Brand Name
BTU Heat
Voltage
AFUE
Configuration
Stages
Communicating
Motor Type
CFM
Width
|◀ ◀ 169 - 180 of 294 ▶ ▶|
View:

Gas Furnace 45K BTU 95% 2-Stage Direct Vent Down-Flow

The high efficiency downflow gas furnace is designed for all manufactured housing applications. It may be installed in a utility room, or enclosed in a closet. CSA design certified for use in the United States and Canada.

MG2R045F1AAM2

Item#:
MG2R045F1AAM2
Manufacturer Item:
1036485
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
 
MG2R045F1AAM2

Nortek Gas Furnace Manufactured Housing Direct Vent

Nortek MG2R072F1AAM1 Gas Furnace 72K BTU 95% AFUE Direct Vent Downflow

Item#:
MG2R072F1AAM1
Manufacturer Item:
MG2R-072F1AAM1
Manufacturer:
NORTEK GLOBAL (INTERTHERM)
 
MG2R072F1AAM1_Spec

80% Standard NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet
    • Item#:
    N80ESN0901714A
    Manufacturer Item:
    N80ESN0901714A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0901714A_Spec

    Up to 92% Multi 18 Speed Gas Heating Furnace 35" H x 24-1/2" W x 29-1/2" D

  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Up to 92.1% AFUE in upflow, horizontal and downflow positions
  • Single-stage gas valve
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for manufactured housing/ mobile home applications with accessory (order separately)
  • Select sizes approved for twinning, refer to accessory kit listing
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement

    International Comfort Products N92MSN1202420A

    • Item#:
    N92MSN1202420A
    Manufacturer Item:
    N92MSN1202420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N92MSN-Care_Misc
    N92MSN_Install

    96% Direct Vent 2-Pipe Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

  • Up to 97% AFUE in upflow/horizontal, up to 95% AFUE in downflow
  • Multi 18-speed, constant torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and status
  • Supports single-stage cooling units
  • Insulated heat exchanger compartmen
    t
  • All sizes can be installed in air quality management districts with a 40 ng/J
  • NOx emissions requirement
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Approved for twinning applications (0601716, 0801716, 0802120, 1002120, 1202422, 1402422) with accessory (order separately)
  • Approved for manufactured housing/mobile home applications (0401410 through 1202422) with accessory (order separately)

    International Comfort Products N96MSN0801716A

    • Item#:
    N96MSN0801716A
    Manufacturer Item:
    N96MSN0801716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96MSN-Care_Misc
    N96MSN_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0701712A

    • Item#:
    N80MSN0701712A
    Manufacturer Item:
    N80MSN0701712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 24-1/2" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    • Item#:
    N80MSN0902420A
    Manufacturer Item:
    N80MSN0902420A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    96% Performance Series Gas Heating Furnace 35" H x 17-1/2" W x 29-1/2" D

    Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Variable 25-speed blower motor and single-stage gas valve also provide enhanced levels of even temperature control and comfort
  • Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
  • Lifetime Heat Exchanger Limited Warranty upon timely registration+Dual fuel capable with a compatible heat pump and thermostat for energy-saving heating performance
  • Fully insulated cabinet helps keep the heat moving to your ductwork
  • Air purifier and humidifier compatible
  • High temperature limit control prevents overheating
  • 10-Year Parts Limited Warranty upon timely registration+
    Lifetime Heat Exchanger Limited Warranty upon timely registration+
    • Item#:
    N96VSN0801716B
    Manufacturer Item:
    N96VSN0801716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96VSN_SPEC

    96% Gas Heating Furnace

  • Up to 97.0% AFUE in upflow and horizontal positions, 95% AFUE in downflow position
  • Variable-speed, constant torque ECM blower motor
  • Supports single-stage and two-stage cooling units
  • Dehumidification feature in cooling
  • All sizes can be installed in air quality management districts with a 40 ng/J NOx emissions requirement
  • Cabinet air leakage less than 2.0%
    at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193
  • Control of continuous fan speed from a compatible thermostat

    • Item#:
    N96VSN0601716B
    Manufacturer Item:
    N96VSN0601716B
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N96VSN0601716B_Spec

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet
    • Item#:
    N80ESN0701716A
    Manufacturer Item:
    N80ESN0701716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0701716A_Spec

    80% Category I Venting Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • Multi 18-Speed, Constant Torque (MCT) ECM blower motor
  • Enhanced diagnostics with easy to read 3 digit display for faults and Status
  • 80% AFUE
  • Flame roll-out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC humidifier terminal
  • Electronic air cleaner terminal
  • Select sizes approved for twinning, refer to accessory kit listing
  • N80MSL - Low NOx units are designed for California installations and can be installed in air quality management districts with a 40ng/J NOx emissions limit
  • Cabinet air leakage less than 2.0% at 1.0 in. w.c. and cabinet air leakage less than 1.4% at 0.5 in. w.c. when tested in accordance with ASHRAE standard 193

    International Comfort Products N80MSN0902120A

    • Item#:
    N80MSN0902120A
    Manufacturer Item:
    N80MSN0902120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80MSN-ICP-Care_Misc
    N80MSN-ICP_Install

    80% Standard NOX Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Flame roll--out sensors standard
  • Category I venting
  • Blocked vent switch
  • Louvered door
  • 24 VAC and 115 VAC humidifier terminal
  • Electronic air cleaner termina
  • l
  • N80ESL -- Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Adjustable heating blower OFF delay
  • Factory set blower ON delay
  • RPJ aluminized steel heat exchanger
  • High temperature limit control prevents overheating
  • Direct ignition with Silicon Nitride ignitor
  • One piece prepainted steel cabinet

    International Comfort Products N80ESN0701712A

    • Item#:
    N80ESN0701712A
    Manufacturer Item:
    N80ESN0701712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    N80ESN-ICP-Care_Misc
    N80ESN-ICP_Install
    N80ESN0701712A_Spec
    |◀ ◀ 169 - 180 of 294 ▶ ▶|
    View: