Brand Name
BTU Heat
Voltage
AFUE
Configuration
Stages
Communicating
Motor Type
CFM
Width
|◀ ◀ 13 - 24 of 303 ▶ ▶|
View:

QuietComfort 96 Heating Gas Furnace 35" H x 21" W x 29-1/2" D

  • Up to 96%+ AFUE in upflow and horizontal positions 95% AFUE in downflow
  • ION Communicating Control System
  • Variable-speed, constant airflow ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

    International Comfort Products F96CTN1002122A

    • Item#:
    F96CTN1002122A
    Manufacturer Item:
    F96CTN1002122A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F96CTN-ICP_Spec

    QuietComfort 96 Heating Gas Furnace 35" H x 21" W x 29-1/2" D

  • Up to 96%+ AFUE in upflow and horizontal positions 95% AFUE in downflow
  • ION Communicating Control System
  • Variable-speed, constant airflow ECM blower motor for extra SEER boost with select cooling equipment
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

    International Comfort Products F96CTN0802120A

    • Item#:
    F96CTN0802120A
    Manufacturer Item:
    F96CTN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F96CTN-ICP_Spec

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

    Quiet performance
  • Variable-speed, constant airflow (VCA) ECM blower motor and two-stage gas valve also provide enhanced levels of temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • Wi-Fi enabled remote access with the Ion System Control
  • 10-Year No Hassle Replacement Limited Warranty
  • 10-Year Parts Limited Warranty upon timely registration
  • Lifetime Heat Exchanger Limited Warranty upon timely registration

    • Item#:
    F80CTL0451712A
    Manufacturer Item:
    F80CTL0451712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F80CTL_Spec

    80% 18 Speed Ultra-Low NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    • Item#:
    R80MSU0601716A
    Manufacturer Item:
    R80MSU0601716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSU-ICP-Warranty_Misc
    R80MSU-ICP_Install
    R80MSU-ICP_Spec

    80% 18 Speed Ultra-Low NOX Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • 80% AFUE
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • R80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    • Item#:
    R80MSU0802120A
    Manufacturer Item:
    R80MSU0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    R80MSU-ICP-Warranty_Misc
    R80MSU-ICP_Install
    R80MSU-ICP_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Flame roll-out sensors standard
  • 24 VAC humidifier terminal and electronic air cleaner terminal
  • Certified to leak 2% or less of nominal air conditioning CFM delivered when pressurized to 1" water gauge with all present air inlets, air outlets and condensate drain port(s) sealed
  • Tougher - ECM blower motor, adjustable heating blower off delay, factory set blower on delay, RPJ aluminized steel heat exchanger, high temperature limit control prevents overheating, direct ignition with silicon nitride igniter, 1-piece preprinted steel cabinet
  • Quieter - in-shot burners, insulated blower compartment
  • Innovative knobs for easy door removal and secure attachment
  • Through the casing flue pipe for counterflow or horizontal applications with accessory
  • 4-position - upflow/downflow/horizontal installation
  • 3-position inducer elbow capability
  • Masonry chimney adapter available
  • Self diagnostics
  • Slide out blower assembly
  • ECM blower motor
  • 20 years heat exchanger and 10 years parts limited warranty with timely registration, 5 years parts limited warranty if not registered within 90 days of original installation
  • 4.5 - 13.6" WC inlet gas pressure
  • Low NOX>
    • Item#:
    N8MXL1352420A
    Manufacturer Item:
    N8MXL1352420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N8MXL1352420A-Care_Misc
    N8MXL1352420A_Install
    N8MXL1352420A_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193



    International Comfort Products N80MSN0451714A

    • Item#:
    N80MSN0451714A
    Manufacturer Item:
    N80MSN0451714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN1102120A

    • Item#:
    N80MSN1102120A
    Manufacturer Item:
    N80MSN1102120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0701716A

    • Item#:
    N80MSN0701716A
    Manufacturer Item:
    N80MSN0701716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
    • Item#:
    N80MSN1552420A
    Manufacturer Item:
    N80MSN1552420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN1352420A

    • Item#:
    N80MSN1352420A
    Manufacturer Item:
    N80MSN1352420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 14-3/16" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0701412A

    • Item#:
    N80MSN0701412A
    Manufacturer Item:
    N80MSN0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install
    |◀ ◀ 13 - 24 of 303 ▶ ▶|
    View: