S2K Commerce - Products Dropdown
Actions
S2K Commerce - Shopping Cart
Actions
S2K Commerce - Order Entry
Actions
Brand Name
Type
Pipe Size
Connection Type
Voltage
Honeywell V843 2-Way Low VAC age Zone Valve, 1", C, 125 psi, 3.5 Cv, 24 VAC
,
,
HONEYWELL B163-2
Honeywell V8043F1036/U Brass 2-Way/2-Position Normally Closed Low VAC age Straight-Through Zone Valve, 3/4", Sweat
,
- 2-way on-off low VAC age valves consist of an actuator and valve assembly for controlling the flow of hot water
- Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
- All model may be installed without disassembling the valve
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
- 15 sec nominal open timing
- Screw terminal block electric connection
- Spring return to close valve action
- No SPST auxiliary end switch
- 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
- Buna-N (NBR) rubber plug
- Manual opener
,
HONEYWELL B163-5
Item#:
B163-5
Manufacturer Item:
V8043F1036
Manufacturer:
HONEYWELL
Taco Z075T2-3 2-Way Zone Valve 24 VAC 3/4" FPT,
,
,
Taco Z075T2-3
Erie PopTop VT2317G13A01A Forged Brass 2-Way 2-Position Normally Closed General Temperature Zone Valve Assembly, 3/4", Sweat
,
- Valve bodies and actuators provide easy installation for a variety of heating and cooling applications
- Valves actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler
- Direct replacement for all existing 2-position pop-top applications
- Hysteresis synchronous motor for long life
- Spring return operation provides a fail-safe
- Actuator mounts directly onto valve body without need for linkages or calibration
- Manual override lever
- Actuator can be replaced without any tools or removal of valve from system
- Quicker installation time and easier maintenance
- Factory assembled valve and actuator combinations
- The valves can be mounted in horizontal or vertical piping
- Terminal block with end switch electrical connection
- Spring return normally close action
- Buna-N paddle
- 24 - 240 VAC at 101 milli-amp minimum to 5 amp maximum and 9 - 30 VDC at 100 milli-amp maximum end switch
- Stainless steel base plate, aluminum cover actuator
,
Erie B163-17
Item#:
B163-17
Manufacturer Item:
VT2317G13A01A
Manufacturer:
SCHNEIDER ELECTRIC
Erie PopTop VT2313G13A02A Forged Brass 2-Way 2-Position Normally Closed General Temperature Zone Valve Assembly, 3/4", Sweat
,
- Valve bodies and actuators provide easy installation for a variety of heating and cooling applications
- Valves actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler
- Direct replacement for all existing 2-position pop-top applications
- Hysteresis synchronous motor for long life
- Spring return operation provides a fail-safe
- Actuator mounts directly onto valve body without need for linkages or calibration
- Manual override lever
- Actuator can be replaced without any tools or removal of valve from system
- Quicker installation time and easier maintenance
- Factory assembled valve and actuator combinations
- The valves can be mounted in horizontal or vertical piping
- 18" standard wire lead electrical connection
- Spring return normally close action
- Buna-N paddle
- 24 - 240 VAC at 101 milli-amp minimum to 5 amp maximum and 9 - 30 VDC at 100 milli-amp maximum end switch
- Stainless steel base plate, aluminum cover actuator
,
Erie B163-20
Item#:
B163-20
Manufacturer Item:
VT2313G13A02A
Manufacturer:
SCHNEIDER ELECTRIC
Erie PopTop VT2417G13A02A Forged Brass 2-Way Normally Closed Zone Valve Assembly, 1", Sweat
,
- Valve bodies and actuators provide easy installation for a variety of heating and cooling applications
- Valves actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler
- Direct replacement for all existing 2-position poptop applications
- Hysteresis synchronous motor for long life
- Spring return operation provides a fail-safe
- Actuator mounts directly onto valve body without need for linkages or calibration
- Manual override lever
- Actuator can be replaced without any tools or removal of valve from system
- Quicker installation time and easier maintenance
- Factory assembled valve and actuator combinations
- 18" standard lead wire
- 24 - 240 VAC at 101 milli-amp minimum to 5 amp maximum and 9 - 30 VDC at 100 milli-amp maximum end switch
- Buna-N paddle
- General close-off actuator
- Nickel-plated stem
,
Erie B163-23
Item#:
B163-23
Manufacturer Item:
VT2417G13A02A
Manufacturer:
SCHNEIDER ELECTRIC
Erie PopTop VT2343G13A02A0F Forged Brass 2-Way Normally Closed Zone Valve Assembly, 3/4", Inverted Flare
,
- Valve bodies and actuators provide easy installation for a variety of heating and cooling applications
- Valves actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler
- Direct replacement for all existing 2-position poptop applications
- Hysteresis synchronous motor for long life
- Spring return operation provides a fail-safe
- Actuator mounts directly onto valve body without need for linkages or calibration
- Manual override lever
- Actuator can be replaced without any tools or removal of valve from system
- Quicker installation time and easier maintenance
- Factory assembled valve and actuator combinations
- 18" standard lead wire
- 24 - 240 VAC at 101 milli-amp minimum to 5 amp maximum and 9 - 30 VDC at 100 milli-amp maximum end switch
- Buna-N paddle
- General close-off actuator
- Nickel-plated stem
,
Erie B163-27
Item#:
B163-27
Manufacturer Item:
VT2343G13A02A0F
Manufacturer:
SCHNEIDER ELECTRIC
Erie PopTop VT2317G13A02A Forged Brass 2-Way Normally Closed Zone Valve Assembly, 3/4", Sweat
,
- Valve bodies and actuators provide easy installation for a variety of heating and cooling applications
- Valves actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler
- Direct replacement for all existing 2-position poptop applications
- Hysteresis synchronous motor for long life
- Spring return operation provides a fail-safe
- Actuator mounts directly onto valve body without need for linkages or calibration
- Manual override lever
- Actuator can be replaced without any tools or removal of valve from system
- Quicker installation time and easier maintenance
- Factory assembled valve and actuator combinations
- 18" standard lead wire
- 24 - 240 VAC at 101 milli-amp minimum to 5 amp maximum and 9 - 30 VDC at 100 milli-amp maximum end switch
- Buna-N paddle
- General close-off actuator
- Nickel-plated stem
,
Erie B163-22
Item#:
B163-22
Manufacturer Item:
VT2317G13A02A
Manufacturer:
SCHNEIDER ELECTRIC
Automag RI34-14UR Zone Valve 3/4"
- ,
,
Automag RI34-14UR
Item#:
RI34-14UR
Manufacturer Item:
RI34-14UR
Manufacturer:
KCI INDUSTRIES,INC.
Honeywell V843 2-Way Low VAC age Zone Valve, 3/4", C, 125 psi, 3.5 Cv, 24 VAC
,
,
HONEYWELL B163-1
Honeywell Home V8043E1145/U Brass 2-Way 2-Position Normally Closed Low VAC age Straight-Through Motorized Zone Valve, 3/4 Inch, NPT
,
- 2-way on-off low VAC age valves consist of an actuator and valve assembly for controlling the flow of hot water
- Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
- All model may be installed without disassembling the valve
- Compact construction for easy installation
- Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
- Actuator motor may be replaced without removing the valve body or draining the system
- The valve can be mounted in any position on a vertical line
- Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
- 15 sec nominal open timing
- 18" standard wire lead electrical connection
- Spring return to close valve action
- No SPST auxiliary end switch
- 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
- Buna-N (NBR) rubber plug
- Brass case, sector gears, stainless steel cover actuator
,
HONEYWELL V8043E1145
Item#:
V8043E1145
Manufacturer Item:
V8043E1145
Manufacturer:
HONEYWELL
18" wire lead connection
A snap on actuator allows for fast installation and easy replacement with a convenient in-line push button.
A gear ratio of 21:1 in the actuator increases torque for high close-off pressure and increases closing time to reduce water hammer.
Compact design provides quick and easy installation, the Z-one valve fits perfectly inside baseboards and fan coils. Available with choice of NPT, sweat and press fittings for ease of installation and maintenance.
Hermetically sealed end switch in 24V actuators requires no minimum current load allowing multiple end switches connected in parallel to zoning panel.
Suitable for all types of systems - made with materials compatible with chilled or hot water up to 240°F, 15 psi steam, and open or closed systems.
Low power consumption allows up to five valves per 40 VA transformer.
Z55
Item#:
Z55
Manufacturer Item:
Z55
Manufacturer:
CALEFFI NORTH AMERICA, INC.