• Upflow, Horizontal (right to left)
• Drain pans are manufactured of durable, non-corrosive plastic, and meet ASHRAE standards for IAQ. Pans are"dry" thus holding minimum water.
• Drain pans have primary and secondary drains for either left or right hand connections.
• Cabinet is heavy gauge embossed Gallonvanized steel substrate, with front and top panels pre-painted a durable neutral gray.
• All units are equipped with factory installed time delay relay as standard.
• All units have 1 foil faced insulation.
• All units include a 1" throw away filter.
• All electric heat units are 208/230/1/60 All hydronic heat units are 115/1/60.
• Standard units with 12 KW electric heat or larger have a factory installed circuit breaker (UL Requirement). All units 10 KW and smaller may be ordered with or without the circuit breaker option.
• All units are suitable for"0"" clearance to combustible materials.
• Electric heat units are field convertible to downflow with factory conversion kit.
• Blower assembly slides out for easy maintenance.
• Refrigeration coil connections are swaged and then factory sealed with copper caps to maintain a nitrogen holding charge.
• All hydronic units include a freeze protection switch.
• All hydronic units include a compressor lockout switch.
  
  

• Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  ,
  
  

• Powder coated heavy-gauge steel cabinet for long lasting quality and durability
• Interlocking steel casing for rigid construction, tight joints, quiet operation and reduced heat loss
• GE ECM motor provides infinite blower speeds to increase efficiency and provide consistent airflow for a more comfortable nome
• Bottom return air in upflow position, left or right air return in horizontal position
• Foil-faced insulation for reduced noise and improved efficiency
• Horizontal drain pan built in to facilitate removal of A/C condensate
• Made in the USA,
  ,
  
  

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP eXpansion valve available factory installed, eXpansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 10" width X 10" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number
• 0 and 5 kw, hot water standard stripped wire
• 20-1/2" width X 21" depth supply duct opening
• 17-3/4" width X 22" depth return duct opening

• Multi-Position 1-1/2-2 Ton 115 VAC 3 Speed Motor TxV R22,
  ,
  
  

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 6" width x 9" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (A3)
• 0 and 5 kw, hot water standard stripped wire
• 13-1/2" width x 17" depth supply duct opening
• 10-1/4" width x 17-1/4" depth return duct opening

Bosch BVA-24WN1-M15

• 2 Ton 18 SEER Multi-Position Factory Installed TXV
• Multi-speed ECM blower motor.
• Factory-installed TXV metering.
• Multi-position Installation - upflow or horizontal right standard;
• field convertible to horizontal left or downflow.
• Multiple electrical entry locations.
• Field-installed electric heater kits 5, 7.5, 10, 15, 20KW available as an accessory.
• Dual front panel design for ease of maintenance.
• Blower and coil easy slide out for ease of maintenance.
• Fully-insulated cabinet design.
• Horizontal and vertical condensate drain pans standard.
• Condensate drain pan is polymer with UVC inhibitor.
• Primary and secondary condensate drain fittings.
• Factory-sealed cabinet certified to achieve 2% or less air leakage rate at 1.0" water column.
• Integrated filter rack with tool-less door access.
• AHRI and ETL Listed.,
  ,
  
  

• Rifled copper tubing, patented lance fin design
• High efficiency 3-speed motors
• Dynamically balanced blowers for quiet, vibration-free operation
• Drain pans are molded of corrosion proof engineering polymer
• Florator, non-bleed A/C or HP expansion valve available factory installed, expansion valves also available as a kit for field installation (all screw-on connections)
• Filter rack with filter - built into every air handler
• Electric heat available factory installed or in kit form for field installation, plug in connections simplify installation of kits
• Fan time delay available as kit or factory installed
• Easily converted to counterflow with kit
• All coils are individually pressure tested at 450 psi, then pressurized and sealed
• 6" width x 9" diameter wheel
• Constant speed, 3-speed blower motor
• Right hand refrigerant and drain connection
• Slab number (A3)
• 0 and 5 kw, hot water standard stripped wire
• 13-1/2" width x 17" depth supply duct opening
• 10-1/4" width x 17-1/4" depth return duct opening