesis Cable E304-5A Solid Copper Thermostat Wire, 18/2 AWG, 500'
- Solid Copper
- Insulation Polypropylene (0.006" nom.)
- Lay Length 4" nom.
- Shielding N/A
- Rip Cord Yes (except Speed Bag put ups)
- Country of Origin USA
- Features:
- Full range of thermostat and electronic low voltage wire
- Polypropylene insulation provides exceptional dielectric and strips easily and cleanly,saving time
- Available for General Purpose (CL2) or Plenum(CL2P) Applications
- Ripcord for quick jacket removal
- Room and zone markings printed right on jacket
- Packaging options: Spools, SpeedbagsTM and Pull Boxes
- Manufactured in ISO 9001:2000 facility to exacting quality standards
- 100% guaranteed ,
,Genesis Cable E304-5A
Fujitsu FH6024TTSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections
Fujitsu FH6024TTSJSN
Item#:
FH6024TTSJSN
Manufacturer Item:
FH6024TTSJSN
Manufacturer:
FUJITSU
- Copeland Scroll compressors on all models
- Suction line accumulator factory installed
- Bi- flow filter- drier included for field installation
- Integrated solid state control with Time- Temperature Defrost
- Low pressure switch
- Copper tube/aluminum fin coil
- Easy Access service valves on all models
- External high and low refrigerant service ports
- Only two screws to access control panel
- Factory charged with R410A refrigerant
- Baked- on powder coat finish over Gallonvanized steel
- Post- painted (black) coil fins
- Coated, weather- resistant cabinet screws
- Coated inlet grille with 3/8grille spacing for extra protection
- 5 year compressor limited warranty
- 5 year parts limited warranty (including compressor and coil) - With timely registration, an additional 5 year parts limited warranty (including compressor and coil
Item#:
NXH618GKP
Manufacturer Item:
NXH618GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
RectorSeal Safe-T-Switch 97622 Mini-Split System, 15 - 250 VAC/15 - 100 VDC, Import
RectorSeal SS610E
Item#:
SS610E
Manufacturer Item:
97622
Manufacturer:
RECTORSEAL - HOUSTON
RectorSeal SS2-1 Overflow Condensate Cut-Off Switch,
RectorSeal SS2-1
Item#:
SS2-1
Manufacturer Item:
97637
Manufacturer:
RECTORSEAL - HOUSTON
White Rodgers Cooling Controls Solid Core Liquid Line Drier 3/8" SAE
- Rated for 600 PSI
- R410A Usage
- Full Flow Fittings for Low Pressure Drop
- Protect Refrigeration Systems from Liquid and Solid Contaminants
- Moisture and Acid Removal
- Moisture and Acid Removal
- Protect Refrigeration Systems from Liquid and Solid Contaminants
- Full Flow Fittings for Low Pressure Drop
- R410A Usage