General Filters Gar-Ger M Epoxy Coated Commercial Replacement Oil Filter Cartridge, 35 micron, 35 gph

Recommended on units with either single or double-line systems firing up to 35 gph


general filters m

Beckett Parts PF20322U Oil Pump Clean Cut 1 Stage 3450 RPM Nozzle Right 4 GPM

beckett parts pf20322u

Beckett Parts PF20323 Fuel Oil Pump Clean-Cut 4 GPH 120 VAC

Beckett Parts PF20323

Beckett Parts PF20422U Oil Pump Clean Cut 2 Stage 3450 RPM Nozzle Right 4 GPM

beckett parts pf20422u

Beckett Parts PF10372U Clean-Cut Oil Pump Less Cord Set 12-24 VAC

Beckett Parts PF10372U

Carlin Parts PRO-x45000 Universal Ignitor

Carlin Parts PRO-X45000

Suntec PRV-38P Oil Safety Valve without Oil Filter, 3/8", FNPT

With shaft for attaching an oil filter
• Startup - can be manually bled or primed during start up
• Operation - requires fuel unit to provide Vacuum to open and make fuel available
• Provides - protection for line break
  

  Suntec PRV38P

Webster oil safety valves are ideal for use in oil supply systems which have from 0 to 60 psi supply line pressures on the inlet side of the valve. Requires a sustained Vacuum on the outlet side of the valve for fuel to flow to the burner pump. The OSV series provides automatic shut-off for the oil supply in case the line between the device and the burner is broken. Many state and local codes require such a device and also limits inlet pressure on burner pumps to a maximum of 3 psi. Available in 3/8 and 1/2 NPTF porting.

Provide important protection in oil burner supply systems with pressurized supply lines
• By isolating burner fuel pumps from supply line pressure sources a supply pump or overhead tank, the osv relieves ores sure strain on fuel pump inlets and seals and prevents tank siphoning and spilling caused by accidental line breaks
• OSV is mounted close to burner assembly
• OSV operates as pressure reducer with supply line pressure on the valve inlet side and fuel pump Vacuum on the valve outlet side
• 1/2 - 14 NPTF port size
  

  Webster Fuel Pumps P131-40

Suntec J4 Fuel Oil Pump, 1/4 Inch NPTF x 1/8 Inch NPTF, 26 gph, 1725 RPM

Single pipe gravity feed installations
• Two pipe lift installations to 12 Inch Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• Six pressure options, 10 to 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4 Inch NPTF 2 inlets and return port
• Left nozzle location
  

  suntec p1-5

Suntec J4 Fuel Oil Pump, 1/4" NPTF x 1/8" NPTF, 12/44 gph, 1725/3450 RPM, Left Nozzle

1-pipe gravity feed installations
• 2 pipe lift installations to 12" Hg vacuum
• Lift or gravity feed applications with 10 psi maximum inlet/return pressure
• Capacities to 60 gph
• 6-pressure options, 10 - 300 psi
• For no. 4 and lighter fuel oils (gasoline and JP fuels, special)
• Hub and flange mounting in any position
• 1/4" NPTF 2 inlets and return port
• Left nozzle location
  

  Suntec P4-10

Suntec A2YA-7916 1-Stage Oil Pump, 7 gph Strainer and 7 gph at 100 psi, 3 gph at 200 psi Rated Nozzle, 3450 RPM, 10 psi Inlet and Return

Right hand nozzle port location
• Has a unique circuit that exhibits a dependable cut-off, a high 1-pipe lift capacity and automatic 2-pipe purging
• The pump circuit contains a positive displacement involute gear set and two controlling valves
• Fuel oil #2 and lighter, not compatible for use with blends higher than 5% biodiesel
• 1-pipe system (2-pipe system possible)
• Diaphragm cut-off
• Pressure regulation valve function
• 5/16" diameter shaft
  

  Suntec P4-101