Resideo Braukmann DS06 Dial Set Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static pressure only).

Built-In Dial-Set- no gauge is needed to install or set static pressure
• Built-in strainer to simplify maintenance
• Fabric reinforced diaphragm regulator, stainless steel and engineered thermoplastics internal parts
• Balanced single seat construction
• Minimum pressure differential between inlet and outlet ports is 14.5 psig
• Plus or minus 4 psig dial calibration
• Less than 0.25% of weighted average of low lead content
• 1/4" NPT gauge tap
• 10:1 maximum reduction ratio
• Double union sweat union fittings
  
  

  Resideo Braukmann DS06-101-DUT-LF

Bell & Gossett B138-LF F3 Brass Dual Unit Valve 1/2" NPT 30 PSI Relief x 12 PSI Reducing

Bell & Gossett B138-LF

Watts Water BD911S Bronze Combination Fill Valve Feeder and Backflow Preventer, 1/2" NPT

Pre-assembled for ease of installation
• Push butTon fast fill with auto-stop to prevent system over-pressurization
• Dial indicator eliminates need for pressure gauge
• High capacity fill valve for quick system filling and purging
• All bronze body construction union solder x NPT connections
• Dial indicator plus or minus 2 psi
• Series BD911 combination fill valve and backflow preventer consists of a model 9D backflow preventer and model BD1156F feed water pressure regulator in one pre-assembled unit
• Combination bronze dial set fill valve
  
  

  Watts Water BD911S

Bell & Gossett B138-1 #8 Brass Dual Unit Valve 1/2" NPT 30 PSI Relief 12 PSI Reducing
Reducing valves fill the system to a preset pressure for optimum performance. Combination dual unit valves include pressure reducing valve and relief valve. Both Valves are equipped with an EPDM diaphragm. The diaphragm operated relief valve operates with a low differential between opening and closing pressures. The diaphragm operated pressure reducing valve is equipped with an inlet strainer and built-in low inlet pressure check valve.

Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system
• Relief and B-38 pressure reducing component valves
  
  

  Bell & Gossett B138-1

Bell & Gossett B7-12 Cast Brass Pressure Reducing Valve, 3/4", NPT, 10 - 25 psig

Fast fill feature reduces start-up time and labor
• Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system Brass body construction is highly resistant to corrosion-ideal for water systems
• Reducing valves protect heating and plumbing systems against excessive line pressures
• Equipped with built-in-strainer and low inlet pressure check valve
• They are factory set at specified limits although adjustment is easily made
• Construction - cast brass body, with special insert diaphragm, EPDM check valve, brass seat, brass with EPDM insert stem, brass valve plate, stainer and strainer nut wetted parts and steel non-wetted parts
  
  

  Bell & Gossett B138-10A

Taco boiler feed valves automatically feed water to a system whenever pressure in the system drops below the pressure setting of the valve. The dual control models combine the boiler feed with an in-line pressure relief valve. The built-in check prevents emptying the system if incoming pressure falls. They feature fast fill rates and an exclusive, lockable fast fill lever. Each valve is adjustable from10 to 25 psi, has a built-in check to prevent the emptying of the system if incoming pressure fails, and the easy to use fast fill lever is lockable.

Fast fill rate
• Exclusive fast fill lever lock
• Built-in check to prevent emptying the system if incoming pressure fails
• Pressure setting adjustment separated from fast fill lever for easy, fast adjustment
• 100 psi maximum supply side pressure, 30 psi relief valve setting, 12 psi factory setting
  
  

  Taco B143-12

Bell & Gossett B-38 Cast Brass Pressure Reducing Valve, 1/2", NPT, 10 - 25 psig

Fast fill feature reduces start-up time and labor
• Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system
• Brass body construction is highly resistant to corrosion-ideal for water systems
• Reducing valves protect heating and plumbing systems against excessive line pressures
• Equipped with built-in-strainer and low inlet pressure check valve
• They are factory set at specified limits although adjustment is easily made
• Construction - cast brass body, with special insert diaphragm, EPDM check valve, brass seat, brass with EPDM insert stem, brass valve plate, stainer and strainer nut wetted parts and steel non-wetted parts
  
  

  Bell & Gossett B138-8A

Watts Regulators series 1450F dual controls regulator and relief Valve are for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, an attached iron body, diaphragm relief valve, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Series 1450F has high capacity performance and simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems.

Combination fill valve and safety pressure relief valve
• Tight seating check valve
• Purge lever for manual purging
• High capacity
• Stainless steel strainer to protect the valve disc from fouling
• 100 psi working , 15 psi set and 30 psi relief valve setting
  
  

  Watts Water B144-2

Strainer Basket Assembly for 47 51 51-2 247 247-2 847 and 851S Make-Up Water Feeders and Mechanical Water Feeder/Low Water Cut-Offs

Tetraseal o-ring included



McDonnell & Miller B123-4

Jason Industrial UniMatch Multi-Plus B124 Polyester Cord Classical V-Belt, Jason/Megadyne's Multi-Plus V-belts are designed to perform in tandem in multiple V-belt drives, maintaining drive efficiency and classical belt performance. Multi-Plus V-belts are always matched, easy to install and maintain. Jason Multi-Plus V-belts come in a complete range of sizes, are anti-static and offer oil and heat resistance meeting RMA requirements.,

Xylem B124

Watts Regulators series 1450F dual controls regulator and relief Valve are for use in commercial and residential hydronic heating systems to fill the boiler and piping system with water, and to maintain water pressure in the system at all times. It also provides make-up water to the system in the event of system leaks. It consists of an iron and bronze body construction with NPT threaded inlet and outlet connections, an attached iron body, diaphragm relief valve, a tight seating check valve, purge lever for manual purging, and a stainless steel strainer. Series 1450F has high capacity performance and simplified servicing design. It is suitable for use in the boiler feed lines of hydronic heating systems.

Combination fill valve and safety pressure relief valve
• Tight seating check valve
• Purge lever for manual purging
• High capacity
• Stainless steel strainer to protect the valve disc from fouling
• 15 psi set and 30 psi relief valve setting
  
  

  Watts Water B144-1

SA37-30 Water Feeder Float Assembly for 47 47-2 247 and 247-2 Controls

McDonnell & Miller B123-5