Error

Error:

Javascript is disabled in this browser. This page requires Javascript. Modify your browser's settings to allow Javascript to execute. See your browser's documentation for specific instructions.

Home > A/C Equipment

Room BTU Calculator

Room BTU Calculator

Select the room conditions to determine the required BTU.

Room Size (Square Feet)

Number of People

Ceiling Height (Feet)

Floor

BTU Result

|◀ ◀ 1453 - 1464 of 1630 ▶ ▶|

View:

FHX072H2AA0AUA

Air Handler Commercial Heat Pump 6 Ton 208/230/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FHX072H2AA0AUA

Item#:

FHX072H2AA0AUA

Manufacturer Item:

FHX072H2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX072H2AA0AUA_Spec

FHS091LAAA2A0A

Air Handler Heat Pump 7-1/2 Ton 460/3 R410A Horizontal Multi-Position and Vertical 56-1/16 H x 49 W x 28-3/16 L

Multiposition design for horizontal or vertical installation without modification

Two sloped condensate pans on each unit for horizontal or vertical applications

Standard sloped drain pans and cleanable insulation treated with Environmental Protection Agency (EPA) registered antimicrobial agent improves indoor air quality

High-static design meets a wide range of applications than competitive package air handler lines

Economizer accessory provides ventilations air and free cooling

Single refrigerant circuit on 072 and 091 sizes. Dual refrigerant circuit on 120 to 240 sizes. Dual circuit can be field modified for use on single circuit condensers

Single blower on 072 to 120 sizes, dual blower on FHS180 & 240 sizes

Optional 2speed indoor fan with VFD controller 072 to 240 ton sizes

High efficiency copper tube / aluminum coils

Standard factoryinstalled thermostatic expansion valve (TXV) with removable power element

Easy maintenance removal of single panel allows access to virtually all components

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available

24volt terminal block for control wiring connection.

Hot water coil, steam coil, and electric heat accessories are available.

International Comfort Products FHS091LAAA2A0A

Item#:

FHS091LAAA2A0A

Manufacturer Item:

FHS091LAAA2A0A

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHS091LAAA2A0A_Spec

FHX120L2AA0AUA

Air Handler Commercial Heat Pump 10 Ton 460/3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FHX120L2AA0AUA

Item#:

FHX120L2AA0AUA

Manufacturer Item:

FHX120L2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX120L2AA0AUA_Spec

FHX091L2AA0AUA

Air Handler Commercial Heat Pump 7-1/2 Ton 460 /3 2-Speed Unpainted 56-1/16 H x 49 W x 28-3/16 L

Multi-position design for horizontal or vertical installation without modification.

Standard sloped drain pans and cleanable insulation treated with an immobilized anti-microbial agent to inhibit the growth of bacteria and fungi on the insulation.

High-static design meets a wider range of applications than competitive packaged air handler lines.

Ultra Low Leak Economizer accessory provides ventilation air and free cooling with built in Fault Detection and Diagnostic (FDD) capabilities.

Cooling coils with mechanically bonded fins provide peak heat transfer.

Hot water coil, steam coil, and electric heat accessories are available.

Standard factory-installed thermo-static expansion valves (TXV) with removable power element on FAX/FAS units.

Die-formed galvanized steel casings provide durability and structural integrity. Optional paint is available.

Upgraded unit control board with intuitive indoor fan adjustment.

Standard 2-Speed Indoor Fan Motor system.

International Comfort Products FHX091L2AA0AUA

Item#:

FHX091L2AA0AUA

Manufacturer Item:

FHX091L2AA0AUA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

FHX091L2AA0AUA_Spec

Tempstar Heat Pump Condensing Unit 1-Stage 4 Ton

REFRIGERATION CIRCUIT

Copeland Scroll compressors on select models

Suction line accumulator factory installed

Bi- flow filter- drier included for field installation

Integrated solid state control with Time- Temperature Defrost

External high and low refrigerant service ports

Copper tube / aluminum fin coil PERFORMANCE

Communicating, self- configuring operation when used with Observer Wall Control (TSTAT0201CW)

Outdoor temperature sensor factory installed

Compressor sound blanket standard

Isolation compressor grommets EASY TO INSTALL AND SERVICE

Text based diagnostics with Observer Communicating Wall Control

Easy access service valves on all models

Innovative control box design

High and low pressure switches

Only two screws to access control panel

Factory charged with R- 410A refrigerant BUILT TO LAST

High gloss, baked- on powder coat finish over galvanized steel

Post- painted (black) coil fins

Coated, weather- resistant cabinet screws

Coated inlet grille with 3/8 (10mm) spacing for extra protection

Corner posts for extra strength and style

International Comfort Products TSH448GKA

Item#:

TSH448GKA

Manufacturer Item:

TSH448GKA

Manufacturer:

INTERNATIONAL COMFORT PRODUCTS

BMAC3036CBTA

Evaporator Coil Cased Multipoise 3 Ton Alumium 21" R454B

Foil-faced insulation for easy cleaning

Formicary corrosionresistant all Aluminum coil for longevity

Factory installed TXV

Vertical, downflow, and horizontal application

UVC-tested plastic drain pan reduces mold, bacteria and airborne pollutants

Slide-out coil offers easy maintenance, And can also be converted for uncased coil application

10-year parts limited warran

Bosch BMAC3036CBTA

Item#:

BMAC3036CBTA

Manufacturer Item:

8-733-965-427

Manufacturer:

BOSCH THERMOTECHNOLOGY CORP

BMAC3036BBTA

Evaporator Coil Cased Multipoise 3 Ton Alumium 17-1/2" R454B

Foil-faced insulation for easy cleaning

Formicary corrosionresistant all Aluminum coil for longevity

Factory installed TXV

Vertical, downflow, and horizontal application

UVC-tested plastic drain pan reduces mold, bacteria and airborne pollutants

Slide-out coil offers easy maintenance, And can also be converted for uncased coil application

10-year parts limited warran

Bosch BMAC3036BBTA

Item#:

BMAC3036BBTA

Manufacturer Item:

8-733-965-426A

Manufacturer:

BOSCH THERMOTECHNOLOGY CORP

BWA-30WN1-M16

Air Handler Wall Mount 2.5 Ton 16 SEER 208/230/1 ECM Motor 22" W x 39-1/2" H x 19" D

Bosch BWA-30WN1-M16 Air Handler Wall Mount 2.5 Ton 230/1 16 SEER

A versatile wall-mounted air handler paired with an inverter condenser to create a space saving comfort solution.

This system combines the BOVA15 outdoor unit with our BWA16 constant torque air handler.,
,

Bosch BWA-30WN1-M16

Item#:

BWA-30WN1-M16

Manufacturer Item:

8-733-958-525

Manufacturer:

BOSCH THERMOTECHNOLOGY CORP

BWA-30WN1-M16-Warranty_Misc

BWA-30WN1-M16_Install

BWA-36WN1-M16

Air Handler Wall Mount 3 Ton 16 SEER 208/230/1 ECM Motor 22" W x 39-1/2" H x 19" D

Bosch BWA-36WN1-M16 Air Handler Wall Mount 3 Ton 230/1 16 SEER

A versatile wall-mounted air handler paired with an inverter condenser to create a space saving comfort solution.

This system combines the BOVA15 outdoor unit with our BWA16 constant torque air handler.,

Bosch BWA-36WN1-M16

Item#:

BWA-36WN1-M16

Manufacturer Item:

8-733-958-526

Manufacturer:

BOSCH THERMOTECHNOLOGY CORP

BWA-36WN1-M16-Warranty_Misc

BWA-36WN1-M16_Install

BWA-18WN1-M16

Air Handler Wall Mount 1.5 Ton 16 SEER 208/230/1 ECM Motor 20-1/2" W x 36-1/2" H x 15" D

Bosch BWA-18WN1-M16 Air Handler Wall Mount 1.5 Ton 230/1 16 SEER

A versatile wall-mounted air handler paired with an inverter condenser to create a space saving comfort solution.

This system combines the BOVA15 outdoor unit with our BWA16 constant torque air handler.,
,

Bosch BWA-18WN1-M16

Item#:

BWA-18WN1-M16

Manufacturer Item:

8-733-958-523

Manufacturer:

BOSCH THERMOTECHNOLOGY CORP

BWA-18WN1-M16-Warranty_Misc

BWA-18WN1-M16_Install

BWA-24WN1-M16

Air Handler Wall Mount 2 Ton 16 SEER 208/230/1 ECM Motor 20-1/2" W x 36-1/2" H x 15" D

Bosch BWA-24WN1-M16 Air Handler Wall Mount 2 Ton 230/1 16 SEER

A versatile wall-mounted air handler paired with an inverter condenser to create a space saving comfort solution.

This system combines the BOVA15 outdoor unit with our BWA16 constant torque air handler

Bosch BWA-24WN1-M16

Item#:

BWA-24WN1-M16

Manufacturer Item:

8-733-958-524

Manufacturer:

BOSCH THERMOTECHNOLOGY CORP

BWA-24WN1-M16-Warranty_Misc

BWA-24WN1-M16_Install

CA36A2G-16L-00

Item#:

CA36A2G-16L-00

Aspen-Evaporator_Spec

|◀ ◀ 1453 - 1464 of 1630 ▶ ▶|

View:

Complementary Content

${loading}