Brand Name
BTU Heat
Voltage
AFUE
Configuration
Stages
Communicating
Motor Type
CFM
Width
|◀ ◀ 289 - 300 of 315 ▶ ▶|
View:

Thermo Pride Gas Furnace Multi-Position

The Thermo Pride story - located right here in the United States, Thermo Products, makers of Thermo Pride heating and cooling equipment, is known for superior workmanship and product innovation. Thermo Products is committed to producing handcrafted products that provide your family with reliability, comfort, durability, quiet operation and high efficiency. You will have the peace-of-mind that comes from knowing your gas Thermo Pride mobile home furnace is anything but a mass-produced, low-cost compromise between quality and price. Reliability - whether you are upgrading to save energy or your current furnace has failed, you will want to replace it with one that is both dependable and economical. Thermo Pride mobile home furnaces are designed and built specifically as replacement furnaces, so you can easily upgrade the heating or cooling system in your home.
  • Integrated coil cabinet for easy air conditioning installation
  • Aluminized steel primary heat exchanger
  • Stainless steel secondary heat exchanger
  • Silicon nitride igniter for quiet and consistent light-off
  • 2-piece top design for easy access to vent pipes
  • Concentric vent kit available using existing roof jack and standard base
  • PVC venting
  • Lifetime heat exchanger warranty and 10 years parts warranty
Item#:
CLQS1-100T48N
Manufacturer Item:
CLQS1-100T48N
Manufacturer:
THERMO PRODUCTS, LLC
 
CLQS1-100T48N_Spec

Up To 92.1% Standard NOX Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Single-stage gas valve and fixed-speeds, constant torque ECM.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • NOx emissions less than 40 ng/J; can be installed in California air quality management districts with a 40 ng/J NOx emission limit.
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosion-resistant, prepainted steel cabinet

    • Item#:
    R92ESN0401410A
    Manufacturer Item:
    R92ESN0401410A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92ESN-ICP-Warranty_Misc
    R92ESN-ICP_Install
    R92ESN-ICP_Spec

    Up To 92.1% Standard NOX Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Single-stage gas valve and fixed-speeds, constant torque ECM.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • NOx emissions less than 40 ng/J; can be installed in California air quality management districts with a 40 ng/J NOx emission limit.
  • Flame roll-out sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control designed to prevent overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosion-resistant, prepainted steel cabinet

    • Item#:
    R92ESN0801716A
    Manufacturer Item:
    R92ESN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R92ESN-ICP-Warranty_Misc
    R92ESN-ICP_Install
    R92ESN-ICP_Spec

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 24-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN1202420A

    • Item#:
    N92MSN1202420A
    Manufacturer Item:
    N92MSN1202420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0801716A

    • Item#:
    N92MSN0801716A
    Manufacturer Item:
    N92MSN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0401712A

    • Item#:
    N92MSN0401712A
    Manufacturer Item:
    N92MSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0601412A

    • Item#:
    N92MSN0601412A
    Manufacturer Item:
    N92MSN0601412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement


    International Comfort Products N92MSN0401412A

    • Item#:
    N92MSN0401412A
    Manufacturer Item:
    N92MSN0401412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN0601714A

    • Item#:
    N92MSN0601714A
    Manufacturer Item:
    N92MSN0601714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement


    International Comfort Products N92MSN0802120A

    • Item#:
    N92MSN0802120A
    Manufacturer Item:
    N92MSN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN1002120A

    • Item#:
    N92MSN1002120A
    Manufacturer Item:
    N92MSN1002120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    Up to 92% Standard NOX Gas Heating Furnace 35" H x 14-3/16" W x 29-1/2" D

  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Singlestage gas valve and fixedspeeds, constant torque ECM
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOX emissions requirement.
  • Flame rollout sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosionresistant, prepainted steel cabinet
    • Item#:
    N92ESN0401410A
    Manufacturer Item:
    N92ESN0401410A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92ESN-Care_Misc
    N92ESN_Install
    N92ESN_Spec
    |◀ ◀ 289 - 300 of 315 ▶ ▶|
    View: