|◀ 1 - 12 of 490 ▶|
View:
Fujitsu FO6016CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 4 Ton
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
    ,

    Fujitsu FO6016CSJNA

Item#:
FO6016CSJNA
Manufacturer Item:
FO6016CSJNAA
Manufacturer:
FUJITSU
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
  • Variable speed heat pump with observer communicating control system
  • Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
  • Electronic expansion valve (EXV) for precise heating control
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor, coil temperature sensor
  • Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
  • Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
  • Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
  • High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
  • Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
  • Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
  • High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
  • Coated inlet grille with 3/8 Inch grille spacing for extra protection
  • Corner posts for extra strength and style
  • 10 years limited parts warranty
  • 5 years parts limited warranty
  • Coil guard grille
  • Sales code
  • Smart comfort deluxe 18 with SmartSense technology
Item#:
TVH860GKA
Manufacturer Item:
TVH860GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
  • Variable speed heat pump with observer communicating control system
  • Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
  • Electronic expansion valve (EXV) for precise heating control
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor, coil temperature sensor
  • Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
  • Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
  • Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
  • High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
  • Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
  • Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
  • High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
  • Coated inlet grille with 3/8 Inch grille spacing for extra protection
  • Corner posts for extra strength and style
  • 10 years limited parts warranty
  • 5 years parts limited warranty
  • Coil guard grille
  • Sales code
  • Smart comfort deluxe 18 with SmartSense technology
Item#:
TVH848GKA
Manufacturer Item:
TVH848GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
  • Variable speed heat pump with observer communicating control system
  • Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
  • Electronic expansion valve (EXV) for precise heating control
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor, coil temperature sensor
  • Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
  • Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
  • Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
  • High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
  • Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
  • Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
  • High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
  • Coated inlet grille with 3/8 Inch grille spacing for extra protection
  • Corner posts for extra strength and style
  • 10 years limited parts warranty
  • 5 years parts limited warranty
  • Coil guard grille
  • Sales code
  • Smart comfort deluxe 18 with SmartSense technology
Item#:
TVH837GKA
Manufacturer Item:
TVH837GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
  • Variable speed heat pump with observer communicating control system
  • Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
  • Electronic expansion valve (EXV) for precise heating control
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor, coil temperature sensor
  • Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
  • Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
  • Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
  • High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
  • Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
  • Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
  • High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
  • Coated inlet grille with 3/8 Inch grille spacing for extra protection
  • Corner posts for extra strength and style
  • 10 years limited parts warranty
  • 5 years parts limited warranty
  • Coil guard grille
  • Sales code
  • Smart comfort deluxe 18 with SmartSense technology
Item#:
TVH836GKA
Manufacturer Item:
TVH836GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
  • Variable speed heat pump with observer communicating control system
  • Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
  • Electronic expansion valve (EXV) for precise heating control
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor, coil temperature sensor
  • Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
  • Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
  • Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
  • High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
  • Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
  • Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
  • High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
  • Coated inlet grille with 3/8 Inch grille spacing for extra protection
  • Corner posts for extra strength and style
  • 10 years limited parts warranty
  • 5 years parts limited warranty
  • Coil guard grille
  • Sales code
  • Smart comfort deluxe 18 with SmartSense technology
Item#:
TVH825GKA
Manufacturer Item:
TVH825GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Baked-On Powder Coated Galvanized Steel Variable Speed Mainline Split System Heat Pump, 24000 /hr, 2 ton, 208 - 230 VAC
  • Variable speed heat pump with observer communicating control system
  • Variable speed compressor operates at 5-stages with capacity range as wide as 25 - 100%
  • Electronic expansion valve (EXV) for precise heating control
  • High pressure switch
  • Suction pressure transducer
  • Pressure equalizer valve for easy starting
  • Compressor discharge temperature sensor, coil temperature sensor
  • Copper tube/aluminum fin coil, internal crankcase heater standard, suction line accumulator factory installed
  • Integrated inverter control enables 5-stage operation with complete observer communicating system including observer control - observer wall control with version 5 or newer software required, also capable of 2-stage operation with 2-stage thermostat
  • Self-configuring installation with observer communicating wall control, compact ECM fan motor driven by integrated inverter control, outdoor temperature sensor factory installed
  • High performance compressor sound shield standard, isolation compressor grommets, enhanced dehumidification
  • Text based diagnostics with observer communicating wall control, only 2 control wires required from communicating indoor unit to condenser, external high and low refrigerant service ports
  • Factory charged with R-410A refrigerant, adjustments for min and max staging with observer wall control
  • High gloss, baked-on powder coat finish over galvanized steel, post-painted (black) coil fins
  • Coated inlet grille with 3/8 Inch grille spacing for extra protection
  • Corner posts for extra strength and style
  • 10 years limited parts warranty
  • 5 years parts limited warranty
  • Coil guard grille
  • Sales code
  • Smart comfort deluxe 18 with SmartSense technology



    Tempstar TVH824GKA

Item#:
TVH824GKA
Manufacturer Item:
TVH824GKA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Fujitsu FO4216CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 3-1/2 Ton
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
    ,

    FUJITSU FO4216CSJNA

Item#:
FO4216CSJNA
Manufacturer Item:
FO4216CSJNAA
Manufacturer:
FUJITSU
Fujitsu FO4213CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 13 SEER 208/230/1 R410A 3-1/2 Ton
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,

    ,

    FUJITSU FO4213CSJNA

Item#:
FO4213CSJNA
Manufacturer Item:
FO4213CSJNAA
Manufacturer:
FUJITSU
Fujitsu FO3617CTJCBA A/C Condensing Unit Non-Communicating No Pressure Switch 17 SEER 208/230/1 R410A 3 Ton
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
    ,
Item#:
FO3617CTJCBA
Manufacturer Item:
FO3617CTJCBA
Manufacturer:
FUJITSU(UNITARY)
Fujitsu FO3016CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 16 SEER 208/230/1 R410A 2-1/2 Ton
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,
    ,

    FUJITSU FO3016CSJNA

Item#:
FO3016CSJNA
Manufacturer Item:
FO3016CSJNAA
Manufacturer:
FUJITSU
Fujitsu FO3014CSJNA A/C Condensing Unit Non-Communicating No Pressure Switch 14 SEER 208/230/1 R410A 2-1/2 Ton
  • New composite base pan  dampens sound, captures louver panels, eliminates corrosion and reduces number of fasteners needed.
  • Better coat paint system  for a long lasting professional finish.
  • Scroll compressor  uses 70% fewer moving parts for higher efficiency and increased reliability.
  • Modern cabinet aesthetics  increased curb appeal with visually appealing design.
  • Covered louver panels  provide ultimate coil protection,enhance cabinet strength, and increased cabinet rigidity.
  • Optimized fan orifice  optimizes airflow and reduces unit sound.
  • Rust resistant screws  confirmed through 1500-hour salt spray testing.
  • 3"-4"-5" service valve space  provides a minimum working area of 27-square"es for easier access.
  • 15" wide, industry leading corner service access makes repairs easier and faster.
  • External gauge port access  allows easy connection of low-loss gauge ports.
  • Single-row condenser coil  makes unit lighter and allows thorough coil cleaning to maintain out of the box performance.
  • Fewer cabinet fasteners  allow for faster access to internal components and hassle-free panel removal.
  • Service trays  hold fasteners or caps during service calls.
  • QR code  provides technical information on demand for faster service calls.
  • Fan motor harness with extra long wires allows unit top to be removed without disconnecting fan wire.,

    FO3014CSJNA

    ,

    FO3014CSJNA

Item#:
FO3014CSJNA
Manufacturer Item:
FO3014CSJNAA
Manufacturer:
FUJITSU(MINI-SPLITS)
|◀ 1 - 12 of 490 ▶|
View: