Brand Name
Part Type
Category

All Clearance items are limited to quantity on hand in each location. 

  1. Use the ( NARROW YOUR SEARCH ) option on the left to filter items. 
  2. Click ( DISPLAY COMPANY INVENTORY ) to view quantity on hand of selected item if not available in your primary location. 
|◀ 25 - 36 of 60 ▶|
View:
Fujitsu FH6024TTSJSN 1-Stage Standard Efficiency 95% Non-Communicating Air Handler
The most compact unit design available, all standard heat airhandler models only 421/2 to 57"es [1079 to 1448 mm] high. Attractive pre-painted cabinet exterior. Rugged wall steel cabinet construction, designed for added strength and versatility. 1.0" foil faced insulation mechanically retained in blower compartment for excellent thermal and sound performance. Four leg blower motor mount. Blower housing with controls, motor and blower. Slide out design for service and maintenance convenience. Traditional open wire element design for heat applications. Field convertible for vertical downflow, horizontal left hand or right hand air supply. 3 combustible floor base accessories fit all model sizes when required for downflow installations on combustible floors. Indoor coil design provides low air side pressure drop, high performance and extremely compact size. Expansion valve on indoor coil provides for operation with air conditioning or heat pump using the same coil. Coils are constructed of aluminum fins bonded to internally grooved aluminum tubing. Coils are tested at the factory with an extensive refrigerant leak check.Coils have copper sweat refrigerant connections.Coils utilize chatleff metering device connections. Molded polymer corrosion resistant condensate drain pan is provided on all indoor coils. Supply duct flanges provided as standard on air handler cabinet. Provisions for field electrical, connections available from either side or top of the air handler cabinet. Connection point for high voltage wiring is inside the air handler cabinet. Low voltage connection is made on the outside of the air handler cabinet. Concentric knockouts are provided for power connection to cabinet. Installer may pull desired hole size up to 2"es [51 mm] for 11/2" [38 mm] conduit. Front refrigerant and drain connections

Fujitsu FH6024TTSJSN

Item#:
FH6024TTSJSN
Manufacturer Item:
FH6024TTSJSN
Manufacturer:
FUJITSU
Nortek Global(Reznor) X-200 Duct Furnace Suspended 200K BTU Gravity Vented 120 VAC

Item#:
X-200
Manufacturer Item:
X-200
Manufacturer:
NORTEK GLOBAL(REZNOR)
Item#:
X-300
Manufacturer Item:
X-300
Manufacturer:
NORTEK GLOBAL(REZNOR)
What is a Mini-Split?
  • Halcyon systems eliminate the need for a basement or attic-located evaporator unit and bulky ductwork by using thin copper tubing that pumps refrigerant directly to discreet wall mounted or concealed units inside. Even more remarkable, this same unit works in reverse in winter, absorbing heat from the outside air and moving it indoors to heat your home. The result? Efficient cooling and heating for yearround, whole-house comfort in most climates
  • Available in numerous mix-and-match capacities and configurations, there's a Halcyon mini-split system for even the most difficult to heat and cool areas
  • How Does a Mini-Split Work? Like your refrigerator, heat pumps use electricity to pump refrigerant and transfer heat from one space to another. When we transfer heat from within our home to the outdoors, we call it "air conditioning". Conversely, when we transfer heat from the outdoors to within the home, we call it a "heat-pump".

    Fujitsu AUU42RGLX

  • Item#:
    AUU42RGLX
    Manufacturer Item:
    AUU42RGLX
    Manufacturer:
    FUJITSU


    Item#:
    DLFSHBH12XAK
    Manufacturer Item:
    DLFSHBH12XAK
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS


    Item#:
    DLFSHBH09XAK
    Manufacturer Item:
    DLFSHBH09XAK
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Cost-competitive
  • Available in 115V and 208/230V
  • Built-in basepan heater on heat pump units
  • Auto-restart function
  • Condenser high-temperature protection
  • Refrigerant leakage detection
  • Quiet outdoor operation, as low as 52 dB(A)
  • Anti-corrosive fin coating
  • Piping length 82 ~ 164 ft. (25-50 m.)
  • Cooling operating range 0° ~ 22° F (-17° ~ 50° C)
  • Heating operating range 0° ~ 86° F (-17° ~ 30° C)

  • Item#:
    DLCSRBH12AAK
    Manufacturer Item:
    DLCSRBH12AAK
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Cost-competitive
  • Available in 115V and 208/230V
  • Built-in basepan heater on heat pump units
  • Auto-restart function
  • Condenser high-temperature protection
  • Refrigerant leakage detection
  • Quiet outdoor operation, as low as 52 dB(A)
  • Anti-corrosive fin coating
  • Piping length 82 ~ 164 ft. (25-50 m.)
  • Cooling operating range 0° ~ 22° F (-17° ~ 50° C)
  • Heating operating range 0° ~ 86° F (-17° ~ 30° C)
  • Item#:
    DLCSRBH18AAK
    Manufacturer Item:
    DLCSRBH18AAK
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Cost-competitive
  • Available in 115V and 208/230V
  • Built-in basepan heater on heat pump units
  • Auto-restart function
  • Condenser high-temperature protection
  • Refrigerant leakage detection
  • Quiet outdoor operation, as low as 52 dB(A)
  • Anti-corrosive fin coating
  • Piping length 82 ~ 164 ft. (25-50 m.)
  • Cooling operating range 0° ~ 22° F (-17° ~ 50° C)
  • Heating operating range 0° ~ 86° F (-17° ~ 30° C)


    International Comfort Products DLCSRBH09AAK

  • Item#:
    DLCSRBH09AAK
    Manufacturer Item:
    DLCSRBH09AAK
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Mitsubishi MUZ-FH18NA2 Ductless Mini-Split System Heat Pump 18K BTU 230 VAC R410A

    Item#:
    MUZ-FH18NA2
    Manufacturer Item:
    MUZFH18NA2
    Manufacturer:
    MITSUBISHI ELECTRIC US, INC.
    Item#:
    152210
    Manufacturer Item:
    152210
    Manufacturer:
    SOUTHWARK METAL MFG
  • TXV and manifold positioned to the side for easier cleaning
  • Innovative drain pan design for complete water removal
  • 2-piece delta plate for easier removal and cleaning
  • Cabinet width match flush with International Comfort Products gas furnaces
  • Removable front access panel
  • Easy slide - out coil for inspection
  • Hemmed flanges for safer handling
  • Foil faced insulation
  • Non - sweat cabinet, even at extreme conditions
  • Cabinets meet or exceed 2% air leakage codes
  • 1 or 2-UV light knock - outs provided on cabinet
  • Aluminum main tubing and aluminum fins (copper stubs) for field connection
  • (2) condensate drain connections (additional (2) for horizontal installation)
  • 5 years limited parts warranty
  • Aluminum hairpin
  • Sales digit (major revision)
  • Item#:
    EDM4X24FAL
    Manufacturer Item:
    EDM4X24FAL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 25 - 36 of 60 ▶|
    View: