Brand Name
Cooling BTU
Heating BTU
Voltage
Phase
Refrigerant
SEER

Fujitsu General America’s feature-rich line of year-round cooling and heating residential heat pump units range from 14 to 20 SEER in 1.5 to 5 ton sizes. Scroll compressor technology make these units efficient and durable. Optimized fan orifice contributes to optimal airflow and enhanced mufflers and improved refrigerant tubing create better overall performance. Built-in defrost capabilities. The composite base pan adds to quiet performance and helps eliminate corrosion. The 15” industry-leading corner service access and a roomy diagnostic service window means maintenance calls go quickly. Powder coat paint system provides a lasting professional finish.

 

|◀ 97 - 108 of 161 ▶|
View:
Heat Controller HBH009A1C30CRS Condenser Water Source Geothermal; Right 9K 230/1
,

HBH009A1C30CRS

Item#:
HBH009A1C30CRS
Manufacturer Item:
HBH009A1C30CRS
Manufacturer:
HEAT CONTROLLER LLC
Heat Controller HBH036A1C30CRS Condenser Water Source Geothermal; Right 36K 230/1
,

HBH036A1C30CRS

,

HBH036A1C30CRS

Item#:
HBH036A1C30CRS
Manufacturer Item:
HBH036A1C30CRS
Manufacturer:
HEAT CONTROLLER LLC
INDUSTRY LEADING FEATURES / BENEFITS
Energy Efficiency
  • 13.8 - 16.0 SEER2 / 11.2 - 13.0 EER2
  • Levels as low as 65 dBA
  • Design Features
  • Small footprint
  • Durable cabinet
  • All steel cabinet construction
  • Mesh coil guard
  • Reliability, Quality and Toughness
  • Scroll compressor
  • Factory-supplied filter drier
  • High pressure switch
  • Line lengths up to 250ft (76.2m)
  • Low ambient cooling (down to 0°F / -18°C) with approved low ambient accessory kits.
  • Item#:
    S4A5S30AKAWA
    Manufacturer Item:
    S4A5S30AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • REFRIGERATION CIRCUIT
  • 4 SEER/11.7 - 12.2 EER
  • Scroll compressor
  • Factory-supplied filter-drier
  • High pressure switch
  • Line lengths up to 250 feet (76.2m)
  • EASY TO INSTALL AND SERVICE
  • Small footprint
  • Easy access service valves on all models
  • Factory charged with R-410A refrigerant
  • BUILT TO LAST
  • Low ambient operation (down to -20ºF/-17.8ºC)
  • Ball-Bearing Fan Motor
  • Item#:
    NH4A436AHA
    Manufacturer Item:
    NH4A436AHA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • REFRIGERATION CIRCUIT
  • 4 SEER/11.7 - 12.2 EER
  • Scroll compressor
  • Factory-supplied filter-drier
  • High pressure switch
  • Line lengths up to 250 feet (76.2m)
  • EASY TO INSTALL AND SERVICE
  • Small footprint
  • Easy access service valves on all models
  • Factory charged with R-410A refrigerant
  • BUILT TO LAST
  • Low ambient operation (down to -20ºF/-17.8ºC)
  • Ball-Bearing Fan Motor
  • Item#:
    NH4H436AHA
    Manufacturer Item:
    NH4H436AHA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    • Quiet performance (as low as 74 decibels)*
    • Single-stage compressor operation
    • Durably built to withstand bad weather and debris
    • Designed for corrosion resistance and lasting performance
    • 10-Year Parts Limited Warranty+
    Item#:
    NH4A448AH
    Manufacturer Item:
    NH4A448AHA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • REFRIGERATION CIRCUIT
  • 4 SEER/11.7 - 12.2 EER
  • Scroll compressor
  • Factory-supplied filter-drier
  • High pressure switch
  • Line lengths up to 250 feet (76.2m)
  • EASY TO INSTALL AND SERVICE
  • Small footprint
  • Easy access service valves on all models
  • Factory charged with R-410A refrigerant
  • BUILT TO LAST
  • Low ambient operation (down to -20ºF/-17.8ºC)
  • Ball-Bearing Fan Motor
  • Item#:
    NH4A460AHA
    Manufacturer Item:
    NH4A460AHA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Gallonvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection
  • Item#:
    N4H418GKP
    Manufacturer Item:
    N4H418GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Gallonvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection
  • Item#:
    N4H430GKP
    Manufacturer Item:
    N4H430GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Gallonvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection
  • Item#:
    N4H442GKP
    Manufacturer Item:
    N4H442GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Gallonvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection
  • Item#:
    N4H436GLP
    Manufacturer Item:
    N4H436GLP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Quiet performance
  • Single-stage compressor operation
  • Dual fuel capable with a compatible gas furnace and thermostat for energy-saving heating
  • Durably built to withstand bad weather and debris
  • Designed for corrosion resistance and lasting performance
  • Single-speed fan motor
  • System protecting high and low-pressure switches and filter drier
  • Durable, protective inlet grille panels allow easy coil cleaning
  • Baked-on powder coat finish over Gallonvanized steel
  • Compatible with humidity sensing thermostats
  • Suction line accumulator factory installed
  • Bi-flow filter-drier included for field installation
  • Integrated solid state control with time-temperature defrost
  • High and low pressure switches
  • Copper tube/aluminum fin coil
  • Easy access service valves
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Post-painted (black) coil fins
  • Coated, weather-resistant cabinet screws
  • Coated inlet grille with 3/8" spacing for extra protection
  • Item#:
    N4H436GHP
    Manufacturer Item:
    N4H436GHP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 97 - 108 of 161 ▶|
    View: