Thermo Pride has listened to your concerns about comfort and has met your demands for the best, most reliable, and efficient furnaces and cooling systems. Every Thermo Pride product is built with traditional, dependable craftsmanship. What this means to you is quiet, reliable, long lasting performance. Lowboy furnaces are shorter in height with the blower in back of the heat exchanger. They are typically used for basement room installations with low-height restrictions. The OL6 comes with a factory standard PSC blower motor but can be upgraded to the optional ECM blower motor for quieter start up, greater efficiency, and more comfortable operation due to infinite fan motor speeds.

• Lowboy with psc direct drive blower motor
• Front flue
• Burner in separate box

,
,

Thermo Pride OL6FA072D48

Modine PDP175 Power-Exhausted Propeller Natural Gas Fired Unit Heater, 175000 BTU Input, 140000 BTU Output

• 80% thermal efficiency for fuel savings
• Light-weight, easily installs 1" from ceiling with only two angle bracket
• Install quickly and easily with knockouts for quick access to gas and electricity
• The standard power exhauster allows the unit to be vented vertically or horizontally and is designed to use the smallest diameter vent pipe possible
• Permanently-lubricated motor for trouble-free dependability
• 10 years warranty on heat exchanger

Sid Harvey Item #:832-35: Replaces Part #:'s : L96-837,
,

Thermo Pride OH8FA119DV5 Highboy Oil Furnace, 85% AFUE, 120 volt, 156250/140000/119000 BTU Input, 132000/120000/101000 BTU Output,

,

Modine PDP150AE0130 Polyester Powder Painted 20 ga Aluminized Steel Cabinet 1-Stage High Efficiency Power Vented Natural Gas Fired Unit Heater, 150000 BTU Input, 120000 BTU Output

• 80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
• A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
• A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field-converted to propane, if desired
• A safety pressure-switch to assure safe venting conditions
• Designed to utilize the smallest-diameter vent pipe possible
• "Wing" screws so that the bottom pan can be dropped without a screwdriver or nut driver
• A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's centre of gravity
• Aluminized steel heat exchanger/burner
• A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
• All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions
• The PDP (propeller) high efficiency II gas-fired unit heaters are a generation of products that are inexpensive to install, easy to use and offer excellent in-service economy

Sid Harvey Item #:832-34: Replaces Part #:'s : L96-836,
,

Modine's Hot Dawg is widely recognized as the industry's most popular residentially-certified gas-fired unit heater. It is an ideal solution for residential garages and workshops, along with light commercial or industrial applications.

• Use your workspace - comfortably - year-round
• Only Modine offers numerous colors and appearance kits, letting you heat your space in style
• Free up more workspace by getting rid of space heaters that clutter up the area
• Quieter garage with the hot dawg thanks to noise levels less than other units
• Trouble-free motor dependability
• Simplified side-wall or roof venting with small-diameter vent pipes
• Tubular power vented propeller unit
• Hush-puppy quiet operation
• 10 years warranty on heat exchanger
• Lightweight, easy installation 1" from ceiling
• Power vented model simplifies side-wall or roof venting with small-diameter vent pipe
• Permanently lubricated motor
• Controls can be either single or 2-stage, direct spark ignition, 100% shut-off with continuous retry
• Aluminized heat exchanger

,

,

Thermo Pride OH8FA119D60 Highboy Oil Furnace, 85.8% AFUE, 120 volt, 156250/140000/119000 BTU Input, 132000/120000/101000 BTU Output

• Front flue
• With Beckett burner
• High efficiency flame retention Beckett burner
• Dual service/clean-out ports placed for easy access
• 5 Ton cooling capacity
• Burner and controls enclosed in vestibule for safety and quiet operation
• Advanced high efficiency controls mounted at the front of cabinet for easy setup and access
• 20" width x 20" depth supply air outlet
• 23" height x 14" depth return air outlet
• 7" flue diameter
• Rounded corners and interlocking cabinet panels give added stability and quiet operation
• 13 ga octatherm heat exchanger delivers higher efficiency and combustion observation port for easy burner calibration
• 8-heat exchanger size identifier
• Exclusive copper coated heat exchanger provides corrosion resistance and superior heat transfer,
  ,
  
  
  

  thermo pride oh8fa119d60

Modine Hot Dawg HD125A Power Vented Gas Fired Unit Heater, 115 volt, 125000 BTU Input, 102500 BTU Output

• Use your workspace - comfortably - year-round
• Only Modine offers numerous colors and appearance kits, letting you heat your space in style
• Free up more workspace by getting rid of space heaters that clutter up the area
• Quieter garage with the hot dawg thanks to noise levels less than other units
• Trouble-free motor dependability
• Simplified side-wall or roof venting with small-diameter vent pipes
• Tubular power vented propeller unit
• Hush-puppy quiet operation
• 10 years warranty on heat exchanger
• Lightweight, easy installation 1" from ceiling
• Power vented model simplifies side-wall or roof venting with small-diameter vent pipe
• Permanently lubricated motor
• Controls can be either single or 2-stage, direct spark ignition, 100% shut-off with continuous retry
• Aluminized heat exchanger

Sid Harvey Item #:HD125: Replaces Part #:'s : 38466
,
,

Thermo Pride has listened to your concerns about comfort and has met your demands for the best, most reliable, and efficient furnaces. When you want to experience exceptional comfort, increased efficiency, and handcrafted quality along with the proven warranty of Thermo Pride, but have limited space, select the low profile OH6 oil furnace. Youll be sure to receive quiet, reliable, long lasting performance from your home heating system that is specifically designed to meet your homes needs. The OH6 is designed to fit nicely in your low ceiling basement since it is 11" shorter than a typical highboy furnace. Offered with a factory-standard PSC blower motor for high-reliability and factory-standard cost savings.

• The OH6 is offered with a factory-standard PSC blower motor for reliability and cost savings
• It is designed to fit nicely in your low ceiling basement since it is 11" shorter than a typical highboy furnace
• Compatible with the new more efficient air conditioners (the new AC evaporator coils are much taller than older coils)
• Features easier servicing due to improved heat exchanger cleanout locations, which also means a savings for you
• Utilizes the Thermo Pride 13 ga copper coated octatherm heat exchanger
• Front flue
• Highboy with psc direct drive blower motor
• Low profile burner in separate
• Burner in separate box

,
,

Thermo Pride OH6FA072DV4

Modine HD100LP Hot-Dawg Power Vented Unit Heater Separated Combustion LP Gas 100k
,
,

Thermo Pride has listened to your concerns about comfort and has met your demands for the best, most reliable, and efficient furnaces. When you want to experience exceptional comfort, increased efficiency, and handcrafted quality along with the proven warranty of Thermo Pride, but have limited space, select the low profile OH6 oil furnace. Youll be sure to receive quiet, reliable, long lasting performance from your home heating system that is specifically designed to meet your homes needs. The OH6 is designed to fit nicely in your low ceiling basement since it is 11" shorter than a typical highboy furnace. Offered with a factory-standard PSC blower motor for high-reliability and factory-standard cost savings.

• The OH6 is offered with a factory-standard PSC blower motor for reliability and cost savings
• It is designed to fit nicely in your low ceiling basement since it is 11" shorter than a typical highboy furnace
• Compatible with the new more efficient air conditioners (the new AC evaporator coils are much taller than older coils)
• Features easier servicing due to improved heat exchanger cleanout locations, which also means a savings for you
• Utilizes the Thermo Pride 13 ga copper coated octatherm heat exchanger
• Front flue
• Highboy with psc direct drive blower motor
• Low profile burner in separate
• Burner in separate box

,
,

Thermo Pride OH6FA072D48