|◀ 1909 - 1920 of 1931 ▶|
View:
Mortex H41-46-26-A1BC Air Handler Hot Water Hydronic 1-1/2-2 Ton 115 VAC
    Upflow, Horizontal (right to left)
  • Drain pans are manufactured of durable, non-corrosive plastic, and meet ASHRAE standards for IAQ. Pans are"dry" thus holding minimum water.
  • Drain pans have primary and secondary drains for either left or right hand connections.
  • Cabinet is heavy gauge embossed Gallonvanized steel substrate, with front and top panels pre-painted a durable neutral gray.
  • All units are equipped with factory installed time delay relay as standard.
  • All units have 1 foil faced insulation.
  • All units include a 1" throw away filter.
  • All electric heat units are 208/230/1/60 All hydronic heat units are 115/1/60.
  • Standard units with 12 KW electric heat or larger have a factory installed circuit breaker (UL Requirement). All units 10 KW and smaller may be ordered with or without the circuit breaker option.
  • All units are suitable for"0"" clearance to combustible materials.
  • Electric heat units are field convertible to downflow with factory conversion kit.
  • Blower assembly slides out for easy maintenance.
  • Refrigeration coil connections are swaged and then factory sealed with copper caps to maintain a nitrogen holding charge.
  • All hydronic units include a freeze protection switch.
  • All hydronic units include a compressor lockout switch.

    Mortex Products H41-46-26-A1BC

Item#:
H41-46-26-A1BC
Manufacturer Item:
H41-46-26-A1BC
Manufacturer:
MORTEX PRODUCTS, INC.


International Comfort Products NXH518GKP

Item#:
NXH518GKP
Manufacturer Item:
NXH518GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS


International Comfort Products NXH648GKP

Item#:
NXH648GKP
Manufacturer Item:
NXH648GKP
Manufacturer:
INTERNATIONAL COMFORT PRODUCTS
REFRIGERATION CIRCUIT
  • 2- stage scroll compressors on all models
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • Low pressure switch
  • Copper tube / aluminum fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
  • BUILT TO LAST
  • Baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

    International Comfort Products N4H624GKP

  • Item#:
    N4H624GKP
    Manufacturer Item:
    N4H624GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • Low pressure switch
  • Round tube / aluminum plate fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant BUILT TO LAST
  • Baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

    International Comfort Products N4H436GHP

  • Item#:
    N4H436GHP
    Manufacturer Item:
    N4H436GHP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    REFRIGERATION CIRCUIT
  • Scroll compressors on all models
  • Suction line accumulator factory installed
  • Bi- flow filter- drier included for field installation
  • Integrated solid state control with Time- Temperature Defrost
  • Low pressure switch
  • Round tube / aluminum plate fin coil EASY TO INSTALL AND SERVICE
  • Easy Access service valves on all models
  • External high and low refrigerant service ports
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant BUILT TO LAST
  • Baked- on powder coat finish over galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) grille spacing for extra protection

    International Comfort Products N4H418GKP

  • Item#:
    N4H418GKP
    Manufacturer Item:
    N4H418GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS

    • Scroll compressors on all models
    • Suction line accumulator factory installed
    • Integrated solid state control with TimeTemperature Defrost
    • High and Low pressure switches
    • Copper tube / aluminum fin coil
    • Easy Access service valves on all models
    • External high and low refrigerant service ports
    • Only two screws to access control panel
    • Factory charged with R410A refrigerant
    • Painted cabinet finish over Gallonvanized steel
    • Coated inlet grille with 3/8 spacing standard (hail guard)
    • 5 year compressor limited warranty Use of the AHRI Certified TM Mark indicates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .
    • 5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limited warranty (including compressor and coil) * For owner occupied, residential applications only. See warranty certificate for complete details and restrictions, including warranty coverage for other applications
    Item#:
    R4H418GKP
    Manufacturer Item:
    R4H418GKP
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Copeland Scroll Ultratecht compressors on all models
  • Filter- drier supplied with every unit for field installation
  • External high and low refrigerant service ports
  • High and low pressure switches
  • Copper tube / aluminum fin coil
  • Self- configuring installation capabilities when used with Observes Wall Control
  • Outdoor temperature sensor factory installed (for use with Observer Wall Control only)
  • Ball Bearing PSC fan motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
  • Text based diagnostics with Observer Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
  • High gloss, baked- on powder coat finish over Galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style
  • 10 year No Hassle Replacementt limited warranty 5 year parts limited warranty (including compressor and coil) With timely registration, an additional 5 year parts limited warranty (including compressor and coil) This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However, proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerant charging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org . * Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details.

    Tempstar TCH636GK

  • Item#:
    TCH636GK
    Manufacturer Item:
    TCH636GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil
  • Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets
  • Text based diagnostics with Observer Communicating Wall Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • High gloss, bakedon powder coat finish over Gallonvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style
  • 5 year No Hassle Replacement limited warranty
  • 5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC
  • This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details

    Tempstar TSH648GKA

  • Item#:
    TSH648GKA
    Manufacturer Item:
    TSH648GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil
  • Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets
  • Text based diagnostics with Observer Communicating Wall Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • High gloss, bakedon powder coat finish over Gallonvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style
  • 5 year No Hassle Replacement limited warranty
  • 5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC
  • This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details

    Century Brass W46-3

  • Item#:
    TSH636GKA
    Manufacturer Item:
    TSH636GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Copeland Scroll Ultratecht compressors on all models
  • Filter- drier supplied with every unit for field installation
  • External high and low refrigerant service ports
  • High and low pressure switches
  • Copper tube / aluminum fin coil
  • Self- configuring installation capabilities when used with Observes Wall Control
  • Outdoor temperature sensor factory installed (for use with Observer Wall Control only)
  • Ball Bearing PSC fan motors on all models
  • High performance compressor sound shield standard
  • Isolation compressor grommets
  • Text based diagnostics with Observer Wall Control
  • Only 2 control wires required from communicating indoor unit to condenser
  • Easy access service valves on all models
  • Innovative control box design
  • Only two screws to access control panel
  • Factory charged with R- 410A refrigerant
  • High gloss, baked- on powder coat finish over Galvanized steel
  • Post- painted (black) coil fins
  • Coated, weather- resistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style
  • 10 year No Hassle Replacementt limited warranty 5 year parts limited warranty (including compressor and coil) With timely registration, an additional 5 year parts limited warranty (including compressor and coil) This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However, proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerant charging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates a manufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org . * Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details.

    Tempstar TCH624GK

  • Item#:
    TCH624GK
    Manufacturer Item:
    TCH624GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Copeland Scroll compressors on all models
  • Suction line accumulator factory installed
  • Biflow filterdrier included for field installation
  • Integrated solid state control with TimeTemperature Defrost
  • External high and low refrigerant service ports
  • Copper tube / aluminum fin coil
  • Communicating, selfconfiguring operation when used with observer Wall Control (TSTAT0101SC)
  • Outdoor temperature sensor factory installed
  • Compressor sound blanket standard
  • Isolation compressor grommets
  • Text based diagnostics with Observer Communicating Wall Control
  • Easy access service valves on all models
  • Innovative control box design
  • High and low pressure switches
  • Only two screws to access control panel
  • Factory charged with R410A refrigerant
  • High gloss, bakedon powder coat finish over Gallonvanized steel
  • Postpainted (black) coil fins
  • Coated, weatherresistant cabinet screws
  • Coated inlet grille with 3/8 (10mm) spacing for extra protection
  • Corner posts for extra strength and style
  • 5 year No Hassle Replacement limited warranty
  • 5 year parts limited warranty (including compressor and coil)  With timely registration, an additional 5 year parts limitedwarranty (including compressor and coil) TSTAT0101SC
  • This product has been designed and manufactured to meet ENERGY STAR criteria for energy efficiency when matched with appropriate coil components. However,proper refrigerant charge and proper air flow are critical to achieve rated capacity and efficiency. Installation of this product should follow the manufacturers refrigerantcharging and air flow instructions. Failure to confirm proper charge and airflow may reduce energy efficiency and shorten equipment life. Use of the AHRI Certified TM Mark indicates amanufacturers participation in the program. For verification of certification for individual products, go to www.ahridirectory.org .* Applies to original purchaser/homeowner, some limitations may apply. See Warranty certificate for complete details

    Tempstar TSH642GKA

  • Item#:
    TSH642GKA
    Manufacturer Item:
    TSH642GKA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 1909 - 1920 of 1931 ▶|
    View: