Bell & Gossett B7-12 Cast Brass Pressure Reducing Valve, 3/4", NPT, 10 - 25 psig

• Fast fill feature reduces start-up time and labor
• Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system Brass body construction is highly resistant to corrosion-ideal for water systems
• Reducing valves protect heating and plumbing systems against excessive line pressures
• Equipped with built-in-strainer and low inlet pressure check valve
• They are factory set at specified limits although adjustment is easily made
• Construction - cast brass body, with special insert diaphragm, EPDM check valve, brass seat, brass with EPDM insert stem, brass valve plate, stainer and strainer nut wetted parts and steel non-wetted parts

Sid Harvey Item #:B138-10A: Replaces Part #:'s : B138-10R,
,

Bell & Gossett B138-10A

Apollo Valves B133-3 Gauge Glass Nut 5/8" OD,

,

Apollo Valves B133-3

The high velocity series Taco 0012 Cartridge Circulator is designed for high flow/medium head applications in large residential/light commercial hydronic heating, radiant heating and chilled water cooling systems. The unique ACB anti-condensate baffle with ambient air flow prevents the build up of condensate on the motor windings when pumping chilled water. Its unique field-serviceable cartridge contains all moving parts. Replacing the cartridge rebuilds the circulator. With no mechanical seal, the self-lubricating, maintenance free design provides unmatched reliability. Compact and lightweight, with excellent performance characteristics, the 0012 is ideal for high efficiency jobs where space is a premium. Available in cast iron or stainless steel construction.

• Exclusive ACB anti-condensate baffle with ambient air flow-protects motor windings against condensate buildup
• High velocity performance - compact design
• Quiet, efficient operation
• Direct drive - low power consumption
• Unique replaceable cartridge design - field serviceable
• Self-lubricating
• No mechanical seal
• Unmatched reliability, maintenance free
• Universal flange to flange dimensions
• Ceramic shaft
• Carbon bearings, stainless Steel cartridge, aluminum stator housing
• EPDM o-ring and gaskets

,
,

Taco air scoop's special design and internal baffles of Taco air scoops slow water velocity to separate the air from solution. Thanks to this design, Taco air scoops efficiently remove air to provide noiseless, air-free hydronic heating, cooling or combination systems. They also provide an economic way to integrate air elimination by the connection of either a plain steel or diaphragm expansion tank.

• 1-piece cast iron construction
• Never requires any servicing
• Engineered baffle separates air from water
• Each air scoop has a vent connection on top for the installation of a 1/8" Taco 400-3 or 416-1 Hy-Vent and 1/2" bottom tapping for a diaphragm expansion tank
• The 1-1/2 - 4" air scoops also have an additional top tapping for the connection of a plain steel expansion tank
• Water or water/glycol media

,
,

Taco B153-11

Diversified Heat Transfer B42-15 Tankless Hot Water Coil Thermo-Dynamics Boilers 7-3/4" Length,

Sid Harvey B136 Pressure and Temperature Gauge, 3-1/4" Dial, 1/2"Sid Harvey Item #:B136: Replaces Part #:'s : 2K844,
,

Sid Harvey B136

Amtrol Parts B135-41 Diaphragm Type Expansion Tank 4.4 Gallon 1/2" MPT 30 Lbs

• Accepts expanded water as system temperature rises to reduce pressure build-up
• Helps reduce energy consumption and reduces system wear
• Suitable in propylene glycol applications with mixtures up to 50%
• Heavy-duty butyl/EPDM diaphragm
• Steel system connection
• Projection welded air valve
• Made in USA,
  
  ,
  
  
  

  Amtrol Parts B135-41

Noisy pipes, valves, and other air-related noises are often accepted as the signs of a functioning system. Excessive pump noise, cavitation, and cascading in terminal units are considered normal. But air in system water can cause corrosion, reduced efficiency, poorly heated or inadequately cooled rooms, accelerated component wear and on-going complaints. There is a device that will keep your system free of air permanently. Less maintenance, quiet operation, fewer costs!. Unlike conventional air eliminators or air scoops, the Spirovent completely eliminates 100% of the free air, 100% of the entrained air, and up to 99.6% of the dissolved air in the system. Consisting of woven copper wire soldered to a copper tube, the patented Spirotube creates a low velocity area in the Spirovent that scrubs the bubbles from the water. The air bubbles rise and collect in the air chamber before they are vented from the system via an integral automatic valve. Air problems become a thing of the past.

• Maintenance free
• No venting required
• Vent head is designed to stay dry, dirt and leak resistant
• 1/2" male thread port for pressure testing or remote venting of unwanted gases
• Quiet operation
• Increased component life
• Reduced oxygen based corrosion and pump cavitation
• The automatic air vent is guaranteed not to leak and can only be closed by the installer for a pressure test
• The air chamber has been designed so that dirt cannot reach the valve
• Large capacity collection chamber reduces the need for frequent draining
• Drain valve for flushing out the dirt
• Brass vent head
• Non-ferrous float
• ViTon seal and o-ring
• Copper coalescing medium

Sid Harvey Item #:B156-22: Replaces Part #:'s : L38-344,
,

Spirotherm B156-22

Watts Regulators series 740 boiler pressure relief valves are used in hot water space heating boiler applications to protect against excessive pressure on all types of hot water space heating boiler equipment. It consists of a iron body construction with expanded outlet drain connections for hot water space heating boilers, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 740 offers large discharge capacity, resists corrosive water conditions, resists sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.

• Iron body with expanded outlets for hot water space heating boilers
• Seat located above drain, water can't be trapped and sediment can't foul seat
• Non-mechanical seat-to-disc alignment will not stick or freeze
• Water seal of high temperature resisting material isolates spring working parts from water during relief

Sid Harvey Item #:B145-5: Replaces Part #:'s : 35699,

,

Watts Water B145-5

Sid Harvey B136-1 Pressure and Temperature Gauge, 3-1/4" Dial, 1/2Sid Harvey Item #:B136-1: Replaces Part #:'s : 2K845,

,

Sid Harvey B136-1

Noisy pipes, valves, and other air-related noises are often accepted as the signs of a functioning system. Excessive pump noise, cavitation, and cascading in terminal units are considered normal. But air in system water can cause corrosion, reduced efficiency, poorly heated or inadequately cooled rooms, accelerated component wear and on-going complaints. There is a device that will keep your system free of air permanently. Less maintenance, quiet operation, fewer costs!. Unlike conventional air eliminators or air scoops, the Spirovent completely eliminates 100% of the free air, 100% of the entrained air, and up to 99.6% of the dissolved air in the system. Consisting of woven copper wire soldered to a copper tube, the patented Spirotube creates a low velocity area in the Spirovent that scrubs the bubbles from the water. The air bubbles rise and collect in the air chamber before they are vented from the system via an integral automatic valve. Air problems become a thing of the past.

• Maintenance free
• No venting required
• Vent head is designed to stay dry, dirt and leak resistant
• 1/2" male thread port for pressure testing or remote venting of unwanted gases
• Quiet operation
• Increased component life
• Reduced oxygen based corrosion and pump cavitation
• The automatic air vent is guaranteed not to leak and can only be closed by the installer for a pressure test
• The air chamber has been designed so that dirt cannot reach the valve
• Large capacity collection chamber reduces the need for frequent draining
• Drain valve for flushing out the dirt
• Brass vent head
• Non-ferrous float
• ViTon seal and o-ring
• Copper coalescing medium

Sid Harvey Item #:B156-21: Replaces Part #:'s : L38-434,
,

Spirotherm B156-21

Sid Harvey B131-11 High Pressure Gauge Glass, 10 Inch L x 5/8 Inch Dia,

• Useful in a variety of applications, including monitoring the amount of oil in tank
• Gauge glasses are required by the ASME boiler and pressure code on steam boilers
• Allows the liquid level in any vessel to be visually inspected
• These sets and accessories fit the vast majority of steam boilers

Sid Harvey Item #:B131-1: Replaces Part #:'s : G34-973,
,

Sid Harvey B131-11