S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Brand Name
BTU
Voltage
Position
Refrigerant
Height
Depth
Width
Standard Features
Limited Warranty*
Multi-tap ECM (electronic commutating motor) motors - all sizes
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Cabinet construction features innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units
Horizontal hanging provisions on cabinet
No tools required to access filter
Newly improved filter rack area filter door insulation added for improved air seal
3- through 30-kW accessory heaters - field installed
Factory-supplied power plug
Easy plug-in provisions for heater installation
Entry options for high and low voltage wiring hook-up
Leak-preventing sweat connections
Thermostatic expansion valve, TXV, on all sizes
Designed for manufactured housing applications
International Comfort Products FJMA4X30L0BB
Item#:
FJMA4X30L0BB
Manufacturer Item:
FJMA4X30L0BB
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Air Handler Multi-Position 2 Ton 24K BTU ECM Motor TXV 208/230/1 R410A 49-5/8" H x 17-5/8" L x 22" D
Standard Features
Limited Warranty*
Multi-tap ECM (electronic commutating motor) motors - all sizes
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Cabinet construction features innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units
Horizontal hanging provisions on cabinet
No tools required to access filter
Newly improved filter rack area filter door insulation added for improved air seal
3- through 30-kW accessory heaters - field installed
Factory-supplied power plug
Easy plug-in provisions for heater installation
Entry options for high and low voltage wiring hook-up
Leak-preventing sweat connections
Thermostatic expansion valve, TXV, on all sizes
Designed for manufactured housing applications
International Comfort Products FJMA4X24L0BC
Item#:
FJMA4X24L0BC
Manufacturer Item:
FJMA4X24L0BC
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Standard Features
Limited Warranty*
Multi-tap ECM (electronic commutating motor) motors - all sizes
Large, grooved tube, louvered fin coils
Efficient, quiet, time-tested blower housings and diffusers
Sturdy, drainable condensate pans
Cabinet construction features innovations designed to prevent cabinet sweating
Tested for condensate disposal in much tougher conditions than Air Conditioning and Refrigeration Institute requirements
Super-thick R-4.2 insulation with vapor barrier
Cabinet air leakage of less than 2% at 0.5 in.W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE 193 standard.
Installation-flexible, multipoise units
Horizontal hanging provisions on cabinet
No tools required to access filter
Newly improved filter rack area filter door insulation added for improved air seal
3- through 30-kW accessory heaters - field installed
Factory-supplied power plug
Easy plug-in provisions for heater installation
Entry options for high and low voltage wiring hook-up
Leak-preventing sweat connections
Thermostatic expansion valve, TXV, on all sizes
Designed for manufactured housing applications
International Comfort Products FJMA4X18L0AB
Item#:
FJMA4X18L0AB
Manufacturer Item:
FJMA4X18L0AB
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
HORIZONTAL FAN COILS
FMU4Z and FMC4Z 11/2, 2, 21/2, and 3 Tons
FMU4X and FMC4X 11/2, 2, 21/2, and 3 Tons
Horizontal application only
Accessory fieldinstalled electric heat kits available in 3, 5, 6, 7.5, or 10 kW
40 VA 208/230v160 transformer
All Models use R410A TXV metering device
Adjustable condensate drainpan
FMC4X & FMC4Z
Horizontal return applications require field fabricated bottom cover
Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193
Cabinets constructed to prevent cabinet sweating
Refrigerant lines and electrical connections can be run out the back or side of casing
PERFORMANCE
PSC motor on all FMU4X & FMC4X models
ECM motor on all FMU4Z & FMC4Z models
EASY TO INSTALL AND SERVICE
Acoil design for maximum surface area
Multiple electrical, refrigerant lineset and drain line entry for application flexibility
Primary and secondary drain connections exit from the back or side of the cabinet
Supports furreddown ceiling open return and ducted return applications
Sweat connections for long term reliability
Grooved aluminum tube / aluminum fin coils on FMU4X & FMC4X models with AL in the 10th & 11th position
International Comfort Products FMU4Z1800AL
Item#:
FMU4Z1800AL
Manufacturer Item:
FMU4Z1800AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
HORIZONTAL FAN COILS
FMU4Z and FMC4Z 11/2, 2, 21/2, and 3 Tons
FMU4X and FMC4X 11/2, 2, 21/2, and 3 Tons
Horizontal application only
Accessory fieldinstalled electric heat kits available in 3, 5, 6, 7.5, or 10 kW
40 VA 208/230v160 transformer
All Models use R410A TXV metering device
Adjustable condensate drainpan
FMC4X & FMC4Z
Horizontal return applications require field fabricated bottom cover
Cabinets meet the requirement of 1.4% cabinet leakage rate when tested to ASHRAE Standard 193
Cabinets constructed to prevent cabinet sweating
Refrigerant lines and electrical connections can be run out the back or side of casing
PERFORMANCE
PSC motor on all FMU4X & FMC4X models
ECM motor on all FMU4Z & FMC4Z models
EASY TO INSTALL AND SERVICE
Acoil design for maximum surface area
Multiple electrical, refrigerant lineset and drain line entry for application flexibility
Primary and secondary drain connections exit from the back or side of the cabinet
Supports furreddown ceiling open return and ducted return applications
Sweat connections for long term reliability
Grooved aluminum tube / aluminum fin coils on FMU4X & FMC4X models with AL in the 10th & 11th position
International Comfort Products FMU4X2400AL
Item#:
FMU4X2400AL
Manufacturer Item:
FMUX2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features
Horizontal application only
Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
40 VA 208/230-1-60 supply voltage
All Models use R-410A TXV metering device
All Aluminum coils
Adjustable condensate drainpan
FMC4X & FMC4Z
Horizontal return applications require field fabricated bottom cover or solid access panel accessory kit
Cabinets meet the requirement of 1.4% cabinet leakage rate when texted to ASHRAE Standard 193
Cabinets constructed to prevent cabinet sweating
Refrigerant lines and electrical connections can be run out the back or side of casing
PSC motor on all FMU4X & FMC4X models
ECM motor on all FMU4Z & FMC4Z models
Easy to Install and Service
A-coil design for maximum surface area
Multiple electrical, refrigerant lineset and drain line entry for application flexibilty
Primary and secondary drain connections exit from the back or side of the cabinet.
Supports furred-down ceiling open return and ducted return applications
Sweat connections for long term reliability
Grooved aluminum tube / aluminum fin coils on FMU4X &
FMC4X models with "AL" in the 10th and 11th position of model number
International Comfort Products FMC4Z3000AL
Item#:
FMC4Z3000AL
Manufacturer Item:
FMC4Z3000AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features
Horizontal application only
Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
40 VA 208/230-1-60 supply voltage
All Models use R-410A TXV metering device
All Aluminum coils
Adjustable condensate drainpan
FMC4X & FMC4Z
Horizontal return applications require field fabricated bottom cover or solid access panel accessory kit
Cabinets meet the requirement of 1.4% cabinet leakage rate when texted to ASHRAE Standard 193
Cabinets constructed to prevent cabinet sweating
Refrigerant lines and electrical connections can be run out the back or side of casing
PSC motor on all FMU4X & FMC4X models
ECM motor on all FMU4Z & FMC4Z models
Easy to Install and Service
A-coil design for maximum surface area
Multiple electrical, refrigerant lineset and drain line entry for application flexibilty
Primary and secondary drain connections exit from the back or side of the cabinet.
Supports furred-down ceiling open return and ducted return applications
Sweat connections for long term reliability
Grooved aluminum tube / aluminum fin coils on FMU4X &
FMC4X models with "AL" in the 10th and 11th position of model number
International Comfort Products FMC4Z2400AL
Item#:
FMC4Z2400AL
Manufacturer Item:
FMC4Z2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Features
Horizontal application only
Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
40 VA 208/230-1-60 supply voltage
All Models use R-410A TXV metering device
All Aluminum coils
Adjustable condensate drainpan
FMC4X & FMC4Z
Horizontal return applications require field fabricated bottom cover or solid access panel accessory kit
Cabinets meet the requirement of 1.4% cabinet leakage rate when texted to ASHRAE Standard 193
Cabinets constructed to prevent cabinet sweating
Refrigerant lines and electrical connections can be run out the back or side of casing
PSC motor on all FMU4X & FMC4X models
ECM motor on all FMU4Z & FMC4Z models
Easy to Install and Service
A-coil design for maximum surface area
Multiple electrical, refrigerant lineset and drain line entry for application flexibilty
Primary and secondary drain connections exit from the back or side of the cabinet.
Supports furred-down ceiling open return and ducted return applications
Sweat connections for long term reliability
Grooved aluminum tube / aluminum fin coils on FMU4X &
FMC4X models with "AL" in the 10th and 11th position of model number
International Comfort Products FMC4Z1800AL
Item#:
FMC4Z1800AL
Manufacturer Item:
FMC4Z1800AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Air Handler Apartment Fan Coil 2-1/2 Ton 24K BTU 208/230 TXV/R410A 10-1/4" H x 37-1/4" W x 26-3/8" D
International Comfort Products FMC4X1800A Apartment Fan Coil Evaporator 1-1/2 Ton, 18K BTU 208/230 VAC
- TXV
- Horizontal return applications require field fabricated bottom cover
- Cabinets meet the requirement of 2% cabinet leakage rate at 1" WC of static pressure
- Cabinets constructed to prevent cabinet sweating
- Refrigerant lines and electrical connections can be run out the back or side of casing
- A-coil design for maXimum surface area
- Multiple electrical, refrigerant line set and drain line entry for application fleXibility
- Primary and secondary drain connections eXit from the back or side of the cabinet
- Supports furred - down ceiling open return and ducted return applications
- Sweat connections for long term reliability
- Grooved copper tube/aluminum fin coils
- 5 years limited parts warranty
- 1075 RPM rated, 3-speed PSC motor
- Dual blower, direct drive
- 40 VA, 208/230 VAC , 1 PH, 60 Hz transformer
- R410A,
,
Item#:
FMC4X1800A
Manufacturer Item:
FMC4X1800AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Upflow application only
Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
208/230160 supply voltage
Cabinet exterior is galvanized sheet metal
Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
Insulated for conditioned space (not to be installed in unconditioned spaces)
All Aluminum coils
FMA4P
For use with R410A refrigerant utilizing standard piston
FMA4X
R410A refrigerant, TXV standard
PERFORMANCE
PSC motor on all FMA4P
ECM motor on all FMA4X
Motor suspended on rubber grommets for quieter operation
Fresh air intake knockouts in cabinet
EASY TO INSTALL AND SERVICE
Units fits between standard stud spacings
All service access is located in the front
Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
No returnair ductwork required in specific applications
Wall hanging brackets included with the unit
International Comfort Products FMA4X3600AL
Item#:
FMA4X3600AL
Manufacturer Item:
FMA4X3600AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Upflow application only
Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
208/230160 supply voltage
Cabinet exterior is galvanized sheet metal
Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
Insulated for conditioned space (not to be installed in unconditioned spaces)
All Aluminum coils
FMA4P
For use with R410A refrigerant utilizing standard piston
FMA4X
R410A refrigerant, TXV standard
PERFORMANCE
PSC motor on all FMA4P
ECM motor on all FMA4X
Motor suspended on rubber grommets for quieter operation
Fresh air intake knockouts in cabinet
EASY TO INSTALL AND SERVICE
Units fits between standard stud spacings
All service access is located in the front
Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
No returnair ductwork required in specific applications
Wall hanging brackets included with the unit
International Comfort Products FMA4X3000AL
Item#:
FMA4X3000AL
Manufacturer Item:
FMA4X3000AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Upflow application only
Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW
208/230160 supply voltage
Cabinet exterior is galvanized sheet metal
Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193
Insulated for conditioned space (not to be installed in unconditioned spaces)
All Aluminum coils
FMA4P
For use with R410A refrigerant utilizing standard piston
FMA4X
R410A refrigerant, TXV standard
PERFORMANCE
PSC motor on all FMA4P
ECM motor on all FMA4X
Motor suspended on rubber grommets for quieter operation
Fresh air intake knockouts in cabinet
EASY TO INSTALL AND SERVICE
Units fits between standard stud spacings
All service access is located in the front
Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet
No returnair ductwork required in specific applications
Wall hanging brackets included with the unit
International Comfort Products FMA4X2400AL
Item#:
FMA4X2400AL
Manufacturer Item:
FMA4X2400AL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS