Robertshaw G569-25 Ignition Control Lock-Out Style SP735,
,

White Rodgers Cooling Controls 3046-5 Mercury Flame Sensor, 2-1/16" W x 2-3/4" H x 1-7/8" D

• Contacts close approximately 60 sec after pilot is ignited, open approximately 40 sec after flame is extinguished
• Prevent gas flow to main burner if pilot flame is not burning or is insufficient to properly ignite main burner
• These sensors combine a rugged snap-action switch and powerful mercury actuated thermal element
• Used with natural, manufactured or mixed gases and with LP gases where means are provided for obtaining automatic pilot gas shut-off
• Switch may be conveniently mounted in any position
• Cover is easily removed, making switch terminals readily accessible
• No button to depress - sensors are recycling type which require relighting or possible restoration of proper gas pressure to return to operation
• 90 VA at 30 VAC, 125 VA at 120 and 240 VAC electrical rating

Sid Harvey Item #:G581: Replaces Part #:'s : 24325,

The Robertshaw Carbide Series Hot Surface Ignitors deliver dependable ignition in heating systems of every description: furnaces, boilers, rooftop heaters, infrared burners, unit heaters, water heaters, and many other types of HVAC equipment. 41-412 Silicon Carbide Hot Surface Furnace Igniter, 120 VAC, 5-1/4" L Lead

Robertshaw G569-59

The L62 series Baso safety shutoff devices are for use on all gas-fired, standing pilot equipment that requires main burner shutoff when the pilot is extinguished. Typical applications include domestic central heating and commercial space heating appliances, as well as industrial processing equipment (for example, die-casting machines and degreasers). Monitor the pilot flame through the use of a thermocouple. If the pilot flame is extinguished, the switch will interrupt gas flow to the main burner and pilot burner, shutting down the appliance.

• The L62 has a manual reset feature, and is available in models with or without 100% shut-off
• The L62 has a thermo-electric power unit assembly that receives its energy from a heated thermocouple
• If the pilot flame is extinguished, the main valve circuit is interrupted and gas flow to the main burner (and pilot burner in 100% shut-off model L62GB) is stopped
• Both L62 models contain an electric interruption feature that only allows pilot gas flow during the lighting or resetting cycle
• When lighting the pilot, the main valve electrical circuit is interrupted until the pilot flame is established and the reset butTon is released
• Allows only pilot gas flow during lighting cycle
• 1 conduit opening

Sid Harvey Item #:G570: Replaces Part #:'s : 10700,

White Rodgers Cooling Controls 767A-361 Silicon Carbide Hot Surface Igniter, 120 VAC, 5-1/4" L Lead

White Rodgers G568-23

White Rodgers Cooling Controls 760-401 Tear Drop Mount Flame Sensor for Hot Surface Igniter, 30" Lead

White Rodgers G568-30

Baso J998MDA-2H Universal 8-Tip Combination Standing Pilot Burner for Ignition Systems

baso g396-8

Robertshaw Controls 10-114 Pilot Orifice for 1820, 1830 (2C and 2CH) Pilot, Heating and Cooking, 0.01", LP Gas

Robertshaw G544-24

Directbrand HSIURK120VF Glazed 95% Alumina Polished Ceramic Silicon Nitride Universal Flat Igniter, 120 volt, 3.3 - 4.2 amp

direct brand hsiurk120vf

Sealed Unit Parts IG403K Silicon Carbide Hot Surface Flat Universal Igniter, 120 volt, 3.5 - 5 amp

Sealed Unit Parts IG403K

Sealed Unit Parts IG4000 Silicon Carbide Hot Surface Flat Super Igniter Kit, 120 volt, 3.5 - 5 amp

• Universal replacement minimizes inventory
• Superior gas lighting ability
• Lower power consumption and 18 ga copper high temperature fiberglass insulated lead wires
• Sealed Unit Parts flat igniters offer an efficient, stronger, reliable hot surface silicon carbide design
• More robust in transit and higher resistance to oxidation
• Longer usable life
• Includes brackets and hardware to replace hundreds of OEM furnace and boiler igniters

Sid Harvey Item #:IG4000: Replaces Part #:'s : 40148,

Packard IG3033 Silicon Carbide Hot Surface Flat Ignitor Kit, 120 volt, 5-1/2" L Lead