White Rodgers Cooling Controls 1311-102 Stainless Steel 3-Way 3-Wire Normally Closed Hydronic Zone Control Valve, 3/4", Sweat

Quiet operation
• Stainless steel valve stem
• Automatic recycling manual operator shows valve position at all times
• Built-in auxiliary contacts to control burner or circulator relay
• Motor can be removed from valve assembly without draining system
• 45 sec open and close time cycle
• 2-1/2 feet of tubing friction loss equivalent
• Includes screw terminal wiring panel and auxiliary switch
• 2 amp at 24 VAC electric rating of auxiliary switch
• 0.4 amp at 24 VAC thermostat circuit rating

Sid Harvey Item #:B163-106: Replaces Part #:'s : 24217,

White Rodgers B163-106

White Rodgers B163-106

Erie PopTop VT2313G13A02A Forged Brass 2-Way 2-Position Normally Closed General Temperature Zone Valve Assembly, 3/4", Sweat

Valve bodies and actuators provide easy installation for a variety of heating and cooling applications
• Valves actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler
• Direct replacement for all existing 2-position pop-top applications
• Hysteresis synchronous motor for long life
• Spring return operation provides a fail-safe
• Actuator mounts directly onto valve body without need for linkages or calibration
• Manual override lever
• Actuator can be replaced without any tools or removal of valve from system
• Quicker installation time and easier maintenance
• Factory assembled valve and actuator combinations
• The valves can be mounted in horizontal or vertical piping
• 18" standard wire lead electrical connection
• Spring return normally close action
• Buna-N paddle
• 24 - 240 VAC at 101 milli-amp minimum to 5 amp maximum and 9 - 30 VDC at 100 milli-amp maximum end switch
• Stainless steel base plate, aluminum cover actuator
  

  Erie B163-20

White Rodgers Cooling Controls F19-0104 2-Wire Motor Assembly for 2-Wire Zone Valves 1361-102, -103, -104

White Rodgers B163-113

Erie PopTop VT2343G13A02A0F Forged Brass 2-Way Normally Closed Zone Valve Assembly, 3/4", Inverted Flare

Valve bodies and actuators provide easy installation for a variety of heating and cooling applications
• Valves actuator can be installed after valve body has been installed onto fan coil, baseboard or air handler
• Direct replacement for all existing 2-position poptop applications
• Hysteresis synchronous motor for long life
• Spring return operation provides a fail-safe
• Actuator mounts directly onto valve body without need for linkages or calibration
• Manual override lever
• Actuator can be replaced without any tools or removal of valve from system
• Quicker installation time and easier maintenance
• Factory assembled valve and actuator combinations
• 18" standard lead wire
• 24 - 240 VAC at 101 milli-amp minimum to 5 amp maximum and 9 - 30 VDC at 100 milli-amp maximum end switch
• Buna-N paddle
• General close-off actuator
• Nickel-plated stem
  

  Erie B163-27

Taco heat motor zone valves provide a convenient way to create individual zones or equipment isolation in a hydronic heating system. Utilizing one pump along with multiple zone valves, flow can be started, stopped, or diverted through the system to provide individual room or area comfort control and energy savings. Taco offers many versions and sizes of the heat motor zone valve to meet all your zone valve needs.

Proven performance
• Rugged dependability
• Silent operation
• Twist off head
• Bellows or globe valve construction ensures positive shut-off and leak proof operation
• Patented construction
• Easy to install
• Manual open bypass lever
• 24 VAC powered with isolated end switch
• 100% factory tested
• Made in USA
• 3-year head, 5-year body warranty on the 570 series

Sid Harvey Item #:B163-77: Replaces Part #:'s : B163-2 | B163-2R | ZVA301-B163-77

Taco B163-77

Honeywell 40003916-048 Replacement Power Head with End Switch for V Series V8043F 2-Way Zone Valves

Valves with action of spring return to close
• 4.4 amp running at 120 VAC , 50 VA pilot duty at 24 VAC auxiliary switch
  

  HONEYWELL B163-7

Sid Harvey 30-17A Zone Valve Motor, 24 VAC

Sid Harvey B163-10

Honeywell V8043E1004/U Brass 2-Way 2-Position Normally Closed Low Voltage Straight-Thru Zone Valve, 1/2", Sweat

On-off low Voltage valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All models may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec open time
• 18" lead electric connection
• Spring return to close valve action
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• NO SPST auxillary end switch
• Buna-N (NBR) rubber ball plug/ball/disc material
• EPDM rubber packing material
• Mounted in any position on a vertical line
  

  HONEYWELL B163

Honeywell V843 2-Way Low Voltage Zone Valve, 3/4", C, 125 psi, 3.5 Cv, 24 VAC

HONEYWELL B163-1

Sid Harvey B163-11 Replacement Zone Valve Motor

Sid Harvey B163-11

Honeywell V8043F1036/U Brass 2-Way/2-Position Normally Closed Low Voltage Straight-Through Zone Valve, 3/4", Sweat

2-way on-off low Voltage valves consist of an actuator and valve assembly for controlling the flow of hot water
• Manual opener for valve operation on power failure, valve returns to automatic position when power is restored
• All model may be installed without disassembling the valve
• Compact construction for easy installation
• Complete powerhead may be removed or replaced without breaking plumbing line connections or draining the system
• Actuator motor may be replaced without removing the valve body or draining the system
• Use this valve in closed loop hydronic systems that do not contain dissolved oxygen in system water, such as fresh water from frequent source of makeup water
• 15 sec nominal open timing
• Screw terminal block electric connection
• Spring return to close valve action
• No SPST auxiliary end switch
• 50 VA pilot duty at 24 VAC , 4.4 amp running with 26.4 amp inrush at 120 VAC end switch rating
• Buna-N (NBR) rubber plug
• Manual opener
  

  HONEYWELL B163-5

White Rodgers Cooling Controls F19-0097 3-Wire Motor Assembly for 3-Wire Zone Valves 1311-102, -103, -104

White Rodgers B163-112