Honeywell L404F1102 Pressure Control 0-150 PSI Auto Recycle,

Honeywell L404F1102

Honeywell L404F1367 Pressure Control 0-8 PSI,
,

L404F1367

Resideo PA404A is a pressure actuated high limit, safety control for steam heating boilers. It breaks an electrical circuit to shut down the burner if steam pressure rises above a safe level.

The PA404B is used with suspension-type unit heaters to make the fan circuit when a pressure rise indicates the presence of steam.

Each model contains an SPST MICRO SWITCH snap-acting switch.Sensitive pressure-actuated diaphragm expands or contracts with pressure variations, moving a lever mechanism which operates the snap switch.

A screw on top of the case allows set point adjustment without removing the cover.Differential is adjusted by means of a dial located inside the case..,
,

PA404A1009

Sid Harvey Honeywell Pressuretrol PA404A Pressure Controller with additive differential, 0.5 - 9 psi, 3-3/8 Inch W x 4-15/32 Inch H x 2-1/4 Inch D

• Pressure actuated high limit, safety control for steam heating boilers, It breaks an electrical circuit to shut down the burner if steam pressure rises above a safe level
• Contains an SPST Micro switch snap-acting switch
• Sensitive pressure actuated diaphragm expands or contracts with pressure variations, moving a lever mechanism which operates the snap switch
• A screw on top of the case allows setpoint adjustment without removing the cover
• Differential is adjusted by means of a dial located inside the case
• Recommended minimum setpoint is differential setting plus 1-1/2 psi
• Stainless steel diaphragm sensor element
• Makes at setpoint on pressure fall breaks at setpoint plus differential on pressure rise Honeywell Pressuretrol PA404A Pressure Controller with additive differential, 0.5 - 9 psi, 3-3/8 Inch W x 4-15/32 Inch H x 2-1/4 Inch D,
  
  
  
  

  C354R

Bell & Gossett B-38 Cast Brass Pressure Reducing Valve, 1/2", NPT, 10 - 25 psig

• Fast fill feature reduces start-up time and labor
• Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system
• Brass body construction is highly resistant to corrosion-ideal for water systems
• Reducing valves protect heating and plumbing systems against excessive line pressures
• Equipped with built-in-strainer and low inlet pressure check valve
• They are factory set at specified limits although adjustment is easily made
• Construction - cast brass body, with special insert diaphragm, EPDM check valve, brass seat, brass with EPDM insert stem, brass valve plate, stainer and strainer nut wetted parts and steel non-wetted parts

Sid Harvey Item #:B138-8A: Replaces Part #:'s : B138-7R,
,

Bell & Gossett B138-8A

Bell & Gossett B7-12 Cast Brass Pressure Reducing Valve, 3/4", NPT, 10 - 25 psig

• Fast fill feature reduces start-up time and labor
• Low inlet pressure check valve help prevent loss of system pressure if the supply water drops below system pressure
• Convenient cleanable strainer is designed to prevent dirt and sediment from entering the system Brass body construction is highly resistant to corrosion-ideal for water systems
• Reducing valves protect heating and plumbing systems against excessive line pressures
• Equipped with built-in-strainer and low inlet pressure check valve
• They are factory set at specified limits although adjustment is easily made
• Construction - cast brass body, with special insert diaphragm, EPDM check valve, brass seat, brass with EPDM insert stem, brass valve plate, stainer and strainer nut wetted parts and steel non-wetted parts

Sid Harvey Item #:B138-10A: Replaces Part #:'s : B138-10R,
,

Bell & Gossett B138-10A

Resideo Braukmann DS06 Dial Set Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static pressure only).

• Built-In Dial-Set- no gauge is needed to install or set static pressure
• Built-in strainer to simplify maintenance
• Fabric reinforced diaphragm regulator, stainless steel and engineered thermoplastics internal parts
• Balanced single seat construction
• Minimum pressure differential between inlet and outlet ports is 14.5 psig
• Plus or minus 4 psig dial calibration
• Less than 0.25% of weighted average of low lead content
• 1/4" NPT gauge tap
• 10:1 maximum reduction ratio
• Double union sweat union fittings

,
,

DS06-101-DUT-LF

Resideo Braukmann DS06 Dial Set Pressure Regulating Valve is a high quality pressure regulating valve that maintains a constant outlet pressure over a wide range of inlet supply pressures. It is suitable for potable water and irrigation applications. The downstream pressure adjustment dial eliminates the need for a pressure gauge when adjusting the pressure setting (static pressure only).

• Built-In Dial-Set- no gauge is needed to install or set static pressure
• Built-in strainer to simplify maintenance
• Fabric reinforced diaphragm regulator, stainless steel and engineered thermoplastics internal parts
• Balanced single seat construction
• Minimum pressure differential between inlet and outlet ports is 14.5 psig
• Plus or minus 4 psig dial calibration
• Less than 0.25% of weighted average of low lead content
• 1/4" NPT gauge tap
• 10:1 maximum reduction ratio
• Double union sweat union fittings

,
,

DS06-101-DUS-LF

Watts Regulators series 740 boiler pressure relief valves are used in hot water space heating boiler applications to protect against excessive pressure on all types of hot water space heating boiler equipment. It consists of a iron body construction with expanded outlet drain connections for hot water space heating boilers, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 740 offers large discharge capacity, resists corrosive water conditions, resists sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.

• Iron body with expanded outlets for hot water space heating boilers
• Seat located above drain, water can't be trapped and sediment can't foul seat
• Non-mechanical seat-to-disc alignment will not stick or freeze
• Each hot water space heating boiler shall be equipped with a pressure relief valve set to relieve below the maximum boiler working pressure
• Water seal of high temperature resisting material isolates spring working parts from water during relief

Sid Harvey Item #:B145-6: Replaces Part #:'s : 24603,
,

B145-6

Watts Regulators series 740 boiler pressure relief valves are used in hot water space heating boiler applications to protect against excessive pressure on all types of hot water space heating boiler equipment. It consists of a iron body construction with expanded outlet drain connections for hot water space heating boilers, non-metallic disc-to-metal seating, stainless steel spring, and test lever. Series 740 offers large discharge capacity, resists corrosive water conditions, resists sticking and freezing, and prevents water and sediment from being trapped in the seat. It is designed for emergency safety relief and shall not be used as an operating control.

• Iron body with expanded outlets for hot water space heating boilers
• Seat located above drain, water can't be trapped and sediment can't foul seat
• Non-mechanical seat-to-disc alignment will not stick or freeze
• Water seal of high temperature resisting material isolates spring working parts from water during relief

Sid Harvey Item #:B145-5: Replaces Part #:'s : 35699,

,

Watts Water B145-5

M335-M2 Bronze 2-Port Pressure Safety Relief Valve, 3/4", MNPT x FNPT, 30 psi Watts Regulator series 335 ASME rated boiler pressure relief valves were developed to fill the OEM need of the hydronic industry for a smaller valve on popular size boilers up to 510000 BTU at 30 psi. The compact design, all bronze construction and modern appearance make them an ideal choice for a wide variety of smaller size OEM boilers. ASME section IV at 30 psi set point.
,
,

Watts Water 0342692

Watts Regulator series 335 ASME rated boiler pressure relief valves were developed to fill the OEM need of the hydronic industry for a smaller valve on popular size boilers up to 510000 BTU at 30 psi. The compact design, all bronze construction and modern appearance make them an ideal choice for a wide variety of smaller size OEM boilers. ASME section IV at 30 psi set point.,
,

Watts Water 0342691