The Field RC is furnished as standard equipment on many leading brands of oil or coal-fired heating equipment. It is calibrated to allow for easy adjustment to the furnace or boiler manufacturer's specifications. Designed for settings from 0.02 - 0.08", this control is so sensitive that instrumentation should be used when adjusting the unit during installation.

Sid Harvey Item #:100-30: Replaces Part #:'s : x71-292,
,

Field Controls 100-30

The Field RC is furnished as standard equipment on many leading brands of oil or coal-fired heating equipment. It is calibrated to allow for easy adjustment to the furnace or boiler manufacturer's specifications. Designed for settings from 0.02 - 0.08", this control is so sensitive that instrumentation should be used when adjusting the unit during installation.

Sid Harvey Item #:100-24: Replaces Part #:'s : x89-860,
,

Field Controls 100-24

Field Controls 01950201 10" M+MG2 barometric draft control for gas and oil type M+MG2 barometric draft controls overview solid, oil or gas commercial/industrial, this is a series of compact, rugged, heavy-duty controls for use on large residential, commercial, and industrial applications. The Field Type M+MG2 draft control provides precise draft regulations for solid fuels, oil, gas, or oil/gas appliances requiring only the simplest, on-the-job adjustments depending on which fuel is to be utilized. In a gas installation, the double-acting Type M+MG2 is specified instead of a draft hood to give the appliance the assistance of the chimney. In a duel fuel oil/gas or a gas-fired only application, use the M+MG2 as a double-acting draft control with the optional Field Thermal Switch accessory. Use the M+MG2 as a single-acting draft control for oil or solid fuel applications. For any installation with 10" or larger diameter vent pipe, specify our standard M+MG2 Draft Control, the unit that can be adapted to any fuel. The moving part (gate) rests on a long, thin, stainless steel knife edge which, in turn, is supported by self-aligning and self-cleaning bearings. When the heavy gauge gate moves, only the knife edge rests on the bearing for minimum friction and maximum sensitivity to draft changes.

Sid Harvey Item #:100-4: Replaces Part #:'s : 111,
,

Field Controls 100-4

Apollo Valves 10-407-05 Bronze Safety Relief Valve, 3/4", MNPT x FNPT, 30 psig

• Corrosion resistant construction
• Standard stainless steel spring
• Made in USA

Sid Harvey Item #:10-407-05: Replaces Part #:'s : 27620,
,

Apollo Valves 10-407-05

The Field RC is furnished as standard equipment on many leading brands of oil or coal-fired heating equipment. It is calibrated to allow for easy adjustment to the furnace or boiler manufacturer's specifications. Designed for settings from 0.02 - 0.08", this control is so sensitive that instrumentation should be used when adjusting the unit during installation.

Sid Harvey Item #:100-22: Replaces Part #:'s : x71-184,
,

Field Controls 100-22

Field Controls 100-20 Barometric Draft Control W/Collar 6" For proper operation and efficient fuel consumption in oil, gas, and/or coal-fired heating appliances, draft must remain constant. When it is, combustion is more complete, fuels are utilized efficiently, and money is saved. Field Draft Controls maintain consistent draft by counteracting the negative forces caused by changes in temperature and barometric pressure, as well as the effects of wind.

• With collar

Sid Harvey Item #:100-20: Replaces Part #:'s : x71-179,

,

Field Controls 100-20

Gar-Ber 11BV-RK Residential Disposable Spin-On Replacement Oil Filter, 3/8" NPT, 500 sq-inch, 3-3/4" W x 9" H

Gar-Ber 11BV-RK

Gar-Ber 11V-R Aluminum Head Spin-On Fuel Oil Filter with Head, 3/8", NPT, 10 micron

gar-ber 11v-r

Garber 11BV-R Epoxy Coated Spin On Filter No Gauge,

gar-ber 11bv-r

Gar-Ber 11BV-MK Epoxy Coated Aluminum Head Commercial Spin-On Disposable Oil Filter, 35 micron, 35 and 90 gph, 3/8" NPT

Gar-Ber 11BV-MK

General Filters 1A-25A Oil Filter, 3/8" NPT, 10 gph

Mitco 264 BIO Galvanized Complete Micro-Flow Oil Filter Element

• Oil filters come with the patented filter element made of continuous, micro-spun fiber
• The non-shed design help eliminate plugged nozzles and strainers
• Hot dipped finish for rust protection, inside and out
• Using precision die cast aluminum eliminates the leaks associated with sand cast, cast iron
• #380 aluminum alloy top for 50% greater tensile strength
• High capacity containment reservoir extends filter life
• Highest UL pressure rating
• Highest UL gph rating
• Zinc plated internal components resist rust formation and make center bolt removal easy
• 360 deg screwdriver slot for fast and easy removal
• Bio compatible filter

,
,