|◀ ◀ 37 - 48 of 659 ▶ ▶|
View:

80% Variable Speed Gas Heating Furnace 33-1/3" H x 21" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0902120A

    • Item#:
    G80CTL0902120A
    Manufacturer Item:
    G80CTL0902120A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    Oil Furnace Hi-Boy 97-101K BTU Output 85-86.2% AFUE 120 VAC 6" Flue Direct Drive

    Williamsom-Thermoflo CHB-105-DD-x-W-S2 Powder Coat Paint Oil Furnace, 85.9% AFUE, 91000/105000/119000 BTU Input, 79100/89400/101100 BTU Output, 1300 cfm

    williamson -thermoflo chb105ddxws2

    Item#:
    CHB105DDXWS2
    Manufacturer Item:
    CHB105DDXWS2
    Manufacturer:
    WILLIAMSON -THERMOFLO
     
    CHB-Direct-Drive-Manual_Misc
    CHB-Series_Spec
    CHB-Variable-Drive-Manual_Misc

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0901716A

    • Item#:
    G80CTL0901716A
    Manufacturer Item:
    G80CTL0901716A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    Unit Heater Natural Gas Power Vented 225K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)

    Reznor UDAP-225

    • Item#:
    UDAP-225
    Manufacturer Item:
    UDAP-225
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec

    Oil Furnace Lo-Boy Rear Flue 153K BTU 85% ECM Motor Less Burner

    Thermo Pride OL20RA151T60 Oil Furnace Rear Flue 153K BTU 85% ECM Motor Less Burner,

    Thermo Pride OL20RA151T60

    Item#:
    OL20RA151T60
    Manufacturer Item:
    OL20RA151T60
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    OL20RA151T60

    Oil Furnace Lo-Boy Front Flue 153K BTU 85% ECM Motor Less Burner

    Thermo Pride OL20FA151T60 Oil Furnace Lo-Boy Front Flue 153K BTU 85% ECM Motor Less Burner

    Thermo Pride OL20FA151T60

    Item#:
    OL20FA151T60
    Manufacturer Item:
    OL20FA151T60
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    OL20FA151T60

    80% Variable Speed Gas Heating Furnace 33-1/3" H x 17-1/2" W x 29" D

  • 80% AFUE
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193
  • Supports twostage cooling units
  • ION Communicating Control System
  • Observer Communicating Control System
  • Flame rollout sensors standard
  • Category I venting
  • Blocked vent switch
  • Dehumidification feature in cooling
  • 24 VAC humidifier termina
    l
  • Electronic air cleaner terminal
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.

    International Comfort Products G80CTL0451712A

    • Item#:
    G80CTL0451712A
    Manufacturer Item:
    G80CTL0451712A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    G80CTL-ICP-Care_Misc
    G80CTL-ICP_Install
    G80CTL-ICP_Spec

    Oil Furnace Horizontal 87.7 % AFUE 60K BTU Output 120 VAC ECM Motor Less Burner

    Thermo Pride OD6RA072DV5 Oil Furnace Horizontal 87.7 % AFUE 60k BTU Output 120 VAC,

    Thermo Pride OD6RA072DV5

    Item#:
    OD6RA072DV5
    Manufacturer Item:
    OD6RA072DV5
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    OD6RA072DV5

    Unit Heater Natural Gas Power Vented 30K BTU 120 VAC Multi-Try Direct Spark Ignition

  • Reznor V3 Series Model UDAP gas-fired unit heaters are available in 14 sizes ranging from 30,000 to 400,000 BTUH gas input. All sizes are approved for commercial/industrial installations. Sizes 30-125 carry an additional approval for use in attached residential garage/workshop application. Model UDAP heaters are designed for 82-83% thermal efficiency and are approved for installation in the United States and Canada by the Canadian Standards Association (CSA).
  • Reznor V3 Series unit heaters have a refreshing new appearance with a glossy white cabinet finish and less visible hardware. Each size cabinet is easily suspended from either 2 or 4 suspension points. Or, an optional hanger kit for Sizes 30-125 allows for ceiling mounting. The low voltage terminal strip on the outside of the cabinet makes connecting control wiring easy with no panels to remove. The addition of a G terminal to the strip, along with the new design of the circuit board, allows for fan only operation (without adding relays). All units have a factory installed gas line nipple to the exterior of the cabinet for easy gas service connection.
  • The preeminent new internal feature is the Tcore2 heat exchanger and single burner combustion system. Other standard features include a single-stage gas valve, multi-try direct spark ignition with timed lockout, pressure switch to verify vent flow, resiliently isolated venter motor, venter wheel with improved housing, resiliently isolated axial fan and motor assembly, and a high temperature limit control. Sizes 30-125 also include a flame rollout safety switch. Operation is controlled through an integrated circuit board. The circuit board monitors heater operation and has LED diagnostic indicator lights to identify abnormalities in control functions.
  • The V3 Series unit heaters are designed to provide all the features you expect in a Reznor heater plus improved efficiency, easier installation, and a new look ~ both inside and out. Look for the unique white unit with no visible front and bottom hardware, deep red louvers, black side handle, and angled corner to know you have a genuine Reznor heater.
  • Sizes 30-400 certified for commercial/industrial heating application
  • Sizes 30-125 carry an additional approval for use in residential garage/workshop heating applications
  • 82-83% Thermal efficient ~ TOP in its class!
  • 50-60°F Rise range
  • Tcore2 titanium stabilized aluminized steel heat exchanger
  • Patented A single burner combustion system including a one-piece burner assembly
  • 115/1/60 Supply voltage
  • 115 Volt open fan motor with internal overload protection
  • Transformer for 24-volt controls
  • Integrated circuit board with diagnostic indicator lights
  • Multi-try direct spark ignition with timed lockout
  • Fan relay (included on the circuit board)
  • Single-stage natural gas valve (field adjustable for operation to 9,000 ft. elevation ƒ)
  • Vibration/noise isolated fan and venter motors ~ designed for low noise operation
  • 2-pt and 4-pt Suspension ~ standard on all sizes
  • External terminal strip for 24-volt wiring
  • External gas connection
  • Full fan guard ~ engineered for safety
  • Improved cabinet design with less visible hardware
  • Single-stage, propane gas valve (field adjustable for operation to 9,000 ft. elevation B)
  • Two-stage natural gas or propane gas valve - Sizes 60-400
  • 409 or 316 Stainless steel heat exchangers
  • Totally enclosed fan motor (Sizes 30-250, 115V only)
  • Common venting with other gravity vented Category I appliance(s) (Sizes 30-100)

    Reznor UDAP-30

    • Item#:
    UDAP-30
    Manufacturer Item:
    UDAP-30
    Manufacturer:
    REZNOR LLC
     
    UDAP-Series-Parts_Misc
    UDAP-Series_Broc
    UDAP-Series_Install
    UDAP-Series_Spec

    Oil Furnace Horizontal 87.7 % AFUE 60K BTU Output 120 VAC (BURNER NOT INCLUDED)

    Thermo Pride counterflow/horizontal furnaces can be mounted horizontally where height restrictions are paramount. For instance in a basement crawl space or attic. Most furnaces draw cold air in at the bottom and warm air is released out the top. In certain situations, this is not practical and a counterflow or ("downflow") furnace is needed. In a counterflow furnace, cold air is drawn in from the top and warm air is released out the bottom. The OD6 comes with a factory standard PSC blower motor but can be upgraded to the optional ECM Blower Motor for quieter start up, greater efficiency, and more comfortable operation due to infinite fan motor speeds.

    Larkin LEL0065BS6EEAB0400

    Item#:
    OD6RA072D48
    Manufacturer Item:
    OD6RA072D48
    Manufacturer:
    THERMO PRODUCTS, LLC
     
    OD6RA072D48_Spec

    Unit Heater Propeller Type Natural Gas 400K BTU 6" 120 VAC

    Modine PDP400AE0130 Baked-On Polyester Powder Painted 20 ga Aluminized Steel Cabinet 1-Stage Gas Fired High Efficiency Power Vented Propeller Unit Heater, 400000 BTU
      80% thermal efficiency, maximizing seasonal efficiency through the use of a collector box and the power exhauster
    • A power exhaust that can be rotated 180 deg, the unit can be vented vertically or horizontally
    • A 100% shut-off, intermittent pilot-ignition system with continuous retry, at no extra charge, this ignition system allows for all PDP/BDP units to be field-converted to propane, if desired
    • A safety pressure-switch to assure safe venting conditions
    • Designed to utilize the smallest-diameter vent pipe possible
    • "Wing" screws so that the bottom pan can be dropped without a screwdriver or nut driver
    • A levels hanging mechanism for easy field adjustments after adding accessories that may change the unit's centre of gravity
    • Aluminized steel heat exchanger/burner
    • A automatic reset vent pressure switch is supplied on all power vented unit heaters to prevent operation of the main burner in the event there is restricted venting of flue products
    • All power vented unit heaters are supplied with a round vent pipe connection, power exhauster may be rotated 180 deg to allow for various venting directions

      Modine 832-40

    Item#:
    832-40
    Manufacturer Item:
    43718
    Manufacturer:
    MODINE MFG COMPANY
     
    Modine-Catalog_Misc

    Ion 98 Variable-Speed Modulating Gas Heating Furnace 35" H x 21" W x 29-1/2" D

  • Up to 98% AFUE in upflow and horizontal positions
  • Up to 96.7% AFUE in downflow
  • Modulating heating operation (40% - 100% capacity)
  • ION Communicating Control System
  • Observer Communicating Control System
  • Xtra SEER Variable Speed ECM blower motor
  • Supports single- and two-stage cooling units
  • Dehumidification feature in cooling
  • Low NOx units are designed for California installations and meet 40 ng/J NOx emissions. Can be installed in air quality management districts with a 40 ng/J NOx emissions requirement.
  • Cabinet air leakage less than 2.0% at 1.0 in. W.C. and cabinet air leakage less than 1.4% at 0.5 in. W.C. when tested in accordance with ASHRAE standard 193


    International Comfort Products F97CMN1002122A

    • Item#:
    F97CMN1002122A
    Manufacturer Item:
    F97CMN1002122A
    Manufacturer:
    INTERNATIONAL COMFORT PRODUCTS
     
    F97CMN-ICP_Spec
    |◀ ◀ 37 - 48 of 659 ▶ ▶|
    View: