Brand Name
Cooling BTU
Heating BTU
Voltage
Phase
Refrigerant
SEER
|◀ 37 - 48 of 168 ▶|
View:
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

  • Item#:
    CAS121HMA0A00A
    Manufacturer Item:
    CAS121HMA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

  • Item#:
    CHS121SGA0A00A
    Manufacturer Item:
    CHS121SGA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

  • Item#:
    CHS121SHA0A00A
    Manufacturer Item:
    CHS121SHA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

  • Item#:
    CAS183HTA0A00A
    Manufacturer Item:
    CAS183HTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

  • Item#:
    CHS183HTA0A00A
    Manufacturer Item:
    CHS183HTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

  • Item#:
    CAS181HAA0A00A
    Manufacturer Item:
    CAS181HAA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

  • Item#:
    CAS153HTA0A00A
    Manufacturer Item:
    CAS153HTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

  • Item#:
    CHS183LTA0A00A
    Manufacturer Item:
    CHS183LTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

  • Item#:
    CAS183LTA0A00A
    Manufacturer Item:
    CAS183LTA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

  • Item#:
    CAS181LAA0A0AA
    Manufacturer Item:
    CAS181LAA0A0AA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on 072 to 121 models, two stage cooling capacity control on 180 to 240 models
  • All models utilize round copper tube, aluminum plate fin condenser coils (RTPF)
  • Brass suction and liquid line service valves
  • Fully hermetic scroll compressors with crankcase heater and suction line accumulators
  • Compressors include overload protection and vibration isolation for further enhancement of
  • quiet operation
  • Comfort AlertTM diagnostic and troubleshooting control system

    LED GoNoGo and fault code

    Built in time guard antishort cycle

    Phase protection

    Fault code retention logic
  • Low volt compressor contactor protector
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Prepainted exterior panels and primercoated interior panels tested to 500 hours salt spray protection
  • Filter drier standard with each unit (shipped for field installation)
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • All units have high pressure and loss of charge protection
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 35°F (2°C )
  • Models with optional low ambient control provide cooling operation down to 20°F (29°C )
  • All units factory run tested

  • Item#:
    CHS183STA0A00A
    Manufacturer Item:
    CHS183STA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Single stage cooling capacity control on all 072-241 models
  • Two stage cooling capacity control on all 120-240 models
  • Round copper tube aluminum plate fin (RTPF) condenser coils on all models
  • Brass suction and liquid line service valves
  • Full perimeter base rail with built-in rigging adapters and fork truck slots
  • Galvanized steel cabinet with pre-painted exterior panels and primer-coated
  • interior panels tested to 500 hours salt spray protection
  • Fully hermetic scroll compressor with crankcase heater
  • Compressor mounted on independent vibration isolators
  • Comfort AlertTM Diagnostic Board
  • LED Go-No-Go and fault code
  • Built in time guard anti-short cycle
  • Phase protection
  • Fault code retention logic
  • Low volt compressor contactor protector
  • All units have high and low pressure switches
  • Direct drive permanently lubricated condenser fan motors
  • Newly designed terminal board facilitates simple safety circuit
    troubleshooting and simplified control box arrangement
  • Outdoor temperature cooling operation range up to 125°F (52°C) and down to 40°F (4°C ) using winter start kit
  • Models with optional low ambient control provide cooling operation down to -20°F (-29°C )
  • All units factory run tested

  • Item#:
    CAS240HEA0A00A
    Manufacturer Item:
    CAS240HEA0A00A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 37 - 48 of 168 ▶|
    View: