Suntec J4 Fuel Oil Pump, 1/4 Inch NPTF x 1/8 Inch NPTF, 26 gph, 1725 rpm

• Single pipe gravity feed installations
• Two pipe lift installations to 12 Inch Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• Six pressure options, 10 to 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4 Inch NPTF 2 inlets and return port
• Left nozzle location

,
,

suntec p1-5

Suntec J4 Fuel Oil Pump, 1/4" NPTF x 1/8" NPTF, 12/44 gph, 1725/3450 RPM, Left Nozzle

• 1-pipe gravity feed installations
• 2 pipe lift installations to 12" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• 6-pressure options, 10 - 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4" NPTF 2 inlets and return port
• Left nozzle location

Sid Harvey Item #:P4-10: Replaces Part #:'s : P4-10R,

Suntec A2YA-7916 1-Stage Oil Pump, 7 gph Strainer and 7 gph at 100 psi, 3 gph at 200 psi Rated Nozzle, 3450 RPM, 10 psi Inlet and Return

• Right hand nozzle port location
• Has a unique circuit that exhibits a dependable cut-off, a high 1-pipe lift capacity and automatic 2-pipe purging
• The pump circuit contains a positive displacement involute gear set and two controlling valves
• Fuel oil #2 and lighter, not compatible for use with blends higher than 5% biodiesel
• 1-pipe system (2-pipe system possible)
• Diaphragm cut-off
• Pressure regulation valve function
• 5/16" diameter shaft

Sid Harvey Item #:P4-101: Replaces Part #:'s : P4-101R,
,

Sid Harvey P239-2 Sid Harvey Replacement Oil Pump for Oil Pumper System REMANUFACTURED,
,

Sid Harvey Remanufactured P239-2

Suntec B2TA-8851N 2-Stage Oil Pump for Use with Oil Burner, 5/16 Inch Shaft, 110 - 120 volt, 16 gph

• (2) bolt flange mount
• 1/8 Inch NPTF pressure gauge/bleeder valve port
• Valve function pressure regulation
• Cut-off solenoid, 7 gph strainer
• Pressure adjustable (100 - 200 psi low fire, 200 - 300 psi high fire)
• Suction height single pipe: 6 Inch height maximum vacuum, 2-pipe: 17 Inch height maximum vacuum, to prevent air separation from oil

,
,

Webster oil safety valves are ideal for use in oil supply systems which have from 0 to 60 psi supply line pressures on the inlet side of the valve. Requires a sustained VAC uum on the outlet side of the valve for fuel to flow to the burner pump. The OSV series provides automatic shut-off for the oil supply in case the line between the device and the burner is broken. Many state and local codes require such a device and also limits inlet pressure on burner pumps to a maximum of 3 psi. Available in 3/8 and 1/2 NPTF porting.

• Provide important protection in oil burner supply systems with pressurized supply lines
• By isolating burner fuel pumps from supply line pressure sources a supply pump or overhead tank, the osv relieves ores sure strain on fuel pump inlets and seals and prevents tank siphoning and spilling caused by accidental line breaks
• OSV is mounted close to burner assembly
• OSV operates as pressure reducer with supply line pressure on the valve inlet side and fuel pump VAC uum on the valve outlet side
• 3/8-18 NPTF port size

Sid Harvey Item #:P131-30: Replaces Part #:'s : P131-30,
,

Webster Fuel Pumps P131-30

Garber R Epoxy Coated Spin On Filter Gar-Ber Fits 1A-10GBK,
,

gar-ber r

Light and extremely compact, the Webster M series fuel units have earned a reputation for reliability and efficiency. All units include the Webster internal rotary filter. The rotary filter reduces the need for trouble some periodic cleaning. Because the filter blades rotate at motor speed with constant cleaning action, clogging is minimal compared to units that use internal filter screen. For maximum protection, an additional line filter is recommended in accordance with standard practice. Another popular feature is the easy to bleed valve assembly located on the side. A"D" drive reduces the harmful effects low-lubricity fuels had on previous key drive designs. Simple flange mounting and side located nozzle ports make the M Series ideal for fuel unit servicing.

• Nozzle port on right from the shaft end
• Standard lip seal, revised porting and bleed valve location
• Suction gear capacity is 35 gph at 100 psi
• Built in pressure regulator
• 1/8" NPTF side location nozzle port, top located gauge port
• 1/4" NPTF 2 inlets, and bottom return
• 5/16" diameter x 1.65" extension shaft from mounting face with keyless"D" drive
• Double lip Buna-N seal
• Self-cleaning rotary type internal filter
• 15" Hg vacuum inlet

Sid Harvey Item #:P6-46: Replaces Part #:'s : OPU833-P4-70R | P4-70 | P4-70R | P6-46R |,
,

Suntec A-7000 CW/RH Fuel Oil Pump, 1/4" NPTF x 1/8" NPTF, 7 gph, 1725 RPM

• Single pipe installations to 6" Hg vacuum
• Two pipe installations to 12" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Suitable for no. 2, no. 1 fuel oil, or kerosene
• Mounting in any position
• Factory set at 100 psi
• Adjustable range 100 - 150 psi at 3450 RPM, 100 - 135 psi at 1725 RPM, models available to 200 and 300 psi
• Right nozzle location

Sid Harvey Item #:P4-83: Replaces Part #:'s : OPU830-P4-83 | P4-83R |,
,

suntec p4-83

Tuthill P99-5 Oil Pump Tuthill 60 GPH,
,

Sid Harvey P4-196BR Oil pump 1-Stage B20 Compatible 3450 RPM W/Coil,
,