Brand Name
BTU Heat
Voltage
AFUE
Configuration
Stages
Communicating
Motor Type
CFM
Width
|◀ 193 - 204 of 294 ▶|
View:
  • 80% AFUE
  • N80ESN, N80ESL
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • N80ESL - Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193


  • Item#:
    N80MSL1102420A
    Manufacturer Item:
    N80MSL1102420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • 80% AFUE
  • N80ESN, N80ESL
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • N80ESL - Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193


  • Item#:
    N80MSL0702116A
    Manufacturer Item:
    N80MSL0702116A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Singlestage gas valve and fixedspeeds, constant torque ECM
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOX emissions requirement.
  • Flame rollout sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosionresistant, prepainted steel cabinet
  • Item#:
    N92ESN0401712A
    Manufacturer Item:
    N92ESN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Item#:
    N80MSN0702116A
    Manufacturer Item:
    N80MSN0702116A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN0701412A

  • Item#:
    N80ESN0701412A
    Manufacturer Item:
    N80ESN0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • 80% AFUE
  • N80ESN, N80ESL
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner terminal
  • N80ESL - Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193

  • Item#:
    N80MSL0701412A
    Manufacturer Item:
    N80MSL0701412A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+

    International Comfort Products N96VSN0401712A

  • Item#:
    N96VSN0401712A
    Manufacturer Item:
    N96VSN0401712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+
  • Item#:
    N96VSN0601412B
    Manufacturer Item:
    N96VSN0601412B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Quiet performance
  • Variable 25-speed constant torque blower motor and single-stage gas valve also provide enhanced levels of temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving
  • heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • 10-Year Parts Limited Warranty upon timely registration
  • 20-Year Heat Exchanger Limited Warranty
  • Item#:
    N80VSL0701412B
    Manufacturer Item:
    N80VSL0701412B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193



    International Comfort Products N80MSN0902116A

  • Item#:
    N80MSN0902116A
    Manufacturer Item:
    N80MSN0902116A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    Quiet performance
  • Variable 25-speed constant torque blower motor and single-stage gas valve also provide enhanced levels of temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving
  • heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • 10-Year Parts Limited Warranty upon timely registration
  • 20-Year Heat Exchanger Limited Warranty
  • Item#:
    N80VSL0902120B
    Manufacturer Item:
    N80VSL0902120B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
  • Up to 92.1% AFUE in upflow, horizontal, and downflow positions
  • Singlestage gas valve and fixedspeeds, constant torque ECM
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Approved for Manufactured Housing/Mobile Home applications with accessory (order separately)
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOX emissions requirement.
  • Flame rollout sensors standard
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ primary heat exchanger
  • Stainless steel secondary heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • High quality, corrosionresistant, prepainted steel cabinet

  • Item#:
    N92ESN0802120A
    Manufacturer Item:
    N92ESN0802120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
    |◀ 193 - 204 of 294 ▶|
    View: