S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Bosch BVA-24WN1-M20 Air Handler
Item#:
BVA-24WN1-M20
Manufacturer Item:
8733952439
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
Item#:
FXM4X4200AL
Manufacturer Item:
FXM4X4200AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Advance Distributers BCRMB6136-S03 Pre-Painted Galvanized Heavy Gauge Steel Air Handler with PisTon Metering and Slant Coil, 36000 BTU, 3 Ton, 20 kw, 120 VAC
,
- Rifled copper tubing, patented lance fin design
- High efficiency 3-speed motors
- Dynamically balanced blowers for quiet, vibration-free operation
- Drain pans are molded of corrosion proof engineering polymer
- Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
- Filter rack with filter - built into every air handler
- Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
- Fan time delay available as kit or factory installed
- Easily converted to counterflow with kit
- All coils are individually pressure tested at 450 psi, then pressurized and sealed
- 8" width x 10" diameter wheel
- Constant speed, 3-speed blower motor
- Right hand refrigerant and drain connection
- Slab number (B6)
- 0 and 5 kw, hot water standard stripped wire
- 17" width x 17" depth supply duct opening
- 14" width x 17-1/4" depth return duct opening
,
Item#:
BCRMB6136-S03
Manufacturer Item:
BCRMB6136-S03
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
Bosch BVA-24WN1-M18 Air Handler
- 3 Ton 15 SEER Multi-Position Factory Installed TXV
- Multi-speed ECM blower motor.
- Factory-installed TXV metering.
- Multi-position Installation - upflow or horizontal right standard;
- field convertible to horizontal left or downflow.
- Multiple electrical entry locations.
- Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
- Dual front panel design for ease of maintenance.
- Blower and coil easy slide out for ease of maintenance.
- Fully-insulated cabinet design.
- Horizontal and vertical condensate drain pans standard.
- Condensate drain pan is polymer with UVC inhibitor.
- Primary and secondary condensate drain fittings.
- Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
- Integrated filter rack with tool-less door access.
- AHRI and ETL Listed.,
,Bosch BVA-36WN1-M15
Item#:
BVA-36WN1-M15
Manufacturer Item:
8-733-955-039
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Advance Distributers BCRMB6136-S01 Pre-Painted Galvanized Heavy Gauge Steel Air Handler with PisTon Metering and Slant Coil, 36000 BTU, 3 Ton, 20 kw, 208/240 VAC
,
- Rifled copper tubing, patented lance fin design
- High efficiency 3-speed motors
- Dynamically balanced blowers for quiet, vibration-free operation
- Drain pans are molded of corrosion proof engineering polymer
- Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
- Filter rack with filter - built into every air handler
- Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
- Fan time delay available as kit or factory installed
- Easily converted to counterflow with kit
- All coils are individually pressure tested at 450 psi, then pressurized and sealed
- 8" width x 10" diameter wheel
- Constant speed, 3-speed blower motor
- Right hand refrigerant and drain connection
- Slab number (B6)
- 0 and 5 kw, hot water standard stripped wire
- 17" width x 17" depth supply duct opening
- 14" width x 17-1/4" depth return duct opening
,
Item#:
BCRMB6136-S01
Manufacturer Item:
BCRMB6136-S01
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
Bosch BVA-36WN1-M20 Air Handler
Item#:
BVA-36WN1-M20
Manufacturer Item:
8733952440
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Advance Distributers BCRMB6136-S01 Pre-Painted Gallonvanized Heavy Gauge Steel Air Handler with PisTon Metering and Slant Coil, 48000BTU, 4 Ton, 20 kw, 115 VAC
,
- Rifled copper tubing, patented lance fin design
- High efficiency 3-speed motors
- Dynamically balanced blowers for quiet, vibration-free operation
- Drain pans are molded of corrosion proof engineering polymer
- Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
- Filter rack with filter - built into every air handler
- Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
- Fan time delay available as kit or factory installed
- Easily converted to counterflow with kit
- All coils are individually pressure tested at 450 psi, then pressurized and sealed
- 8" width x 10" diameter wheel
- Constant speed, 3-speed blower motor
- Right hand refrigerant and drain connection
- Slab number (B6)
- 0 and 5 kw, hot water standard stripped wire
- 17" width x 17" depth supply duct opening
- 14" width x 17-1/4" depth return duct opening
,
Item#:
BCRMC3148-S03
Manufacturer Item:
BCRMC3148-S03
Manufacturer:
ADVANCED DISTRIBUTOR PRODUCTS
Bosch BVA-24WN1-M18 Air Handler
- 4 Ton 15 SEER Multi-Position Factory Installed TXV
- Multi-speed ECM blower motor.
- Factory-installed TXV metering.
- Multi-position Installation - upflow or horizontal right standard;
- field convertible to horizontal left or downflow.
- Multiple electrical entry locations.
- Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
- Dual front panel design for ease of maintenance.
- Blower and coil easy slide out for ease of maintenance.
- Fully-insulated cabinet design.
- Horizontal and vertical condensate drain pans standard.
- Condensate drain pan is polymer with UVC inhibitor.
- Primary and secondary condensate drain fittings.
- Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
- Integrated filter rack with tool-less door access.
- AHRI and ETL Listed.,
,Bosch BVA-48WN1-M15
Item#:
BVA-48WN1-M15
Manufacturer Item:
8-733-955-040
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Bosch BVA-48WN1-M18 Air Handler
- 4 Ton 18 SEER Multi-Position Factory Installed TXV
- Multi-speed ECM blower motor.
- Factory-installed TXV metering.
- Multi-position Installation - upflow or horizontal right standard;
- field convertible to horizontal left or downflow.
- Multiple electrical entry locations.
- Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
- Dual front panel design for ease of maintenance.
- Blower and coil easy slide out for ease of maintenance.
- Fully-insulated cabinet design.
- Horizontal and vertical condensate drain pans standard.
- Condensate drain pan is polymer with UVC inhibitor.
- Primary and secondary condensate drain fittings.
- Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
- Integrated filter rack with tool-less door access.
- AHRI and ETL Listed.,
Item#:
BVA-48WN1-M18
Manufacturer Item:
7739832073
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
standard, horizontal right with minor modification (field convertible to downflow with available accessory kit)
INTERNATIONAL COMFORT PRODUCTS FXM4X4800AL
Item#:
FXM4X4800AL
Manufacturer Item:
FXM4X4800AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Bosch BVA-48WN1-M20 Air Handler
- 4 Ton 20 SEER Multi-Position Factory Installed TXV
- Multi-speed ECM blower motor.
- Factory-installed TXV metering.
- Multi-position Installation - upflow or horizontal right standard;
- field convertible to horizontal left or downflow.
- Multiple electrical entry locations.
- Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
- Dual front panel design for ease of maintenance.
- Blower and coil easy slide out for ease of maintenance.
- Fully-insulated cabinet design.
- Horizontal and vertical condensate drain pans standard.
- Condensate drain pan is polymer with UVC inhibitor.
- Primary and secondary condensate drain fittings.
- Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
- Integrated filter rack with tool-less door access.
- AHRI and ETL Listed.,
,Bosch BVA-48WN1-M20
Item#:
BVA-48WN1-M20
Manufacturer Item:
8733952441
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Bosch BVA-48WN1-M20 Air Handler
- 5 Ton 15 SEER Multi-Position Factory Installed TXV
- Multi-speed ECM blower motor.
- Factory-installed TXV metering.
- Multi-position Installation - upflow or horizontal right standard;
- field convertible to horizontal left or downflow.
- Multiple electrical entry locations.
- Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
- Dual front panel design for ease of maintenance.
- Blower and coil easy slide out for ease of maintenance.
- Fully-insulated cabinet design.
- Horizontal and vertical condensate drain pans standard.
- Condensate drain pan is polymer with UVC inhibitor.
- Primary and secondary condensate drain fittings.
- Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
- Integrated filter rack with tool-less door access.
- AHRI and ETL Listed.,
,Bosch BVA-60WN1-M15
Item#:
BVA-60WN1-M15
Manufacturer Item:
8-733-955-041
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP