Mitco R80-100-1

Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Enclosed safety switch with external reset butTon
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• Replacement for popular competitive models
• 44.4 amp at 120 VAC/22.2 amp at 240 VAC (contacts - locked rotor)
• Direct replacement for Honeywell R8184G1161/R8184G1294/R8184G4066 Replaces Part #:'s : R8184G1161 | R8184G1294 |
  

  ICM Controls ICM1501

Intermittent ignition oil primary control with 30 sec safety timing, replacement for Honeywell R8184G Series
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Enclosed safety switch with external reset butTon
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• Replacement for popular competitive models
  

  ICM Controls ICM1502

Intermittent ignition oil primary control with 45 sec safety timing, replacement for Honeywell R8184G Series
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Enclosed safety switch with external reset butTon
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• Replacement for popular competitive models
  

  icm controls icm1503

Interrupted duty ignition
• Recycle on flame failure
• Serviceman reset protection (latch-up after 3-consecutive lockouts)
• Diagnostic LED
• 15 sec trial for ignition (TFI) other timings available
• 1.3 sec flame failure response time (FFRT)
• Alarm contacts
• Thermostat/aquastat compatible
• SMC (safety monitoring circuit) technology
  

  carlin parts r77-40

Resideo R7284B1024

Interrupted duty ignition
• 15 sec trial for Ignition 40200 (1.3 sec flame failure response time (FFRT))
• Recycle on flame failure
• Thermostat/aquastat compatible
• SMC (safety monitoring circuit) technology
  

  carlin parts r77-10

Interrupted duty ignition for high efficiency
• SMC technology for safety monitoring
• LED indicators, alarm contacts and pump prime for economic as well as efficient performance
• Serviceman reset protection ( latch-up after three consecutive lockouts)
• 15 sec trial for ignition (TFI) other timings available
• It offers recycle on flame failure and 1.3 sec flame failure response time
• Oil primary control has a input voltage rating of 120 VAC, input frequency rating of 60 Hz and input power rating of 9 VA
• It has a temperature rating of 32 - 140 deg F, resistive rating of 1500 ohm and safety switch timing of 15 sec
• Primary control offers serviceman reset protection and valve delay on/motor delay off feature
• It has a motor load of 10 FLA/60 LRA, ignitor load of 120 VAC at 60 Hz and valve load of 120 VAC at 60 Hz
• 500 VA motor load
• 24 VAC/VDC, 2 amp alarm contacts
• Flame signal test jack

carlin parts r77-41

Resideo R7284U1004

Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Remote lockout indication
• Enclosed safety switch with external reset button
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• With 15 sec safety timing, alarm outputs and manual safety switch

honeywell r75-40

Provides automatic, non-recycling control of an intermittent ignition oil burner system
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• LED on terminal strip indicates system lockout
• Remote lockout indication
• Enclosed safety switch with external reset button
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box (select models may be mounted directly on burner housing)
• C554A cadmium sulfide flame detector and 24 volts thermostat required
• 15 second safety timing, alarm outputs, and manual safety switch
• Intermittent ignition timing
  

  honeywell r75-37

With 45 sec safety timing and alarm outputs
• Provides automatic, nonrecycling control of an intermittent ignition oil burner system
• Controls oil burner, oil valve (if desired) and the ignition transformer in response to a call for heat
• Solid state flame sensing circuit
• Enclosed safety switch with external reset button
• Manual trip lever opens safety switch for system maintenance
• Mounts on standard 4 x 4" junction box, select models may be mounted directly on burner housing
• C554A cadmium sulfide flame detector and 24 VAC thermostat required
• 75 VA at 120/240 VAC, 50-60 Hz, 25 VA at 24V, 50-60 Hz alarm load ratings(pilot duty)
  

  Honeywell R75-44