|◀ 157 - 168 of 1555 ▶|
View:
Features
  • Horizontal application only
  • Accessory field-installed electric heat kits available in 3, 5, 6, 7.5, or 10 kW
  • 40 VA 208/230-1-60 supply voltage
  • All Models use R-410A TXV metering device
  • All Aluminum coils
  • Adjustable condensate drainpan
  • FMC4X & FMC4Z
  • Horizontal return applications require field fabricated bottom cover or solid access panel accessory kit
  • Cabinets meet the requirement of 1.4% cabinet leakage rate when texted to ASHRAE Standard 193
  • Cabinets constructed to prevent cabinet sweating
  • Refrigerant lines and electrical connections can be run out the back or side of casing
  • PSC motor on all FMU4X & FMC4X models
  • ECM motor on all FMU4Z & FMC4Z models
  • Easy to Install and Service
  • A-coil design for maximum surface area
  • Multiple electrical, refrigerant lineset and drain line entry for application flexibilty Primary and secondary drain connections exit from the back or side of the cabinet.
  • Supports furred-down ceiling open return and ducted return applications
  • Sweat connections for long term reliability
  • Grooved aluminum tube / aluminum fin coils on FMU4X &
  • FMC4X models with "AL" in the 10th and 11th position of model number
  • Item#:
    FMC4Z1800AL
    Manufacturer Item:
    FMC4Z1800AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Efficiency
  • 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
  • (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available
  • Sound
  • Sound levels as low as 69 dBA with accessory sound blanket
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability
  • Item#:
    N4H5S24AKAAA
    Manufacturer Item:
    N4H5S24AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Efficiency
  • 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2  13.0 EER2 (11.2 - 13.0 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the ozone
  • layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard

    International Comfort Products N4A5S42AKAWA

  • Item#:
    N4A5S42AKAWA
    Manufacturer Item:
    N4A5S42AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Efficiency
  • 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
  • (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available
  • Sound
  • Sound levels as low as 69 dBA with accessory sound blanket
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability
  • Item#:
    N4H5S18CKAAA
    Manufacturer Item:
    N4H5S18CKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection

    International Comfort Products Commercial RGV048HFFA0AAA

  • Item#:
    RGV048HFFA0AAA
    Manufacturer Item:
    RGV048HFFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Efficiency
  • 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2  13.0 EER2 (11.2 - 13.0 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the ozone
  • layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
  • Item#:
    N4A5S36CKAWA
    Manufacturer Item:
    N4A5S36CKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • 11/2, 2, 21/2, and 3 Tons

    Upflow application only

    Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW

    208/230160 supply voltage

    Cabinet exterior is galvanized sheet metal

    Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

    Insulated for conditioned space (not to be installed in unconditioned spaces)

    All Aluminum coils

    FMA4P

    For use with R410A refrigerant utilizing standard piston

    FMA4X

    R410A refrigerant, TXV standard

    PERFORMANCE

    PSC motor on all FMA4P

    ECM motor on all FMA4X

    Motor suspended on rubber grommets for quieter operation

    Fresh air intake knockouts in cabinet

    EASY TO INSTALL AND SERVICE

    Units fits between standard stud spacings

    All service access is located in the front

    Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet

    No returnair ductwork required in specific applications

    Wall hanging brackets included with the unit


    International Comfort Products FMA4X3600AL

  • Item#:
    FMA4X3600AL
    Manufacturer Item:
    FMA4X3600AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Efficiency
  • 14.3 - 15.2 SEER2 / 11.0 - 12.5 EER2 / 7.5 - 8.1 HSPF2
  • (depending on unit size and indoor combination installed)
  • Indoor air quality accessories available
  • Sound
  • Sound levels as low as 69 dBA with accessory sound blanket
  • Comfort
  • System supports programmable or standard thermostat controls
  • Reliability
  • Non-ozone depleting refrigerant
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Loss of charge switch
  • Filter drier
  • Balanced refrigeration system for maximum reliability
  • Item#:
    N4H5S18AKAAA
    Manufacturer Item:
    N4H5S18AKAAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Efficiency
  • 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2  13.0 EER2 (11.2 - 13.0 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the ozone
  • layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
  • Item#:
    N4A5S36AKAWA
    Manufacturer Item:
    N4A5S36AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • 11/2, 2, 21/2, and 3 Tons

    Upflow application only

    Accessory fieldinstalled electric heat kits available in 5, 7.5, or 10 kW

    208/230160 supply voltage

    Cabinet exterior is galvanized sheet metal

    Cabinet air leakage rate below 1.4% when tested to ASHRAE Standard 193

    Insulated for conditioned space (not to be installed in unconditioned spaces)

    All Aluminum coils

    FMA4P

    For use with R410A refrigerant utilizing standard piston

    FMA4X

    R410A refrigerant, TXV standard

    PERFORMANCE

    PSC motor on all FMA4P

    ECM motor on all FMA4X

    Motor suspended on rubber grommets for quieter operation

    Fresh air intake knockouts in cabinet

    EASY TO INSTALL AND SERVICE

    Units fits between standard stud spacings

    All service access is located in the front

    Primary and secondary drain connections exit from the bottom, access panel in bottom of cabinet

    No returnair ductwork required in specific applications

    Wall hanging brackets included with the unit

  • Item#:
    FMA4X3000AL
    Manufacturer Item:
    FMA4X3000AL
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Efficiency
  • 13.8 - 16.0 SEER2 (14 - 16.5 SEER) / 11.2  13.0 EER2 (11.2 - 13.0 EER)
  • Indoor air quality accessories available
  • Reliability
  • R-410A refrigerant - environmentally sound, wont deplete the ozone
  • layer and low lifetime service cost.
  • Scroll compressor
  • Internal pressure relief valve
  • Internal thermal overload
  • Filter drier
  • Durability
  • Protection Package:
  • Solid, durable sheet metal construction
  • Dense wire coil guard
  • Item#:
    N4A5S30AKAWA
    Manufacturer Item:
    N4A5S30AKAWA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Patent pending, the industrys first beltless direct-drive vane axial fan for rooftop units with electric commutated variable speed motor.
  • Reliable fixed speed scroll compressor on 3-5 ton sizes and 2 stage scroll technology on 6 ton sizes.
  • Upgraded unit control board with intuitive indoor fan adjustment.
  • Reliable copper tube / aluminum fin condenser coil with 5/16-in. tubing to help reduce refrigerant charge versus prior designs.
  • New outdoor fan system with rugged  lightweight high impact composite fan blade.
  • Installation ease.
  • Easy to maintain.
  • Easy to use.
  • X-Vane Fan Technology.
  • Single-stage units deliver SEERs up to 14.0 and EERs up to 11.8. Two-stage units deliver IEERs up to 15.2 and EERs up to 11.2
  • All models are capable of either vertical or horizontal airflow.
  • RGV/RAV rooftop units (RTU) were designed by customers for customers. With no-strip screw collars, handled access panels, and more the unit is easy to install, easy to maintain, and easy to use. Your new 3 to 6 ton RGV/RAV rooftop unit (RTU) provides optimum comfort and control from a packaged rooftop.
  • Optional Hot Gas Re-Heat dehumidification system for improved part load humidity performance.
  • R-410A refrigerant.
  • Single point gas and electrical connections.
  • 3 to 5 ton models use fixed refrigerant metering devices and 6 ton models use a TXV.
  • Scroll compressors with internal line-break overload protection
  • Item#:
    RGV048HEFA0AAA
    Manufacturer Item:
    RGV048HEFA0AAA
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 157 - 168 of 1555 ▶|
    View: