S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Bosch BMAC2430ANTD Evaporator Coil Cased TXV Installed Multi-Position
The cased evaporator coils are constructed with heavy duty commercial grade powder-coated steel for durability. Cased evaporator coils include easy-to-clean foil-back insulation which helps to ensure against energy loss through the cabinet as well as keeping the unit quiet. All-Aluminum fins with aluminum tubing help to prevent formicary corrosion while maintaining the high heat transfer efficiency thereby increasing longevity and cost savings of the unit. Boschs cased coil includes bottom and side drain pans so the unit can be mounted horizontally or vertically. The pans help reduce the build-up of mold, bacteria and airborne pollutants no matter the orientation. The pans are made of a strong recognized rated 94-5V (QMFZ2) plastic, and polyvinyl chloride (PVC) for strength and durability. For your protection, both drain pans have also been tested to resist UVC
Bosch BMAC3036ANTD
Item#:
BMAC3036ANTD
Manufacturer Item:
8733947950
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Bosch BOVA-60HDN1-M15G
-
Standard Features
- R-410A Chlorine-Free Refrigerant
- Inverter Compressor (33%-110% Speed), Modulation in 1% Increments
- Intelligent Oil Return Technology
- Inverter Driven Rotary Compressor
- Crankcase Heater Standard
- Compressor Sound Blanket
- Multiple System Protection:
- Outdoor coil is capable of withstanding 1000 hour salt spray test according to ASTM B117 standard
- AHRI certified; ETL listed
bosch bova-60hdn1-m15g
Item#:
BOVA-60HDN1-M15G
Manufacturer Item:
8-733-955-694
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
International Comfort Products FVM4x4800BL Copper Tube Multi-Position Cased A Fan Coil with TXV Metering, 4 Ton, 48K BTU 208/230 VAC
- TXV metering device factory installed
- High efficiency, 2-stage variable speed electronically commutated motor (ECM)
- Copper tube/aluminum fin coil
- Sweat connections
- Primary and secondary drain fittings with brass inserts
- Adjustable cooling and heating on/off delay
- Multiple electrical entry locations
- Time delay relay (TDR)
- HUD approved for manufactured housing
- Units tested and certified by manufacturer to achieve 2% or less leakage rate at 1" water column
- 1" thick insulation with R value of 4.2
- Humidifier/humidistat terminals
- Filter factory supplied
- Maximum fuse size 15 amp
- TXV and manifold positioned to the side for easier cleaning
- Zero clearance without heaters
- 10 years limited evaporator coil warranty and 7 years limited parts warranty
FVM4X4800BL
Item#:
FVM4X4800BL
Manufacturer Item:
FVM4X4800BL
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Bard W24AB-A05SXXXXJ Wall Mount A/C 2 Ton 230/1 15 KW
BARD WALL-MOUNTTM Air Conditioners 1.5 - 6 Ton Capacity W18A - W72A Models 208V - 460V 60 hz The Bard Wall-Mount Air Conditioner is an energy efficient self contained system, which is designed to offer maximum indoor comfort at a minimal cost without using valuable indoor floor space or outside ground space. This unit is the ideal product for versatile applications such as: new construction, modular offices, school modernization, telecommunication structures, portable structures, correctional facilities and many more. Factory or field installed accessories are available to meet specific job requirements for your unique application.Complies with efficiency requirements of ANSI/ASHRAE/IES 90.1-2019.
Certified to AHRI Standard 390-2021 for SPVU (Single Package Vertical Units).
Intertek ETL Listed to Standard for Safety Heating and Cooling Equipment ANSI/UL 1995/CSA 22.2 No. 236-05 Fourth Edition.
Commercial Product - Not intended for residential applications.
Bard is an ISO 9001:2015 Certified Manufacturer.
The AHRI Certified mark indicates Bard Manufacturing Company participation in the AHRI Certification program. For verification of individual certified products, go to www.ahridirectory.org.
BARD WALL-MOUNTTM Air Conditioners 1.5 - 6 Ton Capacity W18A - W72A Models 208V - 460V 60 hz The Bard Wall-Mount Air Conditioner is an energy efficient self contained system, which is designed to offer maximum indoor comfort at a minimal cost without using valuable indoor floor space or outside ground space. This unit is the ideal product for versatile applications such as: new construction, modular offices, school modernization, telecommunication structures, portable structures, correctional facilities and many more. Factory or field installed accessories are available to meet specific job requirements for your unique application.
Bard W24AB-A05SXXXXJ
Item#:
W24AB-A05SXXXXJ
Manufacturer Item:
W24AB-A05SXXXXJ
Manufacturer:
BARD MFG COMPANY INC.
International Comfort Products N4A4S24AKANA
Item#:
N4A4S24AKANA
Manufacturer Item:
N4A4S24AKANA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Rheem RGEA14048AJT101AB Package Gas/Electric 4 Ton 230/1 14 SEER 48,000 BTU cooling, 100,000 BTU Heating
- Weight 497 lbs
- Heating Capacity 100,000 BTU
- Height 41"
- Ignition Direct Spark
- Metering Device TXV
- Length 52.4375"
- Voltage 208/230 VAC
- Width 47.5625"Includes Filter Rack No
- Tonnage 4
- Refrigerant R-410A
- Blower Wheel 12" x 9"
- Blower Motor Type Constant Torque Programmable
- Blower Motor Speeds Multiple
- Blower Motor RPM 1075
- Blower Motor HP 3/4 HP
- Drive Type Direct
- Fuel Type Natural Gas or LP
- Filter Size (1) 24" x 24" x 1"
- EER 11
- Condenser Motor RPM 1075
- Drain Connection 3/4"
- Condenser Motor, Direct
Rheem RGEA14048AJT101AB
Item#:
RGEA14048AJT101AB
Manufacturer Item:
RGEA14048AJT101AB
Manufacturer:
FUJITSU
Bosch BOVA-36HDN1-M15G
-
Standard Features
- R-410A Chlorine-Free Refrigerant
- Inverter Compressor (33%-110% Speed), Modulation in 1% Increments
- Intelligent Oil Return Technology
- Inverter Driven Rotary Compressor
- Crankcase Heater Standard
- Compressor Sound Blanket
- Multiple System Protection:
- Outdoor coil is capable of withstanding 1000 hour salt spray test according to ASTM B117 standard
- AHRI certified; ETL listed
Bosch BOVA-36HDN1-M15G
Item#:
BOVA-36HDN1-M15G
Manufacturer Item:
8-733-955-693
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Bosch BMAC2430BNTD Evaporator Coil Cased TXV Installed Multi-Position
The cased evaporator coils are constructed with heavy duty commercial grade powder-coated steel for durability. Cased evaporator coils include easy-to-clean foil-back insulation which helps to ensure against energy loss through the cabinet as well as keeping the unit quiet. All-Aluminum fins with aluminum tubing help to prevent formicary corrosion while maintaining the high heat transfer efficiency thereby increasing longevity and cost savings of the unit. Boschs cased coil includes bottom and side drain pans so the unit can be mounted horizontally or vertically. The pans help reduce the build-up of mold, bacteria and airborne pollutants no matter the orientation. The pans are made of a strong recognized rated 94-5V (QMFZ2) plastic, and polyvinyl chloride (PVC) for strength and durability. For your protection, both drain pans have also been tested to resist UVC
Bosch BMAC2430BNTD
Item#:
BMAC2430BNTD
Manufacturer Item:
8733947948
Manufacturer:
BOSCH THERMOTECHNOLOGY CORP
Bard W18AB-A05ZXXXXJ Wall Mount A/C 1-1/2 Ton 230/1 5 KW
BARD WALL-MOUNTTM Air Conditioners 1.5 - 6 Ton Capacity W18A - W72A Models 208V - 460V 60 hz The Bard Wall-Mount Air Conditioner is an energy efficient self contained system, which is designed to offer maximum indoor comfort at a minimal cost without using valuable indoor floor space or outside ground space. This unit is the ideal product for versatile applications such as: new construction, modular offices, school modernization, telecommunication structures, portable structures, correctional facilities and many more. Factory or field installed accessories are available to meet specific job requirements for your unique application.Complies with efficiency requirements of ANSI/ASHRAE/IES 90.1-2019.
Certified to AHRI Standard 390-2021 for SPVU (Single Package Vertical Units).
Intertek ETL Listed to Standard for Safety Heating and Cooling Equipment ANSI/UL 1995/CSA 22.2 No. 236-05 Fourth Edition.
Commercial Product - Not intended for residential applications.
Bard is an ISO 9001:2015 Certified Manufacturer.
The AHRI Certified mark indicates Bard Manufacturing Company participation in the AHRI Certification program. For verification of individual certified products, go to www.ahridirectory.org.
BARD WALL-MOUNTTM Air Conditioners 1.5 - 6 Ton Capacity W18A - W72A Models 208V - 460V 60 hz The Bard Wall-Mount Air Conditioner is an energy efficient self contained system, which is designed to offer maximum indoor comfort at a minimal cost without using valuable indoor floor space or outside ground space. This unit is the ideal product for versatile applications such as: new construction, modular offices, school modernization, telecommunication structures, portable structures, correctional facilities and many more. Factory or field installed accessories are available to meet specific job requirements for your unique application.
Bard W18AB-A05ZXXXXJ
Item#:
W18AB-A05ZXXXXJ
Manufacturer Item:
W18AB-A05ZXXXXJ
Manufacturer:
BARD MFG COMPANY INC.
Amana P-Tac DHP093A35AA
Efficiency
13.4 - 16.0 SEER2 (13.5 - 16.5 SEER)
11.0 13.5 EER2 (11.0 - 14.5 EER)
Indoor air quality accessories available
Reliability
R-410A refrigerant - environmentally sound, wont deplete the ozone
layer and low lifetime service cost.
Scroll compressor
Internal pressure relief valve
Internal thermal overload
Filter drier
Durability
Protection Package:
Solid, durable sheet metal construction
Dense wire coil guard
International Comfort Products N4A4S18AKANA
Item#:
N4A4S18AKANA
Manufacturer Item:
N4A4S18AKANA
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
Rheem RGEA14048ACT101AA Package Gas/Electric 4 Ton 230/3 14 SEER 48,000 BTU cooling, 100,00 BTU Heating
- Weight 482 lbs
- Width 47.5"
- Height 4"
- Length 52.4375"
- SEER 14
- EER 12
- Refrigerant R-410A
- AFUE 81%
- CFM 3300
- CFM Cooling 1,600
- Cooling Capacity 48,000
- Heating Capacity 10,0000
- Air Flow Multi-Position
- Voltage 208/230 VAC
- Phase 3
- Circuit Breaker - Min Amps 25
- Circuit Breaker - Max Amps 35
- Minimum Circuit Amps 25
- Blower Motor HP 3/4 HP
- Blower Motor RPM 1075
- Blower Motor Speeds Variable
- Condenser Motor Type Direct Drive
- Condenser Motor HP 1/3 HP
- Condenser Motor RPM 1075
- Condenser Motor Speeds 1
- Rated Load Amps 13.1
- Locked Rotor Amps 83.1
- Drive Type Direct
- Compressor (1) Scroll
- Gas Connection 1/2" [12.7 mm] N.P.T.
- UL Listed Yes
- Nominal AFUE 81Nominal SEER 14Nominal EER 11Product Family RGEA14
Rheem RGEA14048ACT101AA
Item#:
RGEA14048ACT101AA
Manufacturer Item:
RGEA14048ACT101AA
Manufacturer:
FUJITSU(MINI-SPLITS)